• Journal of the Korea Institute of Building Construction
• /
• v.2 no.4
• /
• pp.89-98
• /
• 2002

Self-leveling material(SLM) is one of the floor finishing materials which make flat surface like as water level by itself in a short time. So it is possible to increase construction speed and enhance economical efficiency In this study, author intended to develop SLM for the industrial warehouse and factory loading heavy weight machinery and vehicles. The demanded properties for this type of SLM are above 200mm of flow value and above 300kgf/$cm^2$ of 28-days compressive strength. To possess demended strength and fluidity, SLM have to be composed of many types of binders and chemical additives. So it is difficult to decide suitable mixing proportion of composition materials. In this study, author investigated the weight percentage effect of main composition materials for high-strength self-leveling material, by experimental design such as tables of orthogonal arrays and simplex design, and by statistical analysis such as analysis of variance and analysis of response surface. Variables of experiments were ordinary Portland cement(OPC), alumina cement(AC), anhydrous gypsum(AG), lime stone(LS) and sand, and properties of tests were fluidity of fresh state and strength of hardened state. Results of this study are showed that suitable mix proportions of binders for the high strength self-leveling materials are two groups. One is 78~85.5% OPC, 7.5~9.5% AC, 9~12.5% AG and the other is 72.5~78% OPC, 9~12.5% AC, 13~15% AG.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.114-122
• /
• 2001

The purpose of this study was to manufacture sintered lightweight aggregate using paper sludge ash and to evaluate the qualities of the aggregate according to various mix proportions, conditions of pelletization and sintering. The paper sludge ash alone, due to its mineral and chemical compositions could not gain suitable expansion and strength. Hence, it was essential to add mineral additives such as clay, fly ash etc. The optimum muting ratio range determined in this study is as follows , paper sludge ash 30∼50 %, clay 30∼50 %, fay ash 0∼40 %, Paper sludge 0∼10% and hematite 2∼3 %(for manufacturing lightweight aggregate both for non-structural and structural concrete). It was possible to manufacture various lightweight aggregate whose dry specific gravity ranged about from 0.6 to 1.4 by using this optimum mixing ratio. From the test results of the qualities of aggregate, it showed that the 10% granules crushing value test and water absorption percentage ranged about 5∼10 ton and 10∼20%. Thus, it was favorably comparable to those of the imported aggregate. The manufactured lightweight aggregate could be used for structural concrete and non-structural concrete.

• KSBB Journal
• /
• v.21 no.2
• /
• pp.129-132
• /
• 2006

The importance of natural preservative has increased in recent years. The natural preservatives have been used in the field of foods, cosmetics and pharmacology. In the present work Artemisia sp., well recognized for their effect of antimicrobial activity, were extracted by methanol and water sequentially for selecting only water-soluble compounds that can be used as additives in food and cosmetics. Antimicrobial activities of water extracts from stem and leaf of Artemisia princeps var. orientalis were investigated by the disc diffusion method. Two gram positive bacteria(Staphylococcus aureus and Bacillus subtilis) and three gram negative bacteria(Escherichia coil, Agrobacterium tumefaciens and Pseudomonas putida) were used for antimicrobial activity studies. The water-soluble compounds from methanol extract showed higher antimicrobial activity than only water extract to these bacteria. Comparative evaluation of water-soluble metabolite profiles with caffeic acid that is known as an antimicrobial compound from Artemisia sp. was performed by high performance liquid chromatography with photo-diode array detection.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.730-735
• /
• 2013

The physical properties of poly(vinyl alcohol) (PVA) with polyamide-epichlorohydrin (PAE) for wet strength additives in paper industry were investigated. Upon introducing PAE to PVA, not only melting and crystallization enthalpy in DSC but also the area of diffraction peaks in XRD decreased, which represented the fact that PAE acted as a crosslinking agent for PVA. However, this crosslinking seemed to be physical crosslinking having relatively less bonding energy compared to chemical crosslinking since the crystallization in PVA was able to take place by thermal annealing. This physical crosslinking and crystallization by thermal annealing enhanced the thermal stability and mechanical strength in PVA and consequently, these improvements are desired in the paper manufacturing process to increase the dry and wet strength in the paper.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.126-132
• /
• 2014

The P-T characteristics of mixed refrigerant in thermostatic expansion valve sensing bulb were studied using R-134a and R-410A refrigerant. The characteristics of mixed refrigerant were investigated according to pressure variation and the variation of composition ratio of R-134A and R-410A in the temperature range of $-15^{\circ}C{\sim}15^{\circ}C$. The Thermodynamic characteristic values of the mixed refrigerants were identified using the characteristic value analysis program of mixed refrigerant(Refrop v9.0, NIST). The P-T characteristics in the case of the mixing ratio of 90:10 for R-410A and R-134A were the same result as R-22. And the physical properties showed similar results with R-22. The Maximum operating pressure(MOP) of mixed refrigerant showed a tendency to decrease with decreasing the mixing ratio of additive gases($N_2$ or He) gases. The characteristics in the case of the mixing ratio of 80:1 for mixed refrigerant and additive gases were the similar result as Reference refrigerant.(R-22 MOP, Sporlan company) In addition $N_2$ and He, both showed the same results. It was able to confirm that a MOP on the thermostatic expansion valve sensing bulb can be maintained by adjusting the mixing ratio of mixed refrigerant gases and additive gases.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.3
• /
• pp.7-16
• /
• 1997

The constituents of deposits on paper machine and holes/spots in paper have been studied by consequently a combination of analytical techniques, such as FTIR, Py-GC-MS, and. EDS. FTIR spectroscopy was used prior to Py-GC-MS and EDS analysis, as preliminary analysis technique. The analysis of organic components were carried out with the use of a pyrolysis unit connected to a GC-MS, and inorganic components in ash were analysed by SEM equipped with an EDS analyzer after pyrolysis at 59$0^{\circ}C$. The deposits on the dryer section were complex pitch, which was the mixture of the organic contents of fatty acid ester and starch, and the inorganic contents of talc, clay, and calcium carbonate. The complex pitch was estimated to come from the coated broke. We knew the deposits on the metering rod of sym-sizer were associated with the interaction of unstable AKD and CaCO$_3$. The compositions of holes or spots varied considerably and were associated with chemical interaction within the system. The holes, spots, and blotches in the finished paper were PE and PP that were streamed out from pulp sources, complex pitch that were caused by the interaction of the different additives in the system, polymer such as flexible PVC that used for the prop of palette, and hot melt as adhesives that came from the inadequate handling of broke. In addition, we identified that poly(caprolactam) which is used for forming fabrics or press felts, could be mixed with the raw materials by accident and results in streak on coating.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.9-18
• /
• 2014

London Convention on the prevention of marine pollution by dumping of wastes and other matter prohibits the deliberate disposal of paper mill sludges at sea. In order to explore the alternative plan on the prohibition of sludge disposal at sea, the biodegradable seedling pot was developed by mixing the sludge with old newspaper (ONP) in appropriate mixing ratios. The C/N ratio of the mixed sludge was below 20, leading to rapid deterioration of the organic matters composing the seedling pot. The increased ONP contents in the seedling pot resulted in the increase of pot thickness and thereafter in the decrease of pot density. Cellulose fibers in ONP promoted water absorption of the pot but AKD addition helped the seedling pot to repel water during raising seedling. Breaking length and burst strength of the seedling pot were improved by addition of wet strength additives but air permeability was a little diminished. Biodegradable rate of the seedling pot in a soil was accelerated by the attack of soil microbes at the beginning, and finally the pot was completely degraded in 150 days in a soil.

• Korean Journal of Materials Research
• /
• v.24 no.5
• /
• pp.255-258
• /
• 2014

Zirconium boride is an artificial or which is rarely found in the nature. $ZrB_2$ is popular in the hard material industry because it has a high melting point, excellent mechanical properties and chemical stability. There are two known methods to synthesize $ZrB_2$. The first involves direct reaction between Zr and B, and the second is by reduction of the metal halogen. However, these two methods are known to be unsuitable for mass production. SHS(Self-propagating High-temperature Synthesis) is an efficient and economic method for synthesizing hard materials because it uses exothermic reactions. In this study, $ZrB_2$ was successfully synthesized by subjecting $ZrO_2$, Mg and $B_2O_3$ to SHS. Because of the high combustion temperature and rapid combustion, in conjunction with the stoichiometric ratio of $ZrO_2$, Mg and $B_2O_3$; single phase $ZrB_2$ was not synthesized. In order to solve the temperature problem, Mg and NaCl additives were investigated as diluents. From the experiments it was found that both diluents effectively stabilized the reaction and combustion regime. The final product, made under optimum conditions, was single-phase $ZrB_2$ of $0.1-0.9{\mu}m$ particle size.

• Korean Journal of Materials Research
• /
• v.17 no.10
• /
• pp.560-566
• /
• 2007

AlN plates were fabricated by hot pressing at $1700-1900^{\circ}C$ using yttria and alumina (3 and $10\;{\mu}m$ particle size) powders as additives and characterized: density, thermal conductivity, transverse rupture strength, and grain size measurement by SEM and EDS. Density values of $3.31-3.34\;g/cm^3$ are largely attributed to hot pressing of powder mixtures in carbon mold under $N_2$ atmosphere which caused effective degree of oxygen removal from yttrium-aluminate phase expected to form at $1100^{\circ}C$. The grain size of hot pressed AlN was almost homogeneous, with size approximately from 3.2 to $4.0\;{\mu}m$ after hot pressing. $Al_2O_3$ powder of $3\;{\mu}m$ particle size resulted in better transverse rupture strength and finer grain size compared to $10\;{\mu}m$ $Al_2O_3$ powder. The thermal conductivity of AlN ranged between $83-92.7\;W/m{\cdot}K$ and decreased with $Al_2O_3$ addition. Fine grain size is preferred for better mechanical properties and thermal conductivity.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.20-26
• /
• 2014

The interaction of p-halogenated phenol derivatives with the micellar system of tetradecyltrimethylammonium bromide (TTAB) was studied by the UV/Vis spectrophotometric method. Effects of substituents, additives, and temperatures on the solubilization of phenol derivatives have been measured. The results show that all the values of ${\Delta}G^o$ and ${\Delta}H^o$ were negative and the values of ${\Delta}S^o$ were positive for all phenol derivatives within the measured temperature range. The calculated thermodynamic parameters depended on the size, the electro-negativity, and the hydrophobic property of halogen substituents. The addition of n-butanol results in the decrement in tthe Ks values and the addition of NaCl caused the increment in the Ks values for all the phenol derivatives. From these changes we can postulate that the solubilization sites of the phenol derivatives in the micelle depend severely on properties of the halogen-substituent.