• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.3
• /
• pp.423-431
• /
• 2022

The UPS(Uninterruptible Power Supply) system operates in the battery charging mode when the grid is normal, and in the UPS mode, which is the battery discharge mode when a grid error occurs. Since the UPS must supply the same voltage as the grid to the load within 4 [ms] in case of a grid error, the switching time and power recovery time should be short when controlling the output voltage and current of the UPS, and the power failure detection time is also important. The power outage detection algorithm using DFT(Discrete Fourier Transform) proposed in this paper compares the grid voltage waveform with the voltage waveform including the 9th harmonic generated through DFT using Schmitt trigger to detect power outage faster than the existing power outage monitoring algorithm. There are advantages. Therefore, it is possible to supply instant and stable power when switching modes in the UPS system. The multi-power-applied UPS system proposed in this paper uses DFT, which is faster than the conventional blackout monitoring algorithm in detecting power failure, to provide stable power to the load in a shorter time than the existing power outage monitoring algorithm when a system error occurs. The detection method was applied. The changeover time of mode switching was set to less than 4 [ms], which is 1/4 of the system cycle, in accordance with KSC 4310 regulation, which was established by the Industrial Standards Council on the regulation of uninterruptible power supply. A 10 [kW] UPS system in which commercial voltage, vehicle generator, and auxiliary diesel generator can be connected to each of the proposed transfer devices was constructed and the feasibility was verified by conducting an experiment.

• Journal of Hydrogen and New Energy
• /
• v.34 no.2
• /
• pp.91-99
• /
• 2023

Participation in power trading using surplus power is considered a business model active in the domestic energy trade market, but it is limited only if the legal requirements according to the type, capacity, and use of the facilities to be applied for are satisfied. The hydrogen residential demonstration model presented in this paper includes solar power, energy storage system (ESS), fuel cell, and water electrolysis facilities in electrical facilities for private use with low-voltage power receiving system. The concept of operations strategy for this model focuses on securing the energy self-sufficiency ratio of the entire system, securing economic feasibility through the optimal operation module installed in the energy management system (EMS), and securing the stability of the internal power balancing issue during the stand-alone mode. An electric facility configuration method of a hydrogen residential complex demonstrated to achieve this operational goal has a structure in which individual energy sources are electrically connected to the main bus, and ESS is also directly connected to the main bus instead of a renewable connection type to perform charging/discharging operation for energy balancing management in the complex. If surplus power exists after scheduling, participation in power trading through reverse transmission parallel operation can be considered to solve the energy balancing problem and ensure profitability. Consequentially, this paper reviews the legal regulations on participation in electric power trading using surplus power from hydrogen residential models that can produce and consume power, gas, and thermal energy including hybrid distributed power sources, and suggests action plans.

• Analytical Science and Technology
• /
• v.20 no.1
• /
• pp.78-83
• /
• 2007

To perform proficiency test for determining anti-impotence drug-like compounds in food, interlaboratory test has been done. Targets were 6 such as sildenafil, tadalafil, vardenafil, homosildenafil, hydroxy-homosildenafil and pseudo-vardenafilI. Total 13 institutes were participated and all is in charging of food analysis. To do double blind test, the reference materials were made as 13 different ginseng drink samples and each sample had random 3 targets. By the official method for anti-impotence drug-like compounds in food code, sample was just diluted in water, extracted in organic solvents, determined by HPLC/UV and then confirmed by LC/MS. The analytical duration was 60 days after receiving sample. Ten out of 13 institutes were satisfied by evaluation of Z-score and RSZ according to the regulation for managing analytical quality assurance.

• The Journal of the Korea Contents Association
• /
• v.22 no.5
• /
• pp.305-318
• /
• 2022

We focused on the care effectiveness of the interactive AI robots. developed an AI toy robot called 'Agaya' to contribute to personalization with more human-centered care. First, by applying P-TTS technology, you can maximize intimacy by autonomously selecting the voice of the person you want to hear. Second, it is possible to heal in your own way with good memory storage and bring back memory function. Third, by having five senses of the role of eyes, nose, mouth, ears, and hands, seeking better personalised services. Fourth, it attempted to develop technologies such as warm temperature maintenance, aroma, sterilization and fine dust removal, convenient charging method. These skills will expand the effective use of interactive robots by elderly people and contribute to building a positive image of the elderly who can plan the remaining old age productively and independently

• Korean Journal of Materials Research
• /
• v.33 no.7
• /
• pp.302-308
• /
• 2023

The influence of specimen geometry and notch on the hydrogen embrittlement of an SA372 steel for pressure vessels was investigated in this study. A slow strain-rate tensile (SSRT) test after the electrochemical hydrogen charging method was conducted on four types of tensile specimens with different directions, shapes (plate, round), and notches. The plate-type specimen showed a significant decrease in hydrogen embrittlement resistance owing to its large surface-to-volume ratio, compared to the round-type specimen. It is well established that most of the hydrogen distributes over the specimen surface when it is electrochemically charged. For the round-type specimens, the notched specimen showed increased hydrogen susceptibility compared with the unnotched one. A notch causes stress concentration and thus generates lots of dislocations in the locally deformed regions during the SSRT test. The solute hydrogen weakens the interactions between these dislocations by promoting the shielding effect of stress fields, which is called hydrogen-enhanced localized plasticity mechanisms. These results provide crucial insights into the relationship between specimen geometry and hydrogen embrittlement resistance.

• Journal of Hydrogen and New Energy
• /
• v.34 no.5
• /
• pp.431-438
• /
• 2023

Recently, study on hydrogen is being conducted due to environmental pollution and fossil fuel depletion. High-pressure gas hydrogen commonly used is applied to vehicle and tube trailers. In particular, high-pressure hydrogen storage tank for vehicles must comply with the guidelines stipulated in SAE J2601. There is a charging temperature limitation condition for the safety of the storage tank material. In this study, numerical analysis method were verified based on previous studies and the nozzle angle was changed for thermal management to analyze the increase in forced convection effect and energy uniformity due to the promotion of circulation flow. The previously applied high-pressure hydrogen storage tank has a length/diameter ratio of about 2.4 and was analyzed by comparing the length/diameter ratio with 8. As a result, the circulation flow of hydrogen flowing into the high-pressure hydrogen storage tank is promoted at a nozzle angle of 30° than the straight nozzle and accordingly, the effect of suppressing temperature rise by energy uniformity and forced convection was confirmed.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.715-726
• /
• 2023

This study suggested that protective panels should be installed as sacrificial members as a safety design method for structures with potential explosions such as hydrogen charging stations to minimize direct damage to the structure and have resilience. To this end, the focus of the experiment is on quantitatively evaluating the impact of the structure when the protection panel is installed closely or spaced apart from the structure in a high-speed collision situation of the projectile. The experimental design used steel plates instead of concrete structural members mainly used in the past for excellent reproducibility, and the impact of structural members was compared and analyzed through deformation differences on the back of the steel plate. In addition, the impact of changes in the physical properties of the elastic body used as a separation material for the protective member and the difference in shock wave transmission time according to the protective member and the elastic body on the structural member was investigated.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.2
• /
• pp.291-298
• /
• 2024

Due to its high theoretical capacity, Silicon (Si) has shown great potential as an anode material for lithium-ion batteries (LIBs). However, the large volume change of Si during cycling leads to poor cycling stability and low Coulombic efficiency. In this study, we synthesized Si/Carbon C45:Graphene composites using a ball-milling method with a fixed Si content (20%) and investigated the influence of the C45/Gr ratio on the electrochemical performance of the composites. The results showed that carbon C45 networks can provide good conductivity, but tend to break at Si locations, resulting in poor conductivity. However, the addition of graphene helps to reconnect the broken C45 networks, improving the conductivity of the composite. Moreover, the C45 can also act as a protective coating around Si particles, reducing the volume expansion of Si during charging/discharging cycles. The Si/C45:Gr (70:10 wt%) composite exhibits improved electrochemical performance with high capacity (~1660 mAh g^-1 at 0.1 C) and cycling stability (~1370 mAh g^-1 after 100 cycles). This work highlights the effective role of carbon C45 and graphene in Si/C composites for enhancing the performance of Si-based anode materials for LIBs.

• Journal of Korean Academy of Nursing
• /
• v.8 no.1
• /
• pp.131-138
• /
• 1978

The change of society has brought about various health problems which have become to demand comprehensive health services not only for individuals but also for families and communities as the unit. To meet the societal needs W Hospital in a rural Korea established a Department of Community Health Nursing Services and provided nursing services to patients under a early discharge program. This study is to evaluate the community health nursing services carried out the department in general, and has following specific objectives : 1. To learn attitude of the consumers and the "referees" toward early discharge program. 2. To find out attitude toward home care and cure services. 3. To find out the consumers and the "Referees" attitude toward the 15 selected home cue and cure activities by public health nurse. 4. To investigate possibility of charging fee for the 15 selected home care and cure activities by public health nurse. Three different study population were chosen: namely the consumer, the "referee" I and II. Excluding families moved out and not able to be contacted, the total families (77) referred to the department during the study period of September 1974 - December 1975 are defined as the consumer. Thirty seven nurses among 81 nurses who have been working in W Hospital since the inception of the Community Health Nursing Service Program were randomly selected. Thirty two nurses were defined as the "referee"I, because 5 questionnaires were not able to be collected. Twenty four doctors out of 37 who have been working since the Community Health Nursing Service Program started, and who were able to contact were called as the "referee" II. Data collection method employed for the consumers was direct interviewing with preposed interview schedules, and for the "referees"questionnaire method was utilized. x$^2$test and 100-percentage were employed in analyzing the data. The study findings are follows: 1. Attitude toward early discharge: Above 85% of the consumers and the "referees" approved the early discharge: Above 85% of the consumers and the "referees" approved the early discharge program. 2. Attitude toward the home care and cure services: Above 75% of the consumers and the "referees" showed positive attitude toward the home care and cure services by public health nurses. 3. Attitude toward 15 selected home care and curative activities by public health nurses: On the average more than 50% of the consumers and the "referees" expressed an affirmative attitude to perform 15 selected home care and cure services by public health nurses. 4. Attitude toward charging fee for 15 selected home care and curative activities by public health nurses: Above 85% of the consumers thought that they would pay for the services. Only 12.8% of the consumers and 5% of the "referees" what to have the services for nothing. Based upon the findings of this study; That is, the home care and cure services to be given by public health nurse were positively responded by the consumers and the pro-fissionable, one can conclude that the services provided by the Department of Community Health Nursing Service of W Hospital have been well accepted, and that early discharge program of hospital is believed to be a means to lessen the expenses of patients from hospitalization and to promote recovery from illness. It is recommended that hospital centered cure services should be reconsidered and scrutinized to meet community health needs. NOTE : "referees" are nurses and doctors who refer the early discharged Patient to the Department of Community Health Nursing Service.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.4
• /
• pp.409-414
• /
• 2008

Porous carbon electrode for electrosorption was prepared by a wet phase inversion method. Carbon slurry that was a mixture of activated carbon powder(ACP) and PVdF solution was cast directly upon a graphite sheet by means of a casting knife. Porous carbon electrodes were fabricated by immersing the cast film in pure water as a non solvent. Physical and electrochemical properties of carbon electrodes prepared with various ACP contents(50.0, 75.0, 83.3, 87.5, 90.0 wt %). From the SEM images we can verify that the electrode was porous. The average pore sizes determined for the electrodes fabricated with various ACP contents ranged from 72.7 to 86.4 nm and the size decreased as the ACP content increased. The electrochemical properties were characterized by cyclic voltammetry(CV) method. All of the voltammograms showed typical behavior of an electric double layer charging/discharging on the carbon surface. The capacitance increased with the ACP content and the values ranged from 2.18 F/cm$^2$ for 50 wt% ACP to 4.77 F/cm$^2$ for 90 wt% ACP.