• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.491-493
• /
• 2011

In this paper, a 15kW grid-connected battery charging and discharging system was proposed. AC regenerative device which consisted of an inverter using IGBTs and LCL filter transferred surplus power to grid. Phase locked loop(PLL) was used to resolve three-phase unbalance. AC regeneration function is able to improve the rate of energy use and the cost savings of energy is expected.

• 한국산업융합학회 논문집
• /
• 제23권5호
• /
• pp.853-863
• /
• 2020

As the battery ages, the internal resistance of the battery increases, so the loss due to the internal resistance increases at the same charging current, causing the battery temperature to rise, which further accelerates battery aging. Therefore, it is necessary to optimize the charging conditions according to the aging of the battery or the current charge amount, and to accurately estimate this, estimation of the parameters of the equivalent circuit is most important. This paper proposes a new measurement technique that can measure the internal resistance of a battery by analyzing a specific high frequency voltage and current applied to the battery. In addition, in order to test the validity of the proposed measurement technique, the current charging amount was estimated based on the measured internal resistance, and the terminal voltage of the constant current charging mode was automatically set and operated. As a result, good results were obtained regardless of the battery voltage. If this equipment is installed in the charging device, it is believed that it will be of great help in the stability management of the aging reusable battery.

• ETRI Journal
• /
• 제35권6호
• /
• pp.1164-1167
• /
• 2013

We correlate the failure in miniature X-ray tubes with the field emission gate leakage current of gated carbon nanotube emitters. The miniature X-ray tube, even with a small gate leakage current, exhibits an induced voltage on the gate electrode by the anode bias voltage, resulting in a very unstable operation and finally a failure. The induced gate voltage is apparently caused by charging at the insulating spacer of the miniature X-ray tube through the gate leakage current of the field emission. The gate leakage current could be a criterion for the successful fabrication of miniature X-ray tubes.

• 전기학회논문지
• /
• 제61권6호
• /
• pp.821-826
• /
• 2012

The streaming electrification process of vegetable insulating oils occurring when the oils contacted with solid material in a high power transformer circulation system seems to cause electrical discharge incidents and may cause failures. We therefore measured the dielectric breakdown voltage tendency of vegetable insulating oils flowing on the surface of the charging device with various velocity and temperature. First, the relation between the velocity and breakdown voltage tendency of vegetable oils, can be explained by volume effect and v-t effect. Second, experimental results show that applied voltage have little effect on dielectric breakdown voltage, when vegetable insulating oils used for large power transformer.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.255-258
• /
• 2008

In this paper, the battery charging device using DMFC(Direct Methanol Fuel Cell) for electric bicycle is proposed. In the proposed system, phase-shift full-bridge converter is used as a battery charger by boosting the 12V DMFC output voltage up to 36V. By using the phase-shift technique, the ringing of the transformer is reduced and the efficiency of the converter can be improved. The operation modes of proposed phase-shift full-bridge converter is analyzed and verified by the simulation and the experimental results.

• Composites Research
• /
• 제29권4호
• /
• pp.179-185
• /
• 2016

A self-charging supercapacitor is constructed through simple integration of the energy storage and photo exited materials at the photo electrode. The large band gap of $NiO/Fe_3O_4$ heterostructure generates photo electron at the photo electrode and store the charges through redox mechanism at the counter electrode. Sulfanilic acid azocromotrop/reduced graphene oxide layer at the photo electrode trapped the photo generated hole and store the charge by forming double layer. The solar supercapacitor device is charged within 400 s up to 0.5 V and exhibited a high specific capacitance of ~908 F/g against 1.5 A/g load. The solar illuminated supercapacitor shows a high energy and power density of 33.4 Wh/kg and 385 W/kg along with a very low relaxation time of ~15 ms ensuring the utility of the self charging device in the various field of energy storage and optoelectronic application.

• 에너지공학
• /
• 제12권4호
• /
• pp.253-258
• /
• 2003

냉동기 냉매 충전에는 수동용 매니폴드게이지가 이용되고 있으며 냉매 충전시에는 3가지 호스를 여러번 교체하게 되는데 이에 따라 냉매손실이 수반되고 냉매가 대기중에 방출된다. 본 연구에서는 자동 냉매 충전장치를 개발하고 장치내의 불응축 가스 및 압축기 오일에 미치는 영향을 정량적으로 평가하는 것을 목적으로 한다. 자동 냉매 충전장치는 단 한번의 호스장착과 선택스위치의 조작만으로 전자밸브 및 진공펌프가 자동개폐 및 작동되어 내압시험, 진공시험, 냉매 충전작업이 가능하게 되며 진공펌프를 분리해서 보관하지 않아도 되므로 조작이 매우 간편하다. 진공펌프 흡입 및 토출측 관로에 종래와 같이 호스내의 불응축 가스 제거의 필요성을 배제하여 냉매 손실과 대기오염을 방지하고 냉매 충전시에 종래와 같이 충전호스를 여러번 교체 할 필요가 없으므로 확실한 충전이 가능케 된다. 실험결과 수동 매니폴드게이지를 사용할 때에 비해 실리카겔(SiO$_2$)및 압축기 오일중의 수분량은 1/4 이하로 줄어 오일의 수명과 진공펌프의 수명을 연장할 수 있음을 밝혀내었다.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.306-309
• /
• 2019

Wireless charging is a technology of transmitting power through an air gap to an electrical load for the purpose of energy dissemination. Compared to traditional charging with code, wireless power charging has many benefits of avoiding the hassle from connecting cables, rendering the design and fabrication of much smaller devices without the attachment of batteries, providing flexibility for devices, and enhancing energy efficiency, etc. A transmitting coil and a receiving coil for inductive coupling or magnetic resonant coupling methods are available for the near field techniques, but are not for the far field one. In this paper, the wireless power transfer (WPT) circuit by using magnetic resonant coupling method with a resonant frequency of 13.45 Mhz for the low power system is implemented to measure the power transmission efficiency in terms of mutual distance and omnidirectional angles of receiver.

• 화약ㆍ발파
• /
• 제36권2호
• /
• pp.10-18
• /
• 2018

철골 구조물의 발파해체에 사용하는 성형폭약은 국내외 대부분의 경우에 사용이 제한적이거나 수급이 불가능하여 적용하지 못하는 경우가 많이 발생한다. 이러한 문제를 해결하기 위해서는 산업용 폭약을 사용하여 금속 제트가 발생할 수 있는 장치가 필요하다. 본 연구에서는 금속 제트가 발생하는 강재 절단용 장약용기를 제작하였다. 절단 성능 실험을 통해 두께 25mm의 강판에 대한 장약용기의 절단 성능을 평가하였다. 또한 침투 과정 수치 모사와 절단 성능 실험에서의 결과를 비교하고, 두께 35mm와 70mm의 강판에 대한 절단 성능을 평가하였다.

• 화약ㆍ발파
• /
• 제38권2호
• /
• pp.13-21
• /
• 2020

철골 구조물의 발파해체에 사용하는 성형폭약은 국내외 사용이 제한적이거나 수급이 불가능한 경우가 많이 발생하며, 기존의 선형 성형폭약은 규모가 크고, 강재의 두께가 두꺼운 철골 구조물을 절단하기 위한 충분한 절단 성능을 확보하지 못하였다. 이러한 문제를 해결하기 위해 고폭속, 고압력의 산업용 폭약을 사용하여 금속제트를 발생시켜 절단 할 수 있는 장치가 필요하다. 본 연구에서는 철골 구조물의 발파해체에 적용하기 위해 3가지 타입의 장약용기를 제작하였다. 절단 성능 실험을 통해 다양한 두께의 H형 강재와 강판에 대한 절단 성능을 평가하였고, 실험결과 충분한 절단성능을 확인하였다.