Explosives and Blasting (화약ㆍ발파)

Korean Society of Explosives and Blasting Engineering (대한화약발파공학회)
권호 표지

Development of Charging Container for Cutting Steel Plate and Evaluation of its Cutting Performance

강재 절단을 위한 장약용기의 개발과 절단 성능 평가

  • Received : 2018.06.12
  • Accepted : 2018.06.22
  • Published : 2018.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The shaped charge is used in explosive demolition of steel frame structure, but it was often not used because it was limited to use or impossible to supply at domestic and foreign. To solve this problem, we needed a device that could generate matal jets using industrial explosive. In this study, we made a charging container, which metal jets were generated when explosives were detonated. Cutting performance tests were carried out to evaluate the effect of cutting of a charging container on a steel plate of 25mm thickness. In addition, we compared the results between the numerical simulation of penetration process and cutting performance tests and then was evaluated a cutting performance for steel plates of 35mm and 70mm thickness.

철골 구조물의 발파해체에 사용하는 성형폭약은 국내외 대부분의 경우에 사용이 제한적이거나 수급이 불가능하여 적용하지 못하는 경우가 많이 발생한다. 이러한 문제를 해결하기 위해서는 산업용 폭약을 사용하여 금속 제트가 발생할 수 있는 장치가 필요하다. 본 연구에서는 금속 제트가 발생하는 강재 절단용 장약용기를 제작하였다. 절단 성능 실험을 통해 두께 25mm의 강판에 대한 장약용기의 절단 성능을 평가하였다. 또한 침투 과정 수치 모사와 절단 성능 실험에서의 결과를 비교하고, 두께 35mm와 70mm의 강판에 대한 절단 성능을 평가하였다.

Keywords

References

  1. 박훈, 석철기, 노유송, 2018, 강재 절단용 장약용기를 이용한 철골 교량 발파해체 시공사례, 화약.발파(대한화약발파공학회지), Vol. 36, No. 1, pp. 20-32.
  2. Johnson, G.R. and W.H. Cook, 1985, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Engineering fracture mechanics, Vol. 21, No. 1, pp. 31-48. https://doi.org/10.1016/0013-7944(85)90052-9
  3. Lee, E.L., H.C. Horning and J.W. Kury, 1968, Adiabatic expansion of high explosives detonation products(TID 4500-UCRL 50422), Lawrence Livermore National Laboratory, University of California, Livermore.
  4. Lim, S., 2012, Steady state equation of motion of a linear shaped charges liner, International Journal of Impact Engineering, Vol. 44, pp. 10-16. https://doi.org/10.1016/j.ijimpeng.2011.12.003
  5. Vjecislav, B., M. Dobrilovic and V. Skrlec, 2014, THE EFFICIENCY OF LINEAR SHAPED CHARGES, Tehnicki vjesnik, Vol. 21, No. 3, pp. 525-531.