• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.406-417
• /
• 2012

In this study, eco-friendly hybrid composite boards were manufactured from green tea, three kinds of charcoals and wood fiber for developing interior materials to reinforce the functionalities such as the deodorization and the absorbability on the green tea-wood fiber hybrid boards in the previous researches. The effects of kind of raw materials and the component ratio of raw materials on dimensional stability, deodorization and emission of formaldehyde were investigated. Thickness swelling of the hybrid composite boards increased with increasing of component ratio of green tea and charcoals, but the values were markedly lower than that of Korean standard (KS) for commercial medium density fiber board (MDF), except for hybrid composite boards composed of greed tea, activated charcoal and wood fiber. Reduction rate of ammonia gas for the hybrid composite boards composed of green tea, activated charcoal and wood fiber showed a high value of 96% after 30 minute from the beginning of the test, and the other hybrid boards also showed a high value of about 95% after one hour. Emission amount of formaldehyde was similar to that of $E_0$ grade in case of using $E_1$ grade urea resin, and was similar to that of super $E_0$ grade in case of using $E_0$ grade urea resin.

• Journal of the Korean Society of Food Culture
• /
• v.28 no.1
• /
• pp.78-88
• /
• 2013

Marinated beef galbi is a traditional Korean dish cooked with soy sauce, pear juice, onion, sesame oil, and sugar. However, there are many differences in beef galbi, including flavor and physicochemical aspects, depending on cooking conditions. Therefore, the physicochemical characteristics of marinated beef galbi prepared through various recipes was evaluated for its effects on pH, texture, aging, proteolysis, heating conditions, cooking time, and flavor compounds (pyrazines, IMPs, or FAAs). There were significant differences in salt concentration (0.8~3.03%), pH (4.89~6.22), and solid soluble contents (1.34-6.31 Brix) between recipes in this study. In the Pearson assay for sensory evaluation, overall preference correlated well with texture (a well-known sensory attribute in meat evaluation). Controlling the pH of meat through soaking in lemon solution, alkali water, phosphate, and baking powder solution, improved water holding capacity as much as 9 to 15% compared with the control. The myofibril index (MFI) of marinated meat stored at $4^{\circ}C$ increased 32% with 24 hours of aging and reached 39% at 48 hours of aging, and its fragmentation was observed through microscopy. SDS-PAGE showed hydrolysis of acid-soluble collagen by the pear juice, possibly related to meat tenderness. On the basis of surface temperature, the cooking time was estimated to be 8 minutes with pan heating at $170^{\circ}C$, 6 minutes at $270{\sim}300^{\circ}C$, and 4 minutes with charcoal at $700{\sim}900^{\circ}C$. Different pyrazine compounds, such as 2-methyl-3-phenylpyrrol(2,3-b) pyrazine (the typical product of the browning reaction) was mainly detected, and IMP (one of the main taste compounds in beef) was in higher amounts with the charcoal treatment, potentially related to its flavor preference among treatments. Our results demonstrate an effective case study and cooking system for beef galbi.

• Korean Journal of Organic Agriculture
• /
• v.20 no.3
• /
• pp.297-311
• /
• 2012

Since 1997, Korean Ministry of Knowledge Economy and Ministry of Environment have established data on some 400 basic raw and subsidiary materials and process like energy, petro-chemical, steel, cement, glass, paper, construction materials, transportation, recycling and disposal etc by initiating establishment of LCI database. Regarding agriculture, Rural Development Administration has conducted establishment of LCI database for major farm products like rice, barley, beans, cabbage and radish etc from 2009, and released that they would establish LCI database for 50 items until 2020 later on. The domestic LCI database for seeds, seedling, agrochemical, inorganic fertilizer and organic fertilizer etc is only at initial stage of establishment, so overseas LCI databases are brought and being used. However, since the domestic and overseas natural environments differ, they fall behind in reliability. Therefore, this study has the purpose to select organic farming materials, survey the production process for various types of organic farming materials and establish LCI database for the effects of greenhouse gas emitted during the process in order to select carbon basic units for agricultural production system compliant in domestic situation instead of relying on overseas data and apply life cycle assessment of greenhouse gas emitted by each crop during the process. As for selecting methods, in this study organic farming materials were selected in the method of direct observation of material and bottom-up method a survey method with focus on the organic farming materials admitted into rice production. For the basic unit of carbon emission amount by the production of 1kg of organic farming material, the software PASS 4.1.1 developed by Korea Accreditation Board under Ministry of Knowledge Economy was used. The study had the goal to ultimately provide basic unit to calculate carbon emission amount in executing many institutions like goal management system and carbon performance display system etc in agricultural sector to be conducted later on. As a result, emission basic units per 1kg of production were calculated to be 0.0088kg-$CO_2$ for charcoal, 0.1319kg-$CO_2$ for grass liquid, and 0.2804kg-$CO_2$ for microbial agent.

• Journal of Life Science
• /
• v.26 no.9
• /
• pp.1049-1055
• /
• 2016

This study aimed to investigate an effective method of purifying oil from hydrolysates of mackerel by-products. A hydrolyzed sample was separated into lipids and other material. After degumming of crude lipids with 6% citric acid solution, the phosphorous content (45 mg/kg) decreased to 5.8 mg/kg, and the acid value (18.03 mg /g) decreased to 1.19 mg KOH/g. Following the addition of 8% sodium hydroxide solution, the peroxide value (30.25 meq/kg) dropped to 3.18 meq/kg, and the chromaticity decreased from 0.488 nm to 0.057 nm. Bleaching was performed by adding 5% activated charcoal for 60℃ for 20 min under vacuum conditions. After bleaching, the acid value was 0.17 mg KOH/g, and the peroxide value was 1.21 meq/kg, but the chromaticity was not changed remarkably (0.062 nm). Crystallization was conducted to increase the amount of unsaturated fatty acids. After crystallization, the total amount of docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) was 228.83 mg/g. The results suggest that the product can be used as an omega-3 fatty acid resource for functional food.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.2
• /
• pp.103-107
• /
• 1999

The effects of MS salt strength, sucrose, and cultural conditions on bulblet formation and growth were investigated to optimize the conditions for micropropagating bulblets from in vitro bulb scales of Lilium Oriental Hybrid 'Casa Blanca'. There was no difference on bulblet formation in the range of 1/2~2 $\times$ strength of MS salt, but it was inhibited remarkably in 3 $\times$ strength of MS salt. The growth of regenerated bulblets was most stimulated on MS basal medium. Favorable bulblet formation and its growth from bulb scales were achieved when grown on the media with 1 : 2 or 1 : 3 in the ratio of NH$_4$^+ : NO$_3$^- , as well as on MS basal medium (NH$_4$^+ : NO$_3$^- = about l : 2). Therefore, MS basal medium was very suitable for bulblet formation and growth from bulb scales. Bulblet formation was inhibited but its growth was stimulated with increase sucrose concentration in the medium. The growth of regenerated bulblets was very effective on the media with 9~12% sucrose. Addition of activated charcoal (AC) to the medium inhibited bulblet formation from bulb scales, but enhanced the growth of regenerated bulblets. Especially, the medium containing 1 g/L AC was most effective on the growth of bulblets. No difference was found on bulblet formation and growth from bulb scales under light and dark conditions. In vitro micropropagation of L. Oriental Hybrid 'Casa Blanca' was supposed very reasonable to enhance the growth of the bulblets after forming of bulblets from in vitro bulb scales, and then, subculture the bulb scales from the grown bulblets on MS medium with 9% sucrose and 1 g/L AC.

• Journal of Plant Biotechnology
• /
• v.32 no.2
• /
• pp.123-128
• /
• 2005

A series of experiments were performed to establish regeneration system through friable embryogenic callus (FFC) of Lilium longiflorum 'Nellie White'. Only hard and regular callus was induced from bulb scales on medium containing 2.0 mg/L dicamba and $30{\sim}90$ g/L sucrose. The induced hard callus was subcultured on medium with 2.0 mg/L dicamba and 30 g/L sucrose, and used as a material for induction of FEC. In order to induce FEC, induced hard and regular callus was chopped into $1{\sim}2\;mm$ segments, and re-cultured on medium with 2.0 mg/L dicamba and 90 g/L sucrose. FEC was induced from chopped hard calli by the subcultures of two months interval. The induction rate of FEC was enhanced when hard callus was subcultured on same medium. FEC was proliferated more than 5 times on medium with $1.0{\sim}2.0\;mg/L$ dicamba and 90 g/L sucrose. Bulblet differentiation from FEC was very favorable on MS medium supplemented with 0.1 mg/L BA, 1.0 mg/L NAA and 30 g/L maltose, but many differentiated bulblets were changed to vitrificated ones. The differentiation of normal bulblets was most effective on medium containing $0.5{\sim}1.0\%$ activated charcoal and 30 g/L sucrose.

• Journal of Life Science
• /
• v.17 no.11
• /
• pp.1555-1561
• /
• 2007

In order to know the effects of scoria, germanium, charcoal, ginger, stevia, and CLA(Conjugated Linoleic Acid) as biologically active materials on pathogenic microbes and rumen anaerobic microbes, the growth rate of pathogens (including Escherichia coli O157, Salmonella paratyphi, Listeria monocytogenes and Staphylococcus aureus) and in vitro lumen microbial growth, gas production, ammonia concentration, carboxymethyl-cellulase (CMCase) activity, and microbial populations were investigated. The growth of pathogenic microbes was inhibited by the supplement of 0.10% ginger. Ginger had powerful antimicrobial properties on all the pathogens used in this experiments. Additionally in the antibacterial assay by paper disc method, we could observe the clear zone of similar area with the positive control(antibiotics) for E. coli as applied with the 10% stevia or the 10% CLA only. The supplements of ginger, stevia and CLA in vitro rumen fermentation inhibited populations of rumen bacteria and protozoa. Particularly supplement of ginger resulted in remarkable reduction of the protozoa population, which means it might serve as a source inhibiting material of methane creation in the rumen.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.187-201
• /
• 1996

This study was to evaluate the efficiency of diffusive monitor using activated carbon fiber(ACF, KF-1500) in measuring airborne organic solvents. The following characteristics were identified and studied as critical to the performance of diffusive monitor; recovery, sampling rate, face velocity, reverse diffusion and storage stability. For the evaluation of the performance of this monitor, MIBK, PCE, toluene were used as organic solvents. In the sampling rate experiments, eight kinds of solvents (n-hexane, MEK, DIBK, MCF, TCE, CB, xylene, cumene) as well as the above solvents were used. The results were as follows: 1. The desorption efficiencies(DE's) of ACF diffusive monitor ranged from 83 % to 101 %. In contrast, those of coconut shell charcoal ranged from 78 % to 102 %. Especially, the DE's of ACF for the polar solvents such as MEK were superior to those of charcoal. 2. Experimental sampling rates on ACF were average 42ml/min(37-46ml/min) for 11 organic solvents at $24{\pm}2^{\circ}C$, $50{\pm}5%RH$. However ideal sampling rates(DA/L) were 33 % higher than experimental sampling rates. 3. The initial response(15~16 min) of the testing monitor was 2 times higher than the actual concentration determined by the reference methods at $24{\pm}2^{\circ}C$, $8{\pm}5%RH$ and $80{\pm}5%RH$. Within 1 hours, the curve reached a linear horizontal line at low humidity condition. But sampling efficiencies decreased with respect to time at high humidity condition. And sampling efficiencies were higher at high humidity condition than low humidity condition for MIBK. 4. At very low velocity (less than 0.02 m/sec), the concentration of ACF diffusive monitor were poorly estimated. But ACF diffusive monitor were not affected at higher velocity(0.2 m/sec-0.6 m/sec). 5. There was no significant reverse diffusion when the ACF monitors were exposed to clean air for 2 hours after being exposed for 2 hours at the level of 1 TLV. 6. There was no significant sample loss during 3 weeks of storage at room temperature and 5 weeks of storage at refrigeration.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.241-248
• /
• 2001

The main factors of breakthrough are known to sampling time, flow rate, concentration of the sample, temperature, humidity, and the physical characteristics of the solid sorbent tube. However, no study has been reported the effect of temperature and sampling volume on the breakthrough of acharcoal tube during vinyl chloride monomer (VCM) sampling. The objective of this study is to suggest the optimal sampling condition during VCM sampling based on National Institute for Occupational Safety and Health (NIOSH) method. To evaluate adequate sampling volume for VCM without breakthrough, volume of 1, 2, 3, 4, and 5 L each from VCM of 1, 5, 10, 15, and 20ppm at flow rate of 0.05 L/min were sampled in $22^{\circ}C$ and $40^{\circ}C$. At $22^{\circ}C$, in the case of 1, 5, 10, and 15ppm, VCM was adsorbed completely in first section of charcoal tube regardless of sampling volume. But in 20ppm, detection rates are 99.56% in first section and 0.44% in second section. At $40^{\circ}C$ of 1ppm, VCM was adsorbed completely in first section. In 10, 15, and 20ppm, detection rates of second, third, and forth sections were decreased significantly by reduction of sampling volume. In determination of breakthrough based on NIOSH method, no breakthrough was occurred in 20ppm at $22^{\circ}C$. At $40^{\circ}C$, breakthrough was occurred in 10, 15, and 20ppm when sampling volume was 5L. Although no breakthrough was occurred when sampling volume was 3L. Finally, in environment of temperature around $22^{\circ}C$, breakthrough may not occurred up to 20ppm during sampling for VCM. During sampling for VCM in environment of temperature around $40^{\circ}C$, no breakthrough occurred in 1-5ppm and 10-20ppm when sampling volume is 5L and 3L respectively. This result suggests that the sampling volume should be considered when VCM sampling under hot conditions (> $22^{\circ}C$) by the NIOSH method No. 1007.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.10-18
• /
• 2001

Experiments were conducted to compare ozone sensitivity among clones. Ten clones of Papulus deltoides Marsh. were exposured in walk-in type chambers to charcoal-filtered air, 50ppb, 100ppb, and 150ppb ozone for 8h $day^{-1}$ for 21 consecutive days. Occurrence of premature leaf-fall, and visible foliar injury expressed as adaxial stipple were measured after termination of ozone exposure for 3 weeks. Rate of premature leaf-fall increased progressively according to ozone exposure levels. As a result, rate of premature leaf-fall was estimated over 50% at 150ppb ozone. In the charcoal-filtered air and 50ppb ozone treatments, visible foliar injury was not found. But injury was estimated as LA; 17.3%, AA; 6.5%, and LAA; 1.6% to 100ppb ozone treatment and LA; 34.1%, AA; 17.5%, and LAA; 7.4% to 150ppb ozone treatment. Clonal differences of sensitivity within the species were manifested by significant clone differences of adaxial stipple(LAA) in 100ppb and 150ppb ozone treatments.