• Journal of The Korean Society of Clinical Toxicology
• /
• v.1 no.1
• /
• pp.6-11
• /
• 2003

Various forms of dialytic techniques are available for detoxification. Hemodialysis, hemoperfusion and hemofiltration (hemodialfiltration) are the main treatment modalities. Because these modalities are rather invasive and expensive, it must be decided in balance of the risk and benefit to the patient. The prime consideration in the decision is based on the clinical features of poisoning; hemodialysis or hemoperfusion should be considered in general if the patient's condition progressively deteriorates despite intensive supportive therapy. The hemodialysis technique relies on passage of the toxic agent through a semipermeable membrane so that it can equilibrate with the dialysate and subsequently removed. It needs a blood pump to pass blood next to a dialysis membrane, which allows agents permeable to the membrane to pass through and reach equilibrium. Solute (or drug) removal by dialysis has numerous determinants such as solute size, its lipid solubility, the degree to which it is protein bound, its volume of distribution etc. The technique of hemoperfusion is similar to hemodialysis except there is no dialysis membrane or dialysate involved in the procedure. The patient's blood is pumped through a perfusion cartridge, where it is in direct contact with adsorptive material (usually activated charcoal) that has a coating material such as cellulose. This method can be used successfully with lipid-soluble compounds and with higher-molecular-weight compounds than for hemodialysis. Protein binding does not significantly interfere with removal by hemoperfusion. In conclusion, hemodialysis, hemoperfusion and hemofiltration can be used effectively as adjuncts to the management of severely intoxicated patients.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.357-366
• /
• 2003

This study was conducted to develop n convenient and efficient granular type absorbent with high CEC from powdery zeolite, which is a waste produced while crushing the natural zeolite of Korea to get a particular particle size. The change of mineralogical characteristics during hydrothermal alternation of natural zeolite to Na-P zeolite in alkaline solution at various reaction times was determined by X-ray diffraction (XRD), scanning electron microscopy (SEM), and total elemental analysis. The columnar aggregate of Na-P Zeolite was produced by calcinating the natural zeolite-charcoal extrudates of about 3 mm diameter. In 24 hours reaction, clinoptillonite, mordenite and feldspar in natural zeolite were disappeared by 3 N NaOH treatment, while Na-P Zeolite with spherical granular structure was newly detected by XRD. As increasing reaction time, Si/Al ratio in remaining solution was deceased. The CEC of the synthesized material increased more than 2 times compared with that of natural zeolite, although the diameter of Na-P zeolite were rather increased.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.5 no.2
• /
• pp.106-111
• /
• 2007

Purpose: Inadequate hospital stocking and unavailability of essential antidotes is a worldwide problem. The purpose of this study was to determine the adequacy of antidote stocks in Korean hospitals based on a modified version of US antidote stocking guidelines. Methods: Both written and telephone surveys to collect information on hospital demographics and antidote stocking were given to the emergency departments or hospital pharmacies of 117 hospitals with emergency medical centers. The twenty antidotes included in the survey were taken from year 2000 US antidote stocking guidelines, except for activated charcoal and black widow spider antivenin. Antidote stocks were compared by hospital size, geographic location, and type of emergency medical center. Results: Complete responses were received from all hospitals. A mean of $12.4{\pm}2.9$ antidotes were adequately stocked per hospital. All hospitals stocked atropine, $CaCl_2$ naloxone, and sodium bicarbonate. However, digoxin Fab fragment (16%), cyanide kits (15%), EDTA (10%), BAL (9%), and fomepizole (1%) were not uniformly stocked. Large and teaching hospitals were significantly more likely to stock greater numbers of antidotes. Conclusions: Korean hospitals as a group do not have adequate antidote stocks. Korean stocking guidelines and an antidote management system are recommended in order to correct these deficiencies.

• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.500-509
• /
• 2009

Passive samplers have been used for many years for the sampling of organic vapors in work environment atmospheres. Currently, all passive samplers used in domestic occupational monitoring are foreign products. This study was performed to evaluate variable parameters for the development of passive organic samplers, which include the geometry of the device and diffusive length for the sampler design. Four prototype diffusive lengths; A-1(4.5 mm), A-2(7.0 mm), A-3(9.5 mm), A-4(12.0 mm) were tested for adsorption performances to a chemical mixture (benzene, toluene, trichloroethylene, and n-hexane) according to the US-OSHA's evaluation protocol. A dynamic vapor exposure chamber developed and verified by related research was used for this study. The results of study are as follows. The results in terms of sampling rate and recommended sampling time test indicate that the most suitable model was A-3 (9.5 mm diffusive lengths on both sides) for passive sampler design in time weighted average (TWA) assessment. Sampling rates of this A-3 model were 45.8, 41.5, 41.4, and 40.3 ml/min for benzene, toluene, trichloroethylene, and n-hexane, respectively. The A-3 models were tested on reverse diffusion and conditions of low humidity air (35% RH) and low concentrations (0.2 times of TLV). These conditions had no affect on the diffusion capacity of samplers. In conclusion, the most suitable design parameters of passive sampler are: 1) Geometry and structure - 25 mm diameter and 490 $mm^2$ cross sectional area of diffusion face with cylindrical form of two-sided opposite diffusion direction; 2) Diffusive length - 9.5 mm in both faces; 3) Amount of adsorbent - 300 mg of coconut shell charcoal; 4) Wind screen - using nylon net filters (11 ${\mu}m$ pore size).

• Korean Journal of Materials Research
• /
• v.12 no.1
• /
• pp.48-53
• /
• 2002

$Al_2O_3-SiC$ and $Al_2O_3-SiC$-TiC composite powders were prepared by SHS process using $SiO_2,\;TiO_2$, Al and C as raw materials. Aluminum powder was used as reducing agent of $SiO_2,\;TiO_2$ and activated charcoal was used as carbon source. In the preparations of $Al_2O_3-SiC$, the effect of the molar ratio in raw materials, compaction pressure, preheating temperature and atmosphere were investigated. The most important variable affecting the synthesis of $Al_2O_3-SiC$ was the molar ratio of carbon. Unreactants remained in the product among all conditions without compaction. The optimum condition in this reaction was $SiO_2$: Al: C=3: 5: 5.5, 80MPa compaction pressure under Preheating of $400^{\circ}C$ with Ar atmosphere. However there remains cabon in the optimum condition. The effect of $TiO_2$ as additive was investigated in the preparations of $Al_2O_3-SiC$. As a result of $TiO_2$ addition, $Al_2O_3-SiC$-TiC composite powder was prepared. The $Al_2O_3$ powder showed an angular type with 8 to $15{\mu}m$, and the particle size of SiC powder were 5~$10{\mu}m$ and TiC powder were 2 to $5{\mu}m$.

• Journal of Plant Biotechnology
• /
• v.34 no.3
• /
• pp.229-235
• /
• 2007

Artificial seeds were produced by encapsulation of somatic embryos of Kalopanax septemlobus and investigated the effects of alginic acid concentration, size of somatic embryos, additives in capsules and nursery seedbeds for germination. The most suitable concentration of alginic acid was 3% for germination of encapsulated seeds. Germination was suppressed at higher concentration more than 3% alginic acid. For germination of artificial seeds, 1/2 MS medium with 0.02% activated charcoal was effective. There was no significant differences on the germination among the different size of somatic embryos. Additives in hydrated capsule was very important for germination and post-germinative growth of artificial seeds. Germination was severly inhibited in hydrated capsule containing only distilled water. Both sucrose and MS medium addition in hydrate capsule was effective for germination of artificial seeds. When artificial seeds were transferred to soilbed, germination rate was high in perlite containing 3% sucrose but very low in perlite with only water. These results indicate that nursery additives in both hydrate capsules and soilbeds was important for germination of artificial seeds in Kalopanax septemlobus.

• Resources Recycling
• /
• v.11 no.1
• /
• pp.3-8
• /
• 2002

In order to make the high purity Mn$_3$O$_4$powder for the raw material of soft ferrite, Mn is extracted from the dust and the extracted solution is refined. The dust is generated in producing a medium-low carbon ferromanganese and contains 90% Mn$_3$O$_4$. Mn$_3$O$_4$in the dust was reduced into MnO by roasting with charcoal. Injection of the 180g/L of the reduced dust into 4N HCI solution increased pH of the leaching solution higher than 5 and then a ferric hydroxide was precipitated. Because the ferric hydroxide co-precipitates with Si ion etc, Fe and Si ion was removed from the solution and the about 10% Mn solution was obtained. The solution was diluted with water to Mn-15000 ppm and $NH_4$F was injected into the diluted solution at $70^{\circ}C$ to the F-3000 ppm. As a result, Ca ion is precipitated as $CaF_2$and the residual concentration of Ca was 14 ppm. Injection of the equivalent (NH$1.5M_4$)$_2$$CO_3$solution as 2 L/min at $25^{\circ}C$ into the above solution precipitated a fine and high purity $MnCO_3$powder. The deposition was filtrated and roasted at $1000^{\circ}C$ for 2 hours. As a result, $MnCO_3$powder is converted into $Mn_3$$O_4$powder and it had $8.2\mu$m of median size. The final production is above 99% $Mn_3$$O_4$powder and it satisfied the requirement of high purity $Mn_3$$O_4$powder for a raw material of soft ferrite.

• Journal of Forest and Environmental Science
• /
• v.23 no.1
• /
• pp.11-19
• /
• 2007

This study was designed to analyze the economic efficiency that is needed to develop and make practical application of a mobile carbonization apparatus, which are able to make wood charcoals and pyroligneous liquid at the logging field with debris. B/C ratio was employed to make an economic analysis, and sensitivity analysis with respect to change in price and interest rates also was made. Cylindrical type is the proper type for the mobile carbonization apparatus, when important factors such as handling capacity, a carbonization time, quality of products and assembling ability were considered. It weighs 400 kg, and a three-step fold-up equipment. The size of 2 (diameter) by 2.4 m (height) carbonization equipment required 1,500 kg wood debris per batch. A forty-eight to fifty-two carbonization time produced 300 kg of wood charcoal and $45{\ell}$ of pyroligneous liquid. The average life span of the apparatus was 5 years. If the private enterprise operated 100 batch, 80 batch, and 70 batch with one apparatus, the B/C ratio of them was greater than 1, indicating that the production is economically feasible. The period to achieve a break-even point required to be 4 years in case of 100 and 80 batches to 5 years in case of 70 batch. But the private enterprises should operate at least two apparatus for the profits. Also, if the production was to be profitable, the prices of wood charcoals and pyroligneous liquid should be at least 750 won per kg and 700 won per liter.

• Research in Plant Disease
• /
• v.22 no.1
• /
• pp.50-54
• /
• 2016

In early June 2014, leaf spot symptoms were observed on black chokeberry (Aronia melanocarpa) in Yesan-gun and Geumsan-gun, Chungcheongnam-do in Korea. The initial symptoms on leave surfaces were brown small-circular spots with a yellow halo lesion, and gradually the small spots were fused, all of infected leaves dropped eventually. A fungus were isolated from the initial lesion, and cultured on potato dextrose agar. Colony color on upper surface of plate varied from olive gray to charcoal gray. Size of conidia mostly extend to $19-50{\times}5-9{\mu}m$ in nature and $20-59{\times}8-13{\mu}m$ in culture, with 3-8 transverse septa and usually no longitudinal septum or only 1 longitudinal septum in 1-3 of the transverse compartments, and also have a short or long beak. Pathogenicity was investigated using wounded or unwounded black chokeberry and apple leaves. After 7 days of inoculation, leaf spots were similar to the symptoms naturally occurred in the field. On the basis of mycological characteristics, pathogenicity, and ITS rDNA sequence analysis, this fungus was identified as Alternaria mali. This is the first report of Alternaria leaf spot on black chokeberry caused by A. mali in Korea.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.3
• /
• pp.185-190
• /
• 2010

This study was focused to make a wooden plate that is engraved with writings or pictures on the medium density fiberboard (MDF), and then to produce a calligraphy-carving artwork by carbonization of the carved MDF. The external appearances and anatomical changes were investigated on the carbonized MDF and aesthetic characteristics was also discussed. No split and no twist were found after the carbonization (at $850^{\circ}C$) of the calligraphy-encarved MDF, shrinkages of the MDF were observed with portions of 21.8% in length, 18.8% in width and 43.5% in thickness, and 69.2% of weight loss with density decrease of 14.8% were observed as well. From the observation of the carbonized board by a scanning electron microscope, specific phenomena were found: the adhesives, surrounding the fiber's surface and pits, were carbonized, the woody fibers were changed smoothly, the pits were opened, the fiber' size was uniformized, and the organization was compacted. By the combination of handmade calligraphy-woodcarving and crack-free carbonizing methods, it was able to find a new method for manufacture carbonized calligraphy-woodcarving artwork. It is concluded that the calligraphy-woodcarving artwork using carbonized board can be a new access for the eco-friendly art that has the advantage of the functionality of charcoal and the aesthetic of calligraphy-woodcarving simultaneously.