• Journal of Soil and Groundwater Environment
• /
• v.27 no.1
• /
• pp.39-49
• /
• 2022

Bottom ash generated from thermal power plants is mainly disposed in landfills, from which metals may be leached by infiltrating water. To evaluate the effect of metals in leachate on soil and groundwater, we characterized bottom ash generated from burning cokes, bituminous coal, the mixture of bituminous coal and wood pellets, and charcoal powder. The bottom ash of charcoal powder had a relatively large particle size, and its wood texture was well-preserved from SEM observation. The bottom ash of charcoal powder and wood pellets had relatively high K concentration from total element analysis. The eluates of the bottom ash samples had appreciable concentrations of Ca, Al, Fe, SO₄, and NO₃, but they were not a significant throughout the batch test. Therefore, it is considered that there is low possibility of soil and groundwater contamination due to leaching of metal ions and anions from these bottom ash in landfills. To estimate the trend of various trace elements, long-term monitoring and additional analysis need to be performed while considering the site conditions, because they readily adsorb on soil and aquifer substances.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.864-871
• /
• 2016

This study was conducted to compare and analyze gross calorific values from measurement methods of lignocellulosic biomass and calculation data from calorific value prediction models based on the elemental content. The deviation of Liriodendron tulipifera (LT) and Populus euramericana (PE) was shown 7.7 cal/g and 7.4 cal/g respectively in palletization method, which are within repeatability limit 28.8 cal/g of ISO FDIS 18125. In the case of Thailand charcoal (TC), nontreatment method and palletization method was satisfied with repeatability limit as 22.8 cal/g and 8.8 cal/g respectively. Seowon charcoal (SC) was shown deviation of 11.4 cal/g in nontreatment method, because the density and chemical affinity of sample increases as the carbon content increases from heat treatment at high temperature in the case of TC and SC. In addition, after applying the elemental content of each of these samples to the calorific value prediction models, the study found that Model Equation (3) was relatively consistent with measured calorific values of all these lignocellulosic biomass. Thus, study about the correlation between the density and size of particle should be conducted in order to select the measurement method for a wide range of solid biofuels in the future.

• Journal of the Korean Ceramic Society
• /
• v.47 no.4
• /
• pp.308-311
• /
• 2010

Porous SiC samples were prepared with three types of wood (poplar, pine, big cone pine) by simply embedding the wood charcoal in a powder mixture of Si and $SiO_2$ at 1600 and $1700^{\circ}C$. The basic engineering properties such as density, porosity, pore size and distribution, and strength were characterized. The samples showed full conversion to mostly $\beta$-SiC with good retention of the cellular structure of the original wood. More rigid SiC struts were developed for $1700^{\circ}C$. They showed similar bulk density ($0.5{\sim}0.6\;g/cm^3$) and porosity (81~84%) irrespective of the type of wood. The poplar sample showed three pore sizes (1, 8, $60\;{\mu}m$) with a main size of $60\;{\mu}m$. The pine sample showed a single pore size ($20\;{\mu}m$). The big cone pine sample showed two pore sizes (10, $80\;{\mu}m$) with a main size of $10\;{\mu}m$. The bend strength was 2.5 MPa for poplar, 5.7 MPa for pine, 2.8 MPa for big cone pine, indicating higher strength with pine.

• Journal of Plant Biotechnology
• /
• v.6 no.4
• /
• pp.241-246
• /
• 2004

The bulb scales and shoot sections ($7\;\cal{mm}\;\times\;15\;\cal{mm}$) of Lilium oriental hybrid 'Casablanca' were cultured to compare bulblet growth in vitro. Shoots were induced from in vitro grown bulbscales on MS medium with $1.0\;\cal{mg/L}\;BA,\;0.5\;\cal{mg/L}$ IAA, and 30 g/L sucrose. The regenerated shoots were cut into shoot sections, and cultured on MS medium with $2.0\;\cal{mg/L}\;BA,\;0.5\;\cal{mg/L}$ IAA and 30 g/L sucrose for shoot proliferation. Culture of shoot sections stimulated bulblet growth significantly than the bulb scales on MS medium with 60 g/L sucrose. However, the bulblets from shoot sections did not reach ideal size to produce stems with several leaves. Therefore, liquid medium was added into the same vessels to stimulate bulblet growth further. After shoot sections were cultured on MS medium with 60 g/L sucrose and 2 g/L activated charcoal for two months in dark, $20\;\cal{ml}$ liquid media containing various concentrations of sucrose and MS salts were added. Two months later, the added liquid medium stimulated bulblet growth remarkably as compared to bulblets grown without added liquid medium. The added $25\;\cal{ml}$ liquid medium containing 120 g/L sucrose and double strength of MS salts were the most effective for growth of in vitro bulblets. More than $94\%$ bulblets produced by this method sprouted stems with several leaves after cold treatment at $5^{\circ}C$ for three months.

• Journal of Environmental Health Sciences
• /
• v.35 no.4
• /
• pp.315-321
• /
• 2009

Under-fired charbroiling cooking processes are known as important contributors of particulate matter (PM). In this study, we characterized the emission of particulate matters from under-fired charbroiling cooking processes using the hood method. Accumulated mass concentration of $PM_{10}$ was 92.2~99.5% and particle size of 2.0~2.5 ${\mu}m$ was highest. The concentration of PM increased very sharply at the beginning of charbroiling meats and then gradually decreased as the charbroiling continued. PM concentration also increased very sharply when gravy from meat spilled onto the frame of fire. However, mass concentration during charbroiling using only charcoals was very low compared to that of meats. We estimated the emission factors of charcoal, pork belly and pork shoulder respectively; 0.01~0.02 g/kg, 5.02~6.26 g/kg, 2.86~4.15 g/kg of $PM_{2.5}$, 0.01~0.03 g/kg, 7.44~7.91 g/kg, 4.54~5.56 g/kg of $PM_{10}$, and 0.02~0.05 g/kg, 7.59~7.95 g/kg, 4.93~5.68 g/kg of TSP. The emission factors of charcoal were negligible and the emission factors of pork belly were higher than that of pork shoulder. Emission rates of particulate matters from under-fired charbroiling cooking process were estimated as 578,009~1,265,152 kg/yr of $PM_{2.5}$, 917,539~1,598,619 kg/yr of $PM_{10}$ and 996.358~1,606,703 kg/yr of TSP. But emission factors should be verified with an in-stack cascade impactor because the reported method involves some assumptions.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.52-57
• /
• 2008

In this study, the effects of carbonization temperature on the physico-chemical properties of porous wood charcoal are studied by FT-IR and Raman spectroscopies. IR studies showed that cellulose and hemicellulose are mostly decomposed in the precarbonization stage at $500^{\circ}C$, while the decomposition reaction of relatively more stable lignin lasts up to $700^{\circ}C$. Above $900^{\circ}C$, the peak at $1575cm^{-1}$ disappears and a new peak at $1630cm^{-1}$, which seems to be related to the new carbon deposit phase, is evolved. The results of Raman studies, which show the red-shift of D-band and the increase in the relative intensity of D- to G-band, indicate that the size of the crystalline becomes smaller with increasing the carbonization temperature.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.4
• /
• pp.344-354
• /
• 2014

Activated charcoal supported nickel molybdenum carbide (carburized Ni-Mo/AC) catalysts were prepared by wet-impregnation followed by temperature-programmed carburization using 20% $CH_4/H_2$ gas. The effects of pH and initial Ni/Mo mole ratio during wet-impregnation step on the characteristics of the carburized Ni-Mo/AC catalysts were investigated using ICP, XRD, XPS, BET and $CO_2$-TPD techniques, and correlated with the catalytic activity of the carburized Ni-Mo/AC in methane dry reforming reaction. Comparison of the results of methane dry reforming reaction kinetics with the results of characterization of the carburized Ni-Mo/AC catalyst showed that the catalytic activity in methane dry reforming reaction was higher at higher initial Ni/Mo mole ratio or at lower pH(3~natural value). This phenomenon was related to the crystal size of metallic Ni in the carburized Ni-Mo/AC catalyst.

• Journal of Yeungnam Medical Science
• /
• v.4 no.2
• /
• pp.59-64
• /
• 1987

Experiments were conducted to define the optimal constituents of culture medium and atmospheric condition for growth of Campylobacter pylori. Two clinical isolates were streaked onto various media, incubated in two different atmospheric conditions (microaerophilic condition and carbon dioxide incubator), and growth was assessed semiquantitavely according to relative colony size and extent of growth through the streak. The growth obtained on Campy media, composed of GC agar base plus 1% hemoglobin, 0.2% activated charcoal, 1% IsoVitaleX, vancomycin 6mg/L nalidixic acid 20mg/L and amphotercin 2mg/L, was used as reference. Our conclusions were as follows: Tryptic soy agar base was not acceptable for the growth of C. pylori. As a sole supplementation, GC agar containing 1% hemoglobin was relatively adequate for the growth of C. pylori. The organism grew in both atmospheric conditions, but generally showed a scantier growth in the carbon dioxide incubator than under the microaerophilic condition, however GC agar containing 1% hemoglobin and 0.2% activated charcoal supported well the growth of C. pylori in the carbon dioxide incubator. The authors have found that the GC agar base supplemented with 1 % hemoglobin and 0.2% charcoal was the most satisfactory medium and a microaerophilic condition was optimal atmospheric condition for the growth of Campylobacter pylori in this study.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.177-184
• /
• 2019

Mycobacteria grow slowly. Therefore, a solid medium should be used for eight weeks and a liquid medium for six weeks. The purpose of this study was to find the growth factors that can grow Mycobacterium rapidly and to help develop a solid medium for rapid identification. Three types of Mycobacterium growth factors were evaluated with 10 Mycobacteria by adding activated charcoal, defibrinated sheep blood, and L-ascorbic acid to $Difco^{TM}$ Mycobacteria 7H11 agar (Becton, Dickinson and Company, Sparks, MD, USA). The time to detection and the distinguishability of a colony were compared with that of the current method. In the rapidly growing Mycobacterium, the difference in detection time between the new media and conventional media confirmed that the new media was faster. M. kansasii and M. intracelluare grew faster in 7H11 C than in 7H11 medium. MTB grew faster than the other media in 7H11 C. This study confirmed that the two growth factors affect fast-growing Mycobacteria and slow-growing Mycobacteria. 7H11 C showed better distinguishability than the conventional media in all 10 Mycobacterium due to the color contrast. In particular, when the MTB was grown, the size of the colonies was larger than with other media, so visualization was easy.

• Korean Journal of Human Ecology
• /
• v.9 no.4
• /
• pp.41-53
• /
• 2006

The purpose of this study was to compare the characteristics of underwear consumer's underwear purchasing behavior through survey. 630 questionnaires were distributed in Seoul and Chonju and 618 with usable data were analyzed frequency and factor analyses, t-test etc. using SPSSWIN 10.0. program. The results were summarized as follows : Most male consumers buy underwears at discount stores whereas most female consumers at chain store. Throughout all four seasons, more male and female consumers do not wear heat-retaining underwears. Most male and female consumers do not have function-fiber underwears nor functional-finishing and natural-dyeing-treated underwears. Most consumers are not satisfied with these underwears. The most important criteria for most male consumers to choose underwears are comfort levels while in action, the sense of touch, comfort levels while wearing them while not in action, pleasance levels; whereas for females are comfort levels while in action, and comfort levels while wearing them while not in action. Male consumers prefer a little bigger-than-their-bodies size, dry and soft fabrics, plain white color; whereas female consumers prefer a little tight size, dry and soft fabrics and plain beige color, Most consumers want to buy functional-fiber underwears made of yellow- soil-and-charcoal-dyeing fabrics which has jade.