• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2101.1_2102.1
• /
• 2009

Solar energy is an extreme intermittent and inconstant energy source. This paper presents the analysis of photovoltaic I-V characteristics according to the module temperature. It shows that the result of the relationship between DC current and the module temperature of solar cell will be effects by the increasing irradiation.

• Journal of electromagnetic engineering and science
• /
• 제9권4호
• /
• pp.175-181
• /
• 2009

The measurements were performed to verify experimentally that the voltage arising on a telecommunication line by a power line is due to the induction phenomena because there has been an opinion that the arising voltage on a telecommunication line is not by induction, but by other causality. The voltage appeared on the telecommunication line by way of an electric field or magnetic field generated by the source apparatus that had been artificially made to provide intentional constant high-voltage or current in ELF, that is, 60 Hz as an emulated commercial power.

• 한국대기환경학회지
• /
• 제21권3호
• /
• pp.329-341
• /
• 2005

The purpose of this study is to study the $PM_{2.5}$ source characteristics affecting the Seoul area using a chemical mass balance (CMB) receptor model. This study was also to evaluate the $PM_{2.5}$ source profiles, which were directly measured and developed. Asian Dust Storm usually occurred in the spring, and very high $PM_{2.5}$ concentrations were observed in the fall among the sampling periods. So the ambient data collected in the spring and fall were evaluated. The CMB model results as well as the $PM_{2.5}$ source profiles were validated using the diagnostic categories, such as: source contribution estimate, t-statistic, R-square, Chi-square, and percent of total mass explained. In the spring months, the magnitude of $PM_{2.5}$ mass contributors was in the following order: Chinese aerosol $(31.7\%)>$ secondary aerosols ($22.3\%$: ammonium sulfate $13.4\%$ and ammonium nitrate $8.9\%)>$ vehicles ($16.1\%$: gasoline vehicle $1.4\%$ and diesel vehicles $14.7\%)>$biomass burning $(15.5\%)>$ geological material $(10.5\%)$. In the fall months, the general trend of the $PM_{2.5}$ mass contributors was the following: biomass burning $(31.1\%)>$ vehicles ($26.9\%$: gasoline vehicle $5.1\%$ and diesel vehicles $21.8\%)>$ secondary aerosols ($23.0\%$: ammonium sulfate $9.1\%$ and ammonium nitrate $13.9\%)>$ Chinese aerosol $(10.7\%)$. The results show that the $PM_{2.5}$ mass in the Seoul area was mainly affected by the Chinese area.

• ETRI Journal
• /
• 제31권5호
• /
• pp.604-606
• /
• 2009

The primary dose effects on an insulated gate bipolar transistor (IGBT) irradiated with a $^{60}Co$ gamma-ray source are found in both of the components of the threshold shifting due to oxide charge trapping in the MOS and the reduction of current gain in the bipolar transistor. In this letter, the IGBT macro-model incorporating irradiation is implemented, and the electrical characteristics are analyzed by SPICE simulation and experiments. In addition, the collector current characteristics as a function of gate emitter voltage, VGE, are compared with the model considering the radiation damage of different doses under positive biases.

• 대한전자공학회논문지
• /
• 제27권12호
• /
• pp.1865-1869
• /
• 1990

N-Channel polysilicon MOSFETs (W/L=20/1.5, 3, 5.10\ulcorner) were fabricated using RTP (Rapid Thermal Processor) and hydrogen passivation. The N+ source, drain and gate were annealed and recrystallized using RTP at temperature of 1000\ulcorner-1100\ulcorner. But the active areas were not specially crystallized before growing the gate oxide. Without the hydrogen passivarion, excellent transistor characteristics (ON/OFF=5.10**6, S=85MV/DEC, IL=51pA/\ulcorner) were obtained for 1.5\ulcorner MOSFET. Also the transistor characteristics were improved by hydrogen passivation.

• 한국인쇄학회지
• /
• 제26권1호
• /
• pp.97-111
• /
• 2008

BLU is a important part of the most representative LCD at flat panel display. In order to supplement the optical special quality which LCD cannot light itself, BLU is an essential property to supply with same brightness on the screen. In this study we have manufactured and characterized the low temperature calcined paste that can be used as a flat light source for LCD BLU. For the phosphor paste and intermediate paste, the low temperature calcined acryl resin was used as the binder. From the result of thermal decomposition measurement, residual carbonaceous materials was found to be less than 0.2wt% at $400^{\circ}C$.

• 한국통신학회논문지
• /
• 제29권11B
• /
• pp.930-937
• /
• 2004

이 논문에서는 시간에 따라 채널 상태가 변화는 무선 채널 상에서 Markov 소스의 딜레이 성능을 분석하였다. 무선 링크의 양단에서 Selective-repeat (SR) ARQ 프로토콜을 사용한다고 가정했다. 이 논문에서는 대기 시간과 전송 및 재전송 시간 그리고 재 정렬 시간으로 구성된 단대단 평균 패킷 딜레이에 대한 근사화된 분석 방식을 제안하였다. 수치적인 분석과 시뮬레이tus 결과와의 분석을 통해서, 이 연구에서 제안한 분석 방식이 대부분의 경우 정확한 결과를 예측하고 있음을 증명하였다.

• 한국환경과학회지
• /
• 제16권3호
• /
• pp.299-310
• /
• 2007

It will be necessary to make proper management plans to preserve the air quality in good level for the public. In order to make these plans, source information and detail emission inventories of the city and near industrial areas should be given. However, lack of the source measurements data makes us more difficult to complete the source inventory. VOC source Inventory could be utilized for the feasibility study to estimate the contribution of VOC sources presenting to the receptor such as residential area. It may give policy maker an idea how to control the air quality, and improve their social environment in the area. This study shows data that measured VOCs concentrations from the local industrial areas in Jeonju during from May 2005 to January 2006. The samples were collected from the near sources in 7 major factories in the industrial park as well as 5 general sources in near city Jeonju area to elucidate the abundances of speciated VOCs and their spacial and temporal distributions depending on source bases. Industrial sources are as follows; chemical, food, paper, wood, metal, non-metal (glass), and painting (coating) industries. The 5 general sources are sampled from tunnel, gasoline gas station, dry cleaning shop, printing (copy) shop, and road pavement working place in urban area. To understand the near source effect at receptor, samples from the 2 receptor sites (one is at center of the industrial complex and the other site is at distance residential area downwind from the center) were collected and analyzed for the comparison to source concentration. The mass contributions of the speciated VOC to total mass of VOCs measured from the different sources and ambient (2 receptors) were presented and discussed.

• 폴리머
• /
• 제33권5호
• /
• pp.397-406
• /
• 2009

유기 박막 트랜지스터 (OTFTs)의 소스-드레인 전극을 스크린 인쇄를 통해 제작하였고, 전극용 페이스트로써 전도성 카본블랙 페이스트를 사용하였다. 전도성 카본블랙 페이스트를 제조하기 위해 서로 다른 분자량 및 고분자 사슬 구조를 갖는 2종류의 분산제(DB-2150, DB-9077)를 사용하여 분산제 함량(SOF; solid on powder, 10-40%)에 따른 카본블랙 밀베이스의 분산 특성을 검토한 결과, 분산제 함량이 증가함에 따라 분산 특성이 더 우수해 짐을 알 수 있었다. 전도성 카본블랙 페이스트를 제조하여 레올로지 측정을 통해 카본블랙의 분산상태 및 응집구조에 대해 검토한 결과, 분산제로 DB-2150을 사용한 페이스트들은 분산제 함량이 증가함에 따라 페이스트의 분산 특성이 향상되어 저장 탄성률(G')이 감소하였지만, DB-9077을 사용한 페이스트들은 카본블랙 사이의 상호작용에 의해 망목구조가 존재하였고, 분산제 함량이 증가함에 따라 카본블랙과 분산제간 또는 분산제간의 상호작용에 의해 페이스트의 저장 탄성률(G')은 더욱 증가하였다. 이러한 응집구조는 페이스트의 내부 저항력 (tacky)을 발생시켜 DB-9077을 사용한 페이스트들은 분산제 함량이 증가함에 따라 스크린 인쇄 적성이 좋지 못하였다. 하지만, 스크린 인쇄된 OTFTs용 소스-드레인 전극의 전기적 특성은 카본블랙 사이에 형성된 망목구조에 의해 카본블랙의 도전 경로(conduction Path)가 형성됨에 따라 DB-2150을 사용한 페이스트들의 OTFTs에 비해 더 우수하였다. 그러나, 2종류의 분산제를 사용한 페이스트 모두, 분산제의 함량이 증가함에 따라 카본블랙 표면을 감싸는 분산제 함량 또한 증가하게 되어 이로 인해 카본블랙간의 도전 경로 형성은 어렵게 되고 전극의 특성은 점점 열화되었다.

• Journal of Electrical Engineering and Technology
• /
• 제3권4호
• /
• pp.546-551
• /
• 2008

In this paper, a flux-lock type superconducting fault current limiter(SFCL) integrated with a voltage-controlled voltage source inverter(VC-VSI) is proposed. The suggested equipment, which consists of a flux-lock type SFCL and a VCVSI, can perform the fault current limiting operation from the occurrence of a short-circuit. In addition, it can compensate the reactive power that the non-linear load requires and also perform the uninterruptible power supply(UPS) as well as the load voltage stabilization by controlling the amplitude and the phase of the inverter's output voltage. The specification for a test model was determined and its various functions such as the fault current limiting and the power conditioning operations were presented and analyzed via computer simulation. Through the analytical results based on the computer simulation, the validity of the analysis was confirmed and its multi-operation was discussed.