• Resources Recycling
• /
• v.19 no.6
• /
• pp.43-50
• /
• 2010

The crisis of energy gives rise to the growing concerns over continuing uncertainty in the energy market. Under these circumstances, there are also increasing interests on coals. In particular, Low Rank Coal (LRC) is receiving gradual attentions from green industry. But due to is high moisture content range from 30 - 60%, drying process has to be preceded before being utilized as power plant. In this study drying kinetics of LRC is induced by using a fixed-bed reactor. The drying kinetics was evaluated in from of the particle size, the inlet gas temperature, the drying time, the gas velocity, and the LID ratio. The consideration of the reynold's number was taken for correction of gas velocity, particle size and LID was taken for correction of reactor diameter, packing height of coal. As being seen as characteristic of drying coal, it can be found that fixed-bed reactor can contributed to active drying of free water. In this sense, it could be considered that phase boundary reaction is appropriate mechanism.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.78-78
• /
• 2013

Recently, many platinoid metals like platinum and ruthenium have been used as an electrode of microelectronic devices because of their low resistivity and high work-function. However the material cost of Ru is very expensive and it usually takes long initial nucleation time on SiO2 during chemical deposition. Therefore many researchers have focused on how to enhance the initial growth rate on SiO2 surface. There are two methods to deposit Ru film with atomic layer deposition (ALD); the one is thermal ALD using dilute oxygen gas as a reactant, and the other is plasma enhanced ALD (PEALD) using NH3 plasma as a reactant. Generally, the film roughness of Ru film deposited by PEALD is smoother than that deposited by thermal ALD. However, the plasma is not favorable in the application of high aspect ratio structure. In this study, we used a bis(ethylcyclopentadienyl)ruthenium [Ru(EtCp)2] as a metal organic precursor for both thermal and plasma enhanced ALDs. In order to reduce initial nucleation time, we use several methods such as Ar plasma pre-treatment for PEALD and usage of sacrificial RuO2 under layer for thermal ALD. In case of PEALD, some of surface hydroxyls were removed from SiO2 substrate during the Ar plasma treatment. And relatively high surface nitrogen concentration after first NH3 plasma exposure step in ALD process was observed with in-situ Auger electron spectroscopy (AES). This means that surface amine filled the hydroxyl removed sites by the NH3 plasma. Surface amine played a role as a reduction site but not a nucleation site. Therefore, the precursor reduction was enhanced but the adhesion property was degraded. In case of thermal ALD, a Ru film was deposited from Ru precursors on the surface of RuO2 and the RuO2 film was reduced from RuO2/SiO2 interface to Ru during the deposition. The reduction process was controlled by oxygen partial pressure in ambient. Under high oxygen partial pressure, RuO2 was deposited on RuO2/SiO2, and under medium oxygen partial pressure, RuO2 was partially reduced and oxygen concentration in RuO2 film was decreased. Under low oxygen partial pressure, finally RuO2 was disappeared and about 3% of oxygen was remained. Usually rough surface was observed with longer initial nucleation time. However, the Ru deposited with reduction of RuO2 exhibits smooth surface and was deposited quickly because the sacrificial RuO2 has no initial nucleation time on SiO2 and played a role as a buffer layer between Ru and SiO2.

• Journal of the Mineralogical Society of Korea
• /
• v.4 no.1
• /
• pp.43-50
• /
• 1991

Two solid solution-type phases has been experimentally found in the quaternary system Cu-Fe-Sn-S:$(Fe, Cu, Sn)_{1+x}$ and $Cu_{2-x}Fe_(1+x}SnS_4$. These solid solutions are stable around the CuS-FeS-SnS referecne plane in the composition tetrahedron. One is the sphalerite-type monosulfide solid solution which has a extensive stability range with varying degrees of sulfur/metal ratio 9.7-1.0/1.0. The other is tetrahedrite-type phase $Cu_{2-y)Fe_{1+y}SnS_4(y_{max}=0.4)$ which is stable along the $Cu_2FeSnS_4-FeS$ tie line, but shows no phase transformation in the subsolidus range and decomposes incongruently at the range of 835-862${\circ}C$, depending on the compositional variation. Particularly, the latter phase shows the characteristic superstructure reflections, indicating that it is a derivative of sphalerite structure. The stability field of these two sphalerite-type phases are defined on the basis of diffraction pattern and optical homogeneity of the synthetic materials at the temperature range of 700-400${\circ}C$.

• Korean Journal of Materials Research
• /
• v.9 no.12
• /
• pp.1245-1251
• /
• 1999

Phase-change optical disk very rapid recording, high densification of data, resulting in high feedback rate and good C/N(carrier to noise) ratio of a feedback signal. However, repetitive thermal energy may cause the deformation of a disk or the lowering of an eliminability and a cyclability of the recording. The lowering of the cyclability can be reduced by insertion of thin layer of ZnS-$SiO_2$ dielectric thin film in appropriate disk structure between the upper and lower part of the recording film. Using the Taguchi method, optimum conditions satisfying both the optimized quality characteristic values and the scattering values for film formation were found to be the target R.F. power of 200W, the substrate R.F. power of 20W, the Ar pressure of 6mTorr, and the electrode distance of 6cm. From the refractive index data, the existence of the strong interaction between the electrode distance and Ar pressure was confirmed, and so was the large effect of the electrode distance on transmittance. According to the analysis of TEM and XRD, the closer the electrode distance was, the finer was the grain size due to the high deposition rate. However, the closer electrode distance brought the negative effect on the morphology of the film and caused the reduction of transmittance. AFM and SEM analyses showed that the closer the electrode distance was, the worse was the morphology due to the high rate of the deposition. Under optimum condition, the deposited thin film showed a good morphology and dense microstructure with less defects.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.2 no.2
• /
• pp.178-184
• /
• 1999

Purpose: The aims of this study were to evaluate the clinical manifestations and prognosis of the syndromic and nonsyndromic intrahepatic bile duct paucity (IHBDP). Methods: We studied histology of 42 infants with neonatal cholestasis. Fourteen patients were diagnosed as IHBDP. We evaluated the clinical manifestations, courses and prognosis retrospectively. Results: Underlying disease of the 42 infants with neonatal cholestasis were biliary atresia in 23, intrahepatic bile duct paucity in 14 (Alagille syndrome in 4 and nonsyndromic IHBDP in 10), neonatal hepatitis in 5 infants. The mean ratio of the bile ducts per portal tract was 0.087 (range: 0~0.5). The manifestations in 4 patients with Alagille syndrome demonstrated as follows: characteristic face in 3, chronic cholestasis in 4, posterior embryotoxon in 2, vertebral anomalies in 2, peripheral pulmonary stenosis in 2. One of 4 patients of Alagille syndrome improved cholestasis and the other 3 patients were remained their cholestasis and growth retardation. All patients of the nonsyndromic IHBDP were idiopathic. Seven out of 8 patients of nonsyndromic IHBDP showed improvement of cholestasis, and one patient received liver transplantation due to cirrhosis. Conclusion: This study suggested that IHBDP should be considered in the differential diagnosis of neonatal cholestasis. The outcome of idiopathic IHBDP was better than predicted.

• Journal of Animal Environmental Science
• /
• v.13 no.3
• /
• pp.161-170
• /
• 2007

Ozone from a pilot-scale ozone generator was treated on fermented pig liquid manure stored in a storage tank in order to reduce odor substances during the process of fermented liquid manure production. The group of ozone treatment showed one less than the organic matter compared that of the control. The preferable condition for characteristic changes was when the ratio of BOD to COD was less than 1.5. Ozone treatment showed better oxidizing power than control as it removed more suspended solids and had less methyl isobutyl ketone(P<0.05). Odor reduction measured by olfactory method was higher in ozone treatment than in control.

• Food Science of Animal Resources
• /
• v.21 no.1
• /
• pp.80-88
• /
• 2001

This study was carried out to evaluate the different physicochemical properties of various lipid sources in beef patties during storage for 6 months. Four groups of samples were made of beef meat patties with 22% of tallow, lard, chicken fat and 20% of palm oil. On the analysis result of physicochemical compositions, the patty has its own fatty acids composition and characteristic different from other lipids. Patty with chicken fat has the highest percentage of unsaturated fatty acid composition of 61.0% compared to the other groups of patties. Beef patty with chicken fat has 18.8% of poly unsaturated fatty acid(USFA) and beef patty with beef lipid has 1.5% of poly USFA which is the least percentage among the others. SFA/USFA ratio of beef patty with chicken lipid was 0.5 which was the least value. The composition of PUFA in beef patty with lard increased to 10.0% from 1.9% over initial value after storage for 6 months. On the contrary, the composition of PUFA in beef patty with chicken fat decreased to 9.2% from 18.8% over initial value after 6 months. Volatile free fatty acids of beef patties were evaluated with four kinds of lipid sources. Formic acid was the most as of 59$\mu\textrm{g}$/g in beef patty with tallow, acetic acid was 15$\mu\textrm{g}$/g, and heptanoic acid was 10$\mu\textrm{g}$/g at starting time of storage. However, propionic acid, butyric acid, valeric acid and caproic acid were not detected. After 6 months, formic acid decreased from 59$\mu\textrm{g}$/g to 7$\mu\textrm{g}$/g in the patty with tallow, from 12$\mu\textrm{g}$/g to non-detect level in the patty with palm oil, but two the others patties slightly increased. Volatile compounds in meat patties were reported nearly 1000 kinds of chemical compounds. Beef patty with tallow has aldehydes 5.3, alcohol 1.3, hydrocarbon 0.8, ketones 0.2, ester 0.1, furans 0.1, acid 0.04, sulfur 0.03 in peak area at starting and increased to aldehydes 8.5, alcohol 2.1, ketones 0.5, ester 1.0, furans 1.5 in peak area during the storage. But only furans was not detected after 6 months of storage. From starting to 6 months, aldehydes increased 2∼10 times, alcohol increased 2∼3 times, acids 4∼50 times and ester 9∼20 times in beef patties with pork lipid, chicken lipid and palm oil. Some volatile compounds such as alcohol, aldehydes and acids in all kinds of patties significantly increased after 6 months of storage. These increases cause oxidative rancidity taste in meat patties. These results showed that selt-life of meat patties with 4 different lipids were not over 6 months even though they were stored at -20$^{circ}C$. Therefore, they should be classified as off-grade because of oxidative rancidity. Although beef patties with tallow are currently common type, the possibility for new type of hamburg patty can be developed by applying different lipids. Finally, we found out new type of beef patty added with lard, which has the best taste and quality compared to the other common types.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.635-646
• /
• 2016

This paper proposes a housing business model, where the presale and Chonsei housing are supplied under a presale system at the same time based on the characteristic correlation between the housing presale market and Chonsei market in Korea. Markowitz portfolio theory was used to review the risk diversification effects from the changes in the ratio between the presale housing supply and the Chonsei housing supply. The housing sale price indicator was used as a proxy variable to determine the presale housing supply. The housing Chonsei price indicator was used as a proxy variable to determine the Chonsei housing supply. The proposed housing business model was applied to major areas in Korea to examine the risk diversification effect. Comparisons of the regional portfolio analyses showed that the flexibility of the proposed housing business model can be quite effective because each regional housing market exhibits different characteristics. Market participants, such as developers, construction companies, consumers, and government, can expect various effects through the proposed housing business model. Nevertheless, policy support is necessary for practical applications of the proposed housing business model. In particular, public funds from the government need to be introduced.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.4
• /
• pp.1-10
• /
• 2008

Shear wave velocity($V_S$), which can be obtained using various seismic tests, has been emphasized as representative geotechnical dynamic characteristic mainly for seismic design and seismic performance evaluation in the engineering field. For the application of conventional geotechnical site investigation techniques to geotechnical earthquake engineering, standard penetration tests(SPT) and piezocone penetration tests(CPTu) together with a variety of borehole seismic tests were performed at many sites in Korea. Through statistical modeling of the in-situ testing data, in this study, the correlations between $V_S$ and geotechnical in-situ penetrating data such as blow counts(N value) from SPT and piezocone penetrating data such as tip resistance ($q_t$), sleevefriction($f_s$), and pore pressure ratio($B_q$) were deduced and were suggested as an empirical method to determine $V_S$. Despite the incompatible strain levels of the conventional geotechnical penetration tests and the borehole seismic tests, it is shown that the suggested correlations in this study are applicable to the preliminary estimation of $V_S$ for Korean soil layers.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.61-70
• /
• 2008

This paper designed the antenna for collecting and servicing the traffic information that apply to freeway Traffic Management System, as using DSRC (Dedicated Short Range Communication). Active DSRC is the technology that is using 5.8GHz Radio Frequency to a mean Sequency and there are a lot of the case occurring a physical electric wave shadowing because of the traveling straight of a electric wave. In such inferior communication environment, it constructed the stabilized communication link that can do collecting and servicing the correct traffic information and designed the beam pattern considering the establishment position of the antenna that can apply to various road environments and a communication area. By considering the communication link environment, this paper designed and manufacture the mean frequency of 5.8GHz, the input loss of -17dB in 75MHz bandwidth, the Axial ratio of 1.5:1, and $2{\times}4$ array microstrip antenna which beam pattern have the characteristic of $55^{\circ}$ horizontal half power beam width and $26^{\circ}$elevation half power beam width and the minimum establishment height of the antenna was designed as 14m for avoiding electric wave shadowing on a physical condition between vehicles