• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.676-680
• /
• 2010

In this paper, Fin-type silicon-oxide-nitride-oxide-silicon (SONOS) flash memory are fabricated and the electrical characteristics are analyzed. Compared to the planar-type SONOS devices, Fin-type SONOS devices show good short channel effect (SCE) immunity due to the enhanced gate controllability. In memory characteristics such as program/erase speed, endurance and data retention, Fin-type SONOS flash memory are also superior to those of conventional planar-type. In addition, Fin-type SONOS device shows improved SCE immunity in accordance with the decrease of Fin width. This is known to be due to the fully depleted mode operation as the Fin width decreases. In Fin-type, however, the memory characteristic improvement is not shown in narrower Fin width. This is thought to be caused by the Fin structure where the electric field of Fin top can interference with the Fin side electric field and be lowered.

• The Journal of the Korea Contents Association
• /
• v.11 no.6
• /
• pp.360-371
• /
• 2011

This study dealt with the effect of the university in area development to Cheonan city. This study ran parallel literature investigation and actual proof investigation. Questionnaires 394 enforce frequency analysis in SPSS 15.0 versions. University positive effect on local community is smooth supply of human capital in local community, increase of regional income, improvement of area image by expanded education opportunities, supply of various university facilities in local communities etc. Contradictory effect is expansion of gap for areas that young persons in local community taken to education of good quality leave other local community, occurrence of conflict by collision of new culture and culture of area characteristic. Role of university for area development is role of help consultation, symbolic role, educational role etc. But the weighed role is leading role which university leads area development. Finally, the prompting methods of university for local community development .must accomplish interchange of operational mode with high quality human resources activating removal of manpower between arithmetic.

• Analytical Science and Technology
• /
• v.33 no.1
• /
• pp.23-32
• /
• 2020

Methamphetamine (MA) is the most common and available drug of abuse in Korea and its primary metabolite is amphetamine (AP). Detection of AP derivatives, such as MA, AP, phentermine (PT), MDA, MDMA, and MDEA by the use of immunoassay screening is not reliable and accurate due to cross-reactivity and insufficient specificity/sensitivity. Therefore, the analytical process accepted by most urine drug-testing programs employs the two-step method with an initial screening test followed by a more specific confirmatory test if the specimen screens positive. In this study, a gas chromatography-mass spectrometric (GC-MS) method was developed and validated for confirmation of MA and AP in human urine. Urine sample (500 µL) was added with N-isopropylbenzylamine as internal standard and ethyl chloroformate as a derivatization reagent, and then extracted with 200 µL of ethyl acetate. Extracted samples were analysed with GC-MS in the SIM/ Scan mode, which were screened by Cobas c311 analyzer (Roche/Hitachi) to evaluate the efficiency as well as the compatibility of the GC-MS method. Qualitative method validation requirements for selectivity, limit of detection (LOD), precision, accuracy, and specificity/sensitivity were examined. These parameters were estimated on the basis of the most intense and characteristic ions in mass spectra of target compounds. Precision and accuracy were less than 5.2 % (RSD) and ±14.0 % (bias), respectively. The LODs were 3 ng/mL for MA and 1.5 ng/mL for AP. At the screening immunoassay had a sensitivity of 100% and a specificity of 95.1 % versus GC-MS for confirmatory testing. The applicability of the method was tested by the analysis of spiked urine and abusers' urine samples.

• Analytical Science and Technology
• /
• v.13 no.3
• /
• pp.385-393
• /
• 2000

A gas chromatography-mass spectrometric (GC/MS) procedure for the determination of amineptine (dihydro-10, 11-dibenzo[a, d] cycloheptenyl-5-amino-7-heptanoic acid) and its main metabolites in human urine was described. Amineptine has been known to be extensively metabolized by the ${\beta}$-oxidation of the heptanoic side chain with formation of pentanoic side chain metabolite ($C_5$-metabolite), and lactamizarion by internal dehydration of (${\beta}$-oxidized metabolite (${\delta}$-lactam). The detection of these compounds was based on acid hydrolysis, liquid-liquid extraction and trimethylsilylated derivatization of the carboxylic acid group. For the determination of amineptine and its metabolites in biological fluids, selected ions at the m/ 192, molecular ion and one of the characteristic ions were monitored by GC/MS. On the excretion study of amineptine in human urine, 70-90% of amineptine, ${\delta}$-lactam, and $C_5$-metabolite were found to be excreted within 4 hours and their excretion completed within 20 hours.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.145-148
• /
• 2012

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold typedisplay mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by counting between on time and off time for video signal input during 1 frame (16.7ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• Journal of Korea Multimedia Society
• /
• v.8 no.10
• /
• pp.1337-1346
• /
• 2005

In this paper, we describe an algorithm which can automatically recognize human gesture for Human-Robot interaction. In early works, many systems for recognizing human gestures work under many restricted conditions. To eliminate these restrictions, we have proposed the method that can represent 3D and 2D gesture information simultaneously, APM. This method is less sensitive to noise or appearance characteristic. First, the feature vectors are extracted using APM. The next step is constructing a gesture space by analyzing the statistical information of training images with PCA. And then, input images are compared to the model and individually symbolized to one portion of the model space. In the last step, the symbolized images are recognized with HMM as one of model gestures. The experimental results indicate that the proposed algorithm is efficient on gesture recognition, and it is very convenient to apply to humanoid robot or intelligent interface systems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.3
• /
• pp.32-43
• /
• 2014

This paper presents the intra capacitance modeling according to the winding method, section bobbin and coil structure for hybrid choke coil capable of the EMI attenuation of broad bands from lower frequency bands to higher frequency bands and high frequency type common-mode choke coil capable of the EMI attenuation of high frequency band used in the EMI Block of LED-TV SMPS. In case of high frequency type CM choke coil, it can be explained the parasitic capacitance of A type and section bobbin type winding methods among them is much smaller than the other. The first resonant frequency of the proposed CM choke coil tends to increase as the parasitic capacitance becomes small and its impedance characteristics also show improved performance as the first resonant frequency increases. In case of hybrid choke coil using rectangular copper wire, it has investigated its parasitic capacitance compared to CM choke coil of conventional toroidal type becomes small. Also it has confirmed through the experiment results that CE margin and RE margin in frequency bands 0.5MHz to 5MHz and 30MHz to 200MHz are respectively 10dB and 15dB greater than that of conventional type in case of one stage EMI filter structure adopting hybrid choke coil compared to two stage EMI Filter structure using two of each CM choke coil used in the lower and higher frequency bands or two of CM choke coil used in only the lower frequency bands. In the future, the hybrid choke coil and CM choke coil of high frequency type show it can be practically used in not only LED/LCD-TV SMPS but also several applications such as LED Lighting, Laptop Adapter, Server Power Supply and so on.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.52-57
• /
• 2010

The low viscous epoxy resin(bisphenol F) with carboxylic acid as the reductants was introduced for high performance and reliability in the ACA with a low melting point alloy filler system. The curing characteristics of the epoxy resin and temperature dependant viscosity characteristic of epoxy resin at the melting temperature of LMPA were investigated by dynamic mode of differential scanning calorimetry (DSC) and rheometer, respectively. Based on these thermo-rheological characteristics of epoxy resin and LMPA, the optimum process system was designed. In order to remove the oxide layer on the surface of LMPA particle, three different types of carboxyl acid-based reductant were added to the epoxy resin. The wetting angles were about $18^{\circ}$ for carboxypropyldisilioxane, and $20.3^{\circ}$ for the carboxy-2-methylethylsiloxane, respectively.

• The Research Journal of the Costume Culture
• /
• v.6 no.1
• /
• pp.136-148
• /
• 1998

This is a study on the change of the Medievalmen's underclothes. Underclothing includes all such articles, worn by either sex, as were completely or mainly concealed from the spectator by the external costume. Throughout the Middle Ages, the underclothing of both sexes possessed characteristic inherited from earlier times. Its function was purely utilitarian. It was not used to express class distinction and only very indirectly to enhance sex attraction. The idea of underclothes was associated with the idea of the body's sinfulness. Underclothes could also symbolize the discipline of humility. To appear clad only in underclothes was a voluntary form of selfabasement often practised by pilgrims. The notion that underclothes might express the spirit of the changing times, in sympathy with the outer clothing, did not enter the medieval mind. The length of the shirt was less than that of the modern garment, especially after the middle of the fourteenth century. The sleeves were somewhat full, without cuffs, and cut straight. During the second half of the twelfth century, when braies become definitely an undergarment. In the fourteenth century braies became shorter and shorter and the shirt could no longer be tucked in but hung outside over the thighs. After 1340 the costume on the surface somewhat resembling modern 'tights', began to reveal display the shape of the male leg as a form of sex attraction. By the close of the Middle Ages, braies had become less like loincloths, and more like modern bathing trunks. The peasant and laborer did not attempt to keep pace with the changes of fashion but, continued, as a rule, to wear the long braies of their forefathers. The higher ranks how this garment reflected the changes of the mode of outer costumes.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.123-129
• /
• 2017

Proton Exchange Membrane Fuel Cell (FEMFC) is a strong candidate for future automobile and power generation because of its high power density, low emission and low operation temperature. The major concerns of the gas diffusion layer (GDL) inside a FEMFC is water management. The GDL is typically comprised of carbon for electrical conductivity and PTFE for Hydrophobicity. In this simulation, GDL flooding was investigated using a simplified approach method of an established equation models(Fick' Law, Darcy, Law, Stefan-Maxwell diffusion). The performance of GDL was shown using result of the inner heat, water density and oxygen density of the cell using model equations. The catalyst layer mode in FEMFC showed results of effectiveness factor, Butler-volmer and hydrogen flux density. These results are interesting because the influence of several factors has been shown and the information will be helpful for fuel cell design.