• Carbon letters
• /
• v.14 no.1
• /
• pp.34-39
• /
• 2013

Acrylonitrile (AN)-acrylamide (AM) copolymers were prepared by nitric acidic hydrolysis of homopolyacrylonitrile. The acrylamino group increased as a function of hydrolysis time, while crystallinity decreased. Differential scanning calorimetry and a thermal gravimetric analysis indicated that the acylamino introduced by acidic hydrolysis effectively enhanced the cyclization reaction at low temperature due to the change of the cyclization reaction mechanism. Char-yield of AN-AM copolymers also gradually increased with increasing hydrolysis time. The maximum char-yield was 49.48% when hydrolized at $23^{\circ}C$ in 65% nitric acid solution for 18 h, which was 30% higher than that of non-acidic hydrolysis of homopolyacrylonitrile. Simulation of the practical process also showed an increase of char yields, where the char yields were 55.43% and 62.60% for homopolyacrylonitrile and copolyacrylonitrile, respectively, with a hydrolysis time of 13 h.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.33-36
• /
• 2014

Gasification of biomass produces syngas containing CO, $H_2$ and/or $CH_4$, which can then be converted into energy or value-added fuels. One of key issues for efficient gasification is to minimize tar concentration in the syngas for use in a final conversion device such as gas engine. This study investigated the decomposition of primary tar by catalytic cracking using char as catalyst, of which the feature can be integrated into a fixed bed gasifier design. The pyrolysis vapor containing tar from pyrolysis of wood at $500^{\circ}C$ was passed through a reactor filled with or without char at $800^{\circ}C$ for a residence time of 1, 3 or 5 sec. Then, the condensable vapor (water and tar) and gases were analyzed for the yields and elemental composition. Four types of char particles with different microscopic surface area and pore size distribution: wood, paddy straw, palm kernel shell and activated carbon. The results were analyzed for the mass and carbon yields of tar and the composition of product gases to conclude the effects of char types and residence time.

• Carbon letters
• /
• v.1 no.2
• /
• pp.60-63
• /
• 2000

In this work, the carbon fibers-reinforced carbon matrix composites made with different carbon char yields of phenolic resin matrix have been characterized by mechanical flexural tests for acoustic emission properties. The composites had been fabricated in the form of two-dimensional polyacrylonitrile based carbon fibers during the carbonization process. It was found that the composites made with the carbon char yield-rich of resin matrix result in better mechanical interfacial properties, i.e., the interlaminar shear strength (ILSS) of the composites. The data obtained from the acoustic emission monitored appeared to show that the composites made with carbon char yield-rich were also more ductile. From the acoustic emission results, the primary composite failure was largely depended on the debonding at interfaces between fibers and matrix. The interlaminar shear strengths of the composites were correlated with the acoustic emission results.

• Journal of the Korean Society of Combustion
• /
• v.17 no.2
• /
• pp.32-39
• /
• 2012

In this study, pre-processor code based on structural behavior of coal is applied to predict yields, pyrolysis rate and compositions of volatile and char. These parameters are used in the devolatilization and char burnout sub-models as user-defined functions of commercial CFD code. The predicted characteristics of these sub-models are compared with those employing the conventional model based on experiment and validated against the measurement of a 2.1 MW swirling pulverized coal flame in a semi-industrial scale furnace. And the influence of the turbulence-chemistry interaction on pulverized coal combustion is analyzed.

• Elastomers and Composites
• /
• v.52 no.2
• /
• pp.143-153
• /
• 2017

Herein we studied the characterization of the PBO films formed via solution casting and thermal cyclization of poly(o-hyroxyamide)s(PHAs) that were synthesized by direct polycondensation of 3,3'-dihydroxybenzidine with 4,4'-(2,3-quinoxalinedioxy) dibenzoic acid and/or 4,4'-(2,3-pyridinedioxy) dibenzoic acid. All the PHAs exhibited inherent viscosities in the range of 0.55~0.84 dL/g in DMAc solution. The copolymers, CPH-2-5, were partially soluble in less polar solvents like pyridine and THF. However, all the PBOs were not soluble in polar solvents, but only partially soluble in sulfuric acid. The temperatures corresponding to 10% weight loss of the PBOs with increasing content of quinoxalinedioxy unit were higher than those of the PHAs, and the char yields at $900^{\circ}C$ in $N_2$, tensile strength, and initial modulus of the PBOs were 1.1~1.3 times, 1.2~1.8, and 1.6~3.3 times higher, respectively, than those of the PHAs. The LOI value of CPB-2 was 38.5%, while that of CPB-1 was the highest at 40.0%. The LOI test confirmed that excellent flame retardants were synthesized.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.217-219
• /
• 2012

This study describes 3D RANS simulation of a 2.1 MW swirling pulverized coal flame in a semi-industrial scale furnace. The simulation of pulverized coal combustion involves various models for complex physical processes and needs information of pyrolysis rate, the yields and compositions of volatiles and char especially in coal conversion. The coal conversion information can be acquired by the experiment or the pre-processor code. The empirical model based on the experiment of the IFRF and the structural model based on the pre-processor code of the PC-COAL-LAB were evaluated against the measurement data.

• Elastomers and Composites
• /
• v.54 no.4
• /
• pp.321-329
• /
• 2019

A series of poly(hyroxyamide)s (PHAs) was prepared by direct polycondensation reaction of 4,4'-(2,3-pyridinedioxy)dibenzoic acid and/or isophthalic acid with 3,3'-dihydroxybenzidine. The yield percentages of the products were high, and the inherent viscosities of the polymer in DMAc solution at 35℃ were 0.31-0.59 dL/g. All PHA polymers were found to be soluble in polar aprotic solvents such as DMAc, DMSO, NMP, and DMF. On the other hand, LiCl was required to dissolve IPHA-1 in aprotic solvents. Poly(benzoxazole)s (PBOs) were partially soluble in conc-H₂SO₄; IPBO-4, -5, and -6 were partially soluble in NMP only when LiCl was added to the solution, and the solution was heated. The PBO polymers showed a maximum weight loss in the temperature range of 654-680℃, and the char yields at 900℃ under nitrogen atmosphere exceeded 63%.

• Elastomers and Composites
• /
• v.55 no.3
• /
• pp.205-214
• /
• 2020

A series of wholly aromatic polyhyroxyamide (PHA) copolymers were prepared by direct polycondensation reaction of isophthalic acid and diacids containing bulky units with 3,3'-dihydroxybenzidine. The inherent viscosities of the PHAs measured at 35℃ in DMAc solution were in the range of 0.31-0.56 dL/g. The solubility study revealed that the PHAs were readily soluble in aprotic solvents such as, dimethylacetamide (DMAc), dimethyl sulfoxide (DMSO), and N-methyl-2-pyrrolidone (NMP) at room temperature and in less polar solvent such as pyridine. However, the polybenzoxazole (PBO) copoymers were quite insoluble in all organic solvents except partially soluble in concentrated sulfuric acid and partially soluble in NMP containing LiCl. The PBO copolymers showed maximum weight loss temperature in the range of 593-632℃ and high char yields in the range of 65.0-71.2% at 900℃ in a nitrogen atmosphere.

• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.238-248
• /
• 2007

A series of polyhydroxyamides(PHAs) having ether linkages in the polymer backbone were prepared via solution polycondensation at low temperature. These polymers were studied by FT-IR, $^1H-NMR$, DSC, TGA and PCFC. The PHAs exhibited inherent viscosities in the range of $0.5{\sim}1.1dL/g\;at\;35^{\circ}C$ in DMAc solution. Most of PHAs except PHA 3 were soluble in polar organic solvents such as N,N-dimethylacetamide(DMAc), N-methyl-2-pyrrolidone(NMP), and N,N-dimethylform-amide(DMF). Subsequent thermal treatment of PHAs afforded polybenzoxazols(PBOs). However, the PBOs were insoluble in a variety of solvents. Most of the PBOs except PBO 3 showed glass-transition temperature($T_g$) in the range of $200{\sim}246^{\circ}C$ by DSC and maximum weight loss temperature in the range of $597{\sim}697^{\circ}C$ in nitrogen by TGA. PBOs showed high char yields in the range of $51{\sim}64%$. PCFC results of the PBOs showed the heat release(HR) capacity, $8{\sim}65J/gK$ and total heat release(total HR), $2.4{\sim}4.7kJ/g$.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.209-212
• /
• 2012

This study was performed to analyze coal flames and measure tar and soot yields and structures of chars for two coals depending on the volatile content by the LFR(Laminar Flow Reactor) which can be applied to a variety of coal researches. The results show that volatile contents and oxygen concentration have significant influence on length and width of the soot cloud and it also indicate that the length and width of the cloud in condition of combustion decrease than those of pyrolysis atmosphere. Until the sampling height reach at 50 mm, the tar and soot yields of Berau (Sub-bituminous) coal contained relatively lots of volatile matters are less than those of Glencore A.P. (Bituminous) coal. On the other hand, tar and soot yields of Berau coal are higher than those of Glencore A.P. coal by reacted residual volatile matter. In addition, the images of samples obtained from the particle separation system of the sampling probe support for above results with the yields, and the pore development of char surface by devolatilization.