• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.36-43
• /
• 2017

The results of a numerical study on the performance of a propeller operating near a free surface are presented in this paper. The simulations are verified through comparison with experimental data, which was performed in a circulating water channel. The propeller performance as a function of the submerged depth was investigated. The effect of the propeller advance ratio on the wave patterns, flow structures around propeller, and thrust and torque of the propeller was also studied. Air ventilation was not observed for low advance coefficients. However, the simulations showed that wave pattern was strongly related to the tip vortex strength and inflow velocity. When air ventilation does not occur, the deduction of propeller thrust and torque increase for high advance coefficients.

• Journal of Energy Engineering
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2008

The present study has been conducted to understand the heat and mass transfer characteristics of humid airflow in frosting conditions. A flat plate of aluminum was used for the simulation of flat surface part of the fin of the heat exchanger. The aluminum surface temperatures were measured and analyzed to clarify the heat and mass transfer characteristics under frosting conditions. Also, the pressure drops were measured to clarify the air-blocking effect of frost in the mini channel of the air-side hoot exchangers. A data reduction method was developed far the analysis of local characteristics of humid air under frosting conditions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.95-105
• /
• 2012

The selective catalytic reduction (SCR) system is a highly-effective aftertreatment device for NOx reduction of diesel engines. Generally, the ammonia ($NH_3$) was generated from reaction mechanism of SCR in the SCR system using the liquid urea as the reluctant. Therefore, the precise urea dosing control is a very important key for NOx and $NH_3$ slip reduction in the SCR system. This paper investigated NOx and $NH_3$ emission characteristics of urea-SCR dosing system based on model-based control algorithm in order to reduce NOx. In the map-based control algorithm, target amount of urea solution was determined by mass flow rate of exhaust gas obtained from engine rpm, torque and $O_2$ for feed-back control NOx concentration should be measured by NOx sensor. Moreover, this algorithm can not estimate $NH_3$ absorbed on the catalyst. Hence, the urea injection can be too rich or too lean. In this study, the model-based control algorithm was developed and evaluated on the numerical model describing physical and chemical phenomena in SCR system. One channel thermo-fluid model coupled with finely tuned chemical reaction model was applied to this control algorithm. The vehicle test was carried out by using map-based and model-based control algorithms in the NEDC mode in order to evaluate the performance of the model based control algorithm.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.1
• /
• pp.1-8
• /
• 2001

This study deals with the experimental and numerical investigations to design the high performance otter board. Experiment was carried out to determine the most effective slot size of single-slot cambered otter board in the circulation water channel of BAEK KYUNG IND. Co. LTD. Numerical analysis was done by the commercial CFD code, FLUENT, to provide some valuable physical interpretations and finally to design the otter board section by numerical method. The major results are as follows ; 1. In experiment, the maximum lift and drag coefficients of simple cambered type otterboard were 1.41, 0.55, respectively, at the angle of attack $28^\circ$, while those of slot one with slot size 0.02C (C denotes the chord length) were 1.72, 0.42 at the angle of attack $24^\circ$. 2. The hydrodynamic characteristics depending upon slot size shows the greatest at 0.02C of the slot size. 3. Numerical results well visualized the streamlines, pressure fields, and speed vectors of a simple cambered and slot cambered otter board with slot size 0.02C. The slot cambered one with slot size 0.02C was shown that pressure field was distributed moderately on front and back side of otter board. And, the delay and decrease of separation were favorably achieved by flow through slot. 4. Computed result on the pattern of hydrodynamic field and the values of $C_L$ and $C_D$ by the commercial CFD code, FLUENT, show almost the same as those of the experimental result.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1822-1826
• /
• 2009

최근 국내 하천복원사업의 방향(패러다임)이 구하도를 포함한 홍수터의 중요성을 인식하게 됨에따라 과거 하천사업 시 발생되었던 폐천구역을 가능한 한 하천구역에 편입하여 보존하려는 노력이 시도되고 있다. 본 연구는 하천복원사업의 일환으로 함평천 구하도 복원을 함으로써 발생할 수 있는 흐름특성변화 및 하상변화를 파악하기 위한 목적으로 수리모형실험과 수치모의를 수행하였다. 실험대상구간은 함평천 중류 구하도 복원구간(1.34 km)이며, 수리모형은 Froude 상사법칙에 따라 수평축척 1/50, 연직축척 1/25의 모형으로 제작하였다. 실험조건으로는 재현기간 50년, 100년의 홍수량과 강턱유량 두 케이스$(100\;m^3/s$, $120\;m^3/s)$를 적용하였고, 구하도 복원수로의 흐름특성은 고정상 조건에 대해 분석하였다. 구하도 복원전/후의 홍수위 비교를 통해 구하도 복원후의 하도에서는 단면확대로 인한 통수능 증가로 홍수위 저감효과를 확인 할 수 있었다. 구하도 복원후의 유속변화는 통수능의 증가로 복원전에 비해 저감되었다. 기존하도와 복원하도간의 유속차가 다소 크게 나타났는데 이는 복원하도의 단면형상과 와류발생으로 인해 나타난 것으로 판단된다. 복원하도내의 유황은 일부구간에서 흐름정체현상과 역류현상이 발생되는데 이 구간에는 퇴적현상이 예측된다. 수리모형실험의 유사퇴적경향과 FESWMS 모형의 하상전단력을 비교한 결과는 유사하게 나타났으며, 복원하도의 넓은 둔치지역에 넓은 퇴적층이 형성되어 차후 환경구조물 등을 이용한 흐름제어 및 유지관리대책에 의한 문제해결이필요할 것으로 판단된다.

• Membrane Journal
• /
• v.26 no.6
• /
• pp.421-431
• /
• 2016

Novel membrane technologies that harness ordered nanostructures have recently received much attention because they allow for high permeability due to their reduced flow resistance while also maintaining high selectivity due to their isoporous characteristics. In particular, the opaline structure (made from the self-assembly of colloidal particles) and its inverted form (inverse-opal) have shown strong potential for membrane applications on account of several advantages in processing and the resulting membrane properties. These include controllability over the pore size and surface functional moieties, which enable a wide range of applications ranging from size-exclusive separation to catalytically-reactive membranes. Furthermore, when combined with multiscale architecturing strategies, inverse-opal-structured membranes can be designed to have specific pores or channel structures. These materials are anticipated to be utilized for next-generation, high-performance, and high-value-added functional membranes. In this review article, various types of inverse-opal-structured membranes are reviewed and their functionalization through hierarchical structuring will be comprehensively investigated and discussed.

• Journal of Korean Public Health Nursing
• /
• v.6 no.2
• /
• pp.58-69
• /
• 1992

The purposes of this study were 1) to assess the currunt documentation system 2) to identify the problems in communication regarding to documentation 3) to develop new documentation system 4) to suggest effective communication channel using new documentation system Research was conducted by direct observation, chart review, staffs interview and servey. Results were as follows: 1) nursing care plans were not used in ongoing care 2) documentation format was primarily narrative and charting was time consuming 3) documentation did not reflect the nursing process 4) patient records were not used as effective communication tool between case manager and part time nurse 5) difficult access to patient record for nurse manager created inefficiency in coordinating 6) documentation of patient education did not describe the precise contents of education, and the responses of the patients and evaluation To solve these problems, new documentation format was developed. With new formats nurses : 1) use standardized care plan which contains nursing diagnosis, ecpected outcome, time frame for evaluation, flow sheet for updating the plans 2) leave one copy of care plan at patient home for mutual agreement with patent and communication among nursing staffs 3) carry one copy of care plan for updating 4) document and evaluate the patient education using education check list keeping in patient's home 5) document nursing process in focus charting visit report 6) carry one copy of visit report 7) have one copy of visit report which was deligated to part time nurses 8) use documentation in direct communication with part time nurse 9) use beeper and memo to promote communication

• Journal of Ocean Engineering and Technology
• /
• v.26 no.4
• /
• pp.37-41
• /
• 2012

Due to global warming, the need to secure alternative resources has become more important nationally. Because of the very strong current on the west coast, with a tidal range of up to 10 m, there are many suitable sites for the application of TCP (tidal current power) in Korea. In the southwest region, a strong current is created in the narrow channels between the numerous islands. A rotor is an essential component that can convert tidal current energy into rotational energy to generate electricity. The design optimization of a rotor is very important to maximize the power production. The performance of a rotor can be determined using various parameters, including the number of blades, shape, sectional size, diameter, etc. There are many offshore jetties and piers with high current velocities. Thus, a VAT (vertical axis turbine) system, which can generate power regardless of flow direction changes, could be effectively applied to cylindrical structures. A VAT system could give an advantage to a caisson-type breakwater because it allows water to circulate well. This paper introduces a multi-layer vertical axis tidal current power system. A Savonius turbine was designed, and a performance analysis was carried out using CFD. A physical model was also demonstrated in CWC, and the results are compared with CFD.

• Journal of Ecology and Environment
• /
• v.40 no.1
• /
• pp.12-19
• /
• 2016

Background: Direct impact of inorganic carbon (i.e., carbon dioxide ($CO_2$)) on the periphyton community is important to understand how and to what extent atmospheric conditions can affect the structure and dynamics of these communities in lotic systems. We investigated the influence of elevated $CO_2$ concentration on the periphyton community in the artificially constructed channels during the winter period. The channels made of acrylic paneling were continuously supplied with surface water discharged from a small reservoir, which was supported with ground water, at a flow rate of 5 L/min, and water temperature ranging $4-5^{\circ}C$. The effects of elevated $CO_2$ concentrations (790 ppm) were evaluated in comparison with the control (395 ppm $CO_2$) by analyzing pH, water carbon content and nutrients in water, periphyton composition and biomass, chlorophyll-a, ash-free dry-matter at 2-day intervals for 10 days. Results: After the addition of $CO_2$, significant decreases of pH, $NH_3-N$, and $PO_4-P$ (p < 0.05) and increases of chlorophyll-a, ash-free dry-matter, and the cell density of periphyton (p < 0.01) were observed, whereas the species composition of periphyton and water carbon content did not change. Conclusions: These results suggest that elevated $CO_2$ in flowing water system with low temperature could facilitate the growth of periphyton resulting in biomass increase, which could further influence water quality and the consumers throughout the food web.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.1
• /
• pp.68-75
• /
• 2011

The performance of peripheral devices is improving rapidly to meet the needs of users for multimedia data. Therefore, the peripheral interface with wide bandwidth and high transmission rate becomes necessary to handle large amounts of data in real time for multiple high-performance devices. PCI Express is a fast serial interface with the use of packets that are compatible with previous PCI and PCI-X. In this paper, we design and verify general peripheral interface using serial link. It includes two kinds of traffic class (TC) labels which are mapped to virtual channels (VC). The design adopts TC/VC mapping and the scheme of arbitration by priority. The design uses a packet which can be transmitted through up to four transmission lanes. The design of general peripheral interface is described in Verilog HDL and verified using ModelSim. For FPGA verification, Xilinx ISE and SPARTAN XC3S400 are used.We used Synopsys Design Compiler as a synthesis tool and the used library was MagnaChip 0.35um technology.