• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1269-1274
• /
• 2010

Wireless communication channels with the most severe multipath fading phenomenon that appears each time a different delay is caused by the frequency selective fading. At this time, ISI due to the performance degradation of wireless communication channels and data transfer speed gives the constraints. OFDM technique can remove ISI inserting longer guard interval than channel delay spread of channel between symbol. However, the multi-path delay of the channel to be serious with the guard interval can not eliminate ISI. In this case, using the equalizer must compensate. Especially, use of equalizer is need absolutely as data rate becomes high speed. In this paper, we analyze the BER performance with pre-equalization for MIMO-OFDM over fading channel. The results of this paper can be applied to MIMO-OFDM system with equalization.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.35-38
• /
• 2003

We propose a switched beamforming to improve the reception performance of VSB system in severe Rayleigh fading channel. The VSB system has only about 3% of known training signal for the receiver in a data field and the reception performance of VSB receiver is degraded significantly when there are near-0 dB ghosts in receiving signal. The switched beamforming forms several beams in different directions and selects only one beam among them. For the selection of a beam with best channel condition for VSB equalizer, we extracted the channel profiles in time domain for all the beams by correlating the PN511 sequence in VSB field sync and selected optimal beam by comparing the channel profiles. The simulation results show that the proposed method improves the reception performance of VSB system in severe Rayleigh channel.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.383-391
• /
• 2009

In this paper, blind equalization using a modified Fuzzy C-Means algorithm with Gaussian Weights (MFCM_GW) is attempted to the heavy noise-corrupted channels. The proposed algorithm can deal with both of linear and nonlinear channels, because it searches for the optimal channel output states of a channel instead of estimating the channel parameters in a direct manner. In contrast to the common Euclidean distance in Fuzzy C-Means (FCM), the use of the Bayesian likelihood fitness function and the Gaussian weighted partition matrix is exploited in its search procedure. The selected channel states by MFCM_GW are always close to the optimal set of a channel even the additive white Gaussian noise (AWGN) is heavily corrupted in it. Simulation studies demonstrate that the performance of the proposed method is relatively superior to existing genetic algorithm (GA) and conventional FCM based methods in terms of accuracy and speed.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.25-28
• /
• 2001

In this paper. to eliminate a cross-polarization interference caused by co-channel dual polarization technique of digital radio relay system(DRRS), a cross-polarization interference canceller(XPIC) is analysed in terms of the analytical modeling, digital design, and its performance. By virtue of a 13-tap adaptive equalizer and XPIC, about 23dB in XPIC improvement can be obtained by computer simulation. To show the operation of designed XPIC, some simulated results are reviewed under 64-QAM DRRS with co -channel dual Polarization.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.765-768
• /
• 2000

In this paper, we analyze the channel estimation method by using Reference symbols for burst OFDM transmission systems. We set some parameters (the number of Reference symbols, the pilot spacing in Reference symbols, the update constant of equalizer coefficients) to evaluate their performance in the fixed multipath fading channel as like indoor environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.107-113
• /
• 2011

This paper is concerned with the CR-CMA (Coordinate Reduction-Constant Modulus Algorithm) adaptive equalization algorithm using the coordinate reduction in order to improve the convergence characteristic and residual intersymbol interference which are used as the performance index for an adaptive equalizer. The equalizer is used to reduce the distortion caused by the intersymbol interference on the wireless and the wired band-limited channel that connect the transmitting system and receiving system. The CMA is widely known as the representative algorithm for equalization. In order to transmitting the mass information with a high speed through the channels, a fast convergence speed in the equalizer performance that is able to minimize overhead needed for equalization is acquired. In this paper, we introduce the new cost function to reduce the constellation of received signal at the input stage of a equalizer. It reduce the error at the steady equalization state. By the computer simulation, we confirmed that the proposed CR-CMA algorithm has the faster convergence speed and the smaller residual intersymbole interference than the conventional CMA.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.709-717
• /
• 2002

A new multi constant modulus algorithm (MCMA) for a blind decision feedback equalizer is proposed. In order to avoid the error propagation problem in the conventional DFE structure, Feed-Back Filter coefficients are updated only after Feed-Forward Filter coefficients are sufficiently converged to the steady state. Therefore, it has the problem of slow convergence speed characteristics. To overcome this drawback, the proposed MCMA algorithm uses not only new cost function considering the minimum distance between the received signal and the representative value containing the statistical characteristics of the transmitted signal, but also adaptive step-size according to the equalizer outputs to fast convergence speed of FBF. Simulations were carried out under the certified communication channel environment to evaluate a performance of the proposed equalizer. The simulation results show that the proposed equalizer has an improved convergence and SER performance compared with previous methods. The proposed techniques offer the possibility of practical equalization for cable modem and terrestrial HDTV broadcast (using 8-VSB or 64-QAM) applications.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.55-61
• /
• 2014

This paper related with the ECMA (Enchanced CMA) algorithm performance which is possible to simultaneously compensation of the amplitude and phase by appling the minimum disturbance techniques in the CMA adatpve equalizer. The ECMA can improving the gradient noise amplification problem, stability and roburstness performance by the minimum disturbance technique that is the minimization of the equalizer tap weight variation in the point of squared euclidiean norm and the decision directed mode, and then the now cost function were proposed in order to simultaneouly compensation of amplitude and phase of the received signal with the minimum increment of computational operations. The performance of ECMA algorithm was compared to present MCMA by the computer simulation. For proving the performance, the recovered signal constellation that is the output of equalizer output signal and the residual isi and Maximum Distortion charateristic and MSE learning curve that are presents the convergence performance in the equalizer and the overall frequency transfer function of channel and equalizer were used. As a result of computer simulation, the ECMA has more better compensation capability of amplitude and phase in the recovered constellation, and the convergence time of adaptive equalization has improved compared to the MCMA.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.28-33
• /
• 2008

This paper presents a continuous-time equalizer adopting a clock loss tracking technique for digital display interface. This technique uses bottom hold circuit to detect the incoming clock loss. The generated loss signal is directly fed to equalizer filters, building adaptive feed-forward loops which contribute the stability of the system. The design was done in $0.18{\mu}m$ CMOS technology. Experimental results summarize that eye-width of minimum 0.7UI is achieved until -33dB channel loss at 1.65Gbps. The average power consumption of the equalizer is a maximum 10mW, a very low value in comparison to those of previous researches, and the effective area is $0.127mm^2$.

• Journal of Navigation and Port Research
• /
• v.36 no.3
• /
• pp.169-173
• /
• 2012

In this paper, we propose an equalizer to minimize the inter-symbol interference when PSSK(Phase Silence Shift Keying) technique is applied to the low power underwater acoustic communication. PSSK is a QPSK(Quadrature Phase Shift Keying) modulation combined with PPM(Pulse Position Modulation), and it was proposed for low power communication. However, it has poor performance due to delay spread of underwater channel. In this paper, we propose a decision feedback equalizer to minimize the error in PSSK receiver. The sea trial was performed to evaluate the performance of the proposed method. In the result, the BER of PSSK was $4.36{\times}10^{-2}$ before the equalizer was applied, but the BER of PSSK was $3.95{\times}10^{-4}$ after the proposed equalizer was applied.