• 제목/요약/키워드: channel configuration

검색결과 379건 처리시간 0.023초

각도법과 동심형 확장 채널 연소기를 이용한 연소속도 측정 및 화염 발광 특성에 관한 연구 (A Study on the Laminar Burning Velocity Using an Angle Method and Annular Diverging Channel Combustor and Characteristics Of Chemiluminescence)

  • 윤승호;이기만
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.91-94
    • /
    • 2014
  • In this study, the laminar burning velocities of SNG fuel were studied using both experimental measurements and kinetic simulations. They were measured using the angle method of Bunsen flame configuration and the annular diverging channel combustor. And they were also numerically calculated by CHEMKIN Package with GRI 3.0 mechanisms. Spectrometer was used for characteristics of flame chemiluminescence of SNG fuels. From results of this work, first, we found that according to adding $H_2$ contents in the fuels the laminar burning velocities of SNG fuels were increased. And second, we also discovered existence of OH*, CH*, $C_2*$, HCO*, $CH_2*$ radicals and their correlation.

  • PDF

G.652, G.653, G.655 광섬유에 대해 측정된 FWM 및 XPM 효율의 채널간격에 대한 의존성 (Dependence of XPM and FWM efficiencies on channel spacing for G.652, G.653, G.655 optical fibers)

  • 김근영;이용기
    • 한국광학회지
    • /
    • 제14권1호
    • /
    • pp.17-22
    • /
    • 2003
  • 본 논문은 다양한 분산값을 갖는 G.652. G.653, G.655(I),(II),(III) 광섬유에 대해 채널간격에 따른 FWM 효율을 측정하고 그 결과를 해석적으로 얻은 값과 비교 분석하였다. 또한 pump-probe 실험 구성을 사용하여 각 광섬유에 있어서 XPM 효율을 측정함으로써 색분산과 채널 간격이 XPM에 미치는 영향을 분석하였다.

혼합 개선을 위한 Y-채널 마이크로 믹서의 최적설계 (Optimum Design of a Y-channel Microcmixer for Enhanced Mixing)

  • 신용수;최형일;이동호;이도형
    • 대한기계학회논문집A
    • /
    • 제30권3호
    • /
    • pp.302-309
    • /
    • 2006
  • Effective mixing plays a crucial role in microfluidics for biochemical applications. Owing to the small device scale and its entailing the low Reynolds number, the mixing in microchannels proceeds very slowly. In this work, we optimize the configuration of obstacles in the Y-channel mixer in order to attain maximum mixing efficiency. Before the optimum design, mixing characteristics are investigated using unstructured grid CFD method. Then, the analysis method is employed to construct the approximate analysis model to be used in the optimization procedure. The main optimization tool in the present work is sequential quadratic programming method. Using this approximate optimization procedure, we may obtain the optimum layout of obstacles in the Y-channel mixer in an efficient manner, which gives the maximum mixing efficiency.

128 채널 심장전기도 전치 증폭기의 설계 (The Design of 128 Channels Cardiac-Activation Pre-Amplifier)

  • 유선국;장병철;정동일;한영오
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제50권11호
    • /
    • pp.550-556
    • /
    • 2001
  • The computerized cardiac analysis system, which acquires and analyzes the electrical activation signal propagating along the surface of the heart, is indispensible equipment for the open heart surgery and electrical cardiac study. In this paper, the design requirement and the electrical circuit analysis are performed to construct the multi-channel cardiac activation pre-amplifier necessary for a signal conditioning circuit. The general 64 channel configuration is expanded into 128 channels to enhance the spatial resolution on the mapped surface of the heart. The 128 channels pre-amplifier consists of input circuit, differential amplifier, right leg driven circuit and isolation part. It has distinct features; high voltage protection, leakage current limitation, isolation and the maximization of common mode rejection ratio with respect to the half-cell potential difference due to different electrode materials. The final pre-amplifier circuit is assembled with 8 boards, each of which composing of 16 channels.

  • PDF

다채널 대용량 충방전기 모듈 개발에 대한 연구 (A Study on the Multi-Channel Large Capacity Charge/Discharge Formation Module)

  • 이준하
    • 반도체디스플레이기술학회지
    • /
    • 제15권2호
    • /
    • pp.55-60
    • /
    • 2016
  • This study was developed through the secondary battery module charging/discharger possible utilization in the production process equipment circuit. The developed module is ensuring construction of efficient and productive charging and discharger through this research a limit on the yield and the price of existing single -channel charge and discharger circuit as a 5V 70A grade secondary battery Formation charge and discharger for up to 1 board 4 channels. In order to improve the sensing accuracy, through a robust differential amplifier circuit described using 16bit Analog-Digital Converter and noise was secured 16bit resolution sensing. The configuration also made demands for property Rise / Fall Time. Data Acquisition, discharge efficiency and also to fit the sink circuit temperature level for mass production.

다중 채널 심장전기도 주 증폭기를 위한 필터 설계 (The design of filters for multi-channel cardiac activation main amplifier)

  • 한영오
    • 한국전자통신학회논문지
    • /
    • 제5권2호
    • /
    • pp.180-184
    • /
    • 2010
  • 본 논문에서는 다중 채널 심장 전기도 주 증폭기의 중요한 부분인 필터를 설계하고 시뮬레이션을 통하여 성능을 분석하였다. 주 증폭기는 샘플/홀더, 가변 고역통과 필터, 노치 필터, 가변 저역통과 필터로 구성된다. 필터는 기존의 64 채널의 공간 분해능을 향상시키기 위하여 128채널을 고려하여 설계되었다.

파노라믹 스캔 라이다용 1-Gb/s 리드아웃 증폭기 어레이 (1-Gb/s Readout Amplifier Array for Panoramic Scan LADAR Systems)

  • 김다영;박성민
    • 전기학회논문지
    • /
    • 제65권3호
    • /
    • pp.452-456
    • /
    • 2016
  • In this paper, a dual-channel readout amplifier array is realized in a standard $0.18{\mu}m$ CMOS technology for the applications of panoramic scan LADAR systems. Each channel consists of a PIN photodiode with 0.9 A/W responsivity and a 1.0 Gb/s readout amplifier(ROA). The proposed ROA shares the basic configuration of the previously reported feedforward TIA, except that it exploits a replica input to exclude a low pass filter(LPF), thus reducing chip area and improving integration level, and to efficiently reject common-mode noises. Measured results demonstrate that each channel achieves $70dB{\Omega}$ transimpedance gain, 829 MHz bandwidth, -22 dBm sensitivity for $10^{-9}BER$, -34 dB crosstalk between adjacent channels, and 45 mW power dissipation from a single 1.8 V supply.

A Link Layer Design for DisplayPort Interface

  • Jin, Hyun-Bae;Yoon, Kwang-Hee;Kim, Tae-Ho;Jang, Ji-Hoon;Song, Byung-Cheol;Kang, Jin-Ku
    • 전기전자학회논문지
    • /
    • 제14권4호
    • /
    • pp.297-304
    • /
    • 2010
  • This paper presents a link layer design of DisplayPort interface with a state machine based on packet processing. The DisplayPort link layer provides isochronous video/audio transport service, link service, and device service. The merged video, audio main link, and AUX channel controller are implemented with 7,648 LUTs(Loop Up Tables), 6020 register, and 821,760 of block memory bits synthesized using a FPGA board and it operates at 203.32MHz.

Performance Enhancement of IEEE 802.15.3 MAC for Simultaneously Operating Piconets

  • 설붕;공붕;김덕경
    • 한국통신학회논문지
    • /
    • 제32권1A호
    • /
    • pp.34-43
    • /
    • 2007
  • In the IEEE 802.15.3 Medium Access Control (MAC) protocol, Simultaneously Operating Piconets (SOPs) are linked by the parent/child (P/C) or parent/neighbor (P/N) configuration, which work on a Time Division Multiple Access (TDMA) basis. This provides interference mitigation but the overall throughput is limited because the SOPs share the channel time exclusively. The protocol is not efficient for SOPs if we focus on the combination of interference mitigation and high throughput maintenance. In this paper Public Channel Time Allocation (Public CTA) is proposed, which is able to greatly reduce the inter-piconet interference (IPI) and achieve greater throughput without much loss of link success probability (LSP) in the SOPs. The simulation results based on the SOPs of Direct Sequence Ultra Wideband (DS-UWB) system demonstrate that the proposed scheme effectively supports the coexistence of SOPs, and it can not only significantly improve the overall throughput of SOPs but also maintain high LSP.