• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.3 s.94
• /
• pp.277-285
• /
• 2005

In this paper, we propose the occupied bandwidth(OBW) measurement method for effectively measuring the 99 $\%$ OBW at monitoring station. In order to validate the measurement results obtained from the proposed measurement method, the modified adjacent channel power ratio(MACPR) is herein defined as the formula which was suitable for applying to the OBW measurement of 8-VSB DTV signals. It has been found that the MACPR is a good measurement parameter applicable for the proper site selection of monitoring station and the effective OBW measurement of 8-VSB DTV signals should be made for MACPR$\geq$35 dB with 600 measurement trials. The proposed measurement procedure is herein given and proven to effectively be applicable to the OBW measurement of terrestrial 8-VSB DTV signals on the air.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.10-17
• /
• 2015

A satellite communication system is one of viable solutions for Internet applications running in wide areas. However, the performance of TCP can be seriously degraded in the satellite networks due to long round-trip time (RTT) and high bit error rate (BER) over satellite links. Therefore, a performance enhancing proxy(PEP) based TCP splitting connection scheme is used in the satellite link to improve the TCP performance. In this paper, we implement PEP testbed and conduct experiment to evaluate the performance of TCP splitting connection by comparing with high-speed TCP solutions in various environments. In our experimental environment, we consider multiple connections, high packet loss, and limited bandwidth. The experiment results show that PEP improves the TCP throughput than high-speed TCP variants in various environments. However, there is no improvement of the TCP throughput with the limited bandwidth because there is packet loss caused by both the congestion and the channel error.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.188-195
• /
• 2004

We have analyzed the performance of TCP in the CDMA mobile communications systems with the adaptive modulation and coding(AMC). The wireless channel using AMC is characterized with not high error rate but highly varying bandwidth. Due to time-varying bandwidth, timeout events of TCP occurs more frequently, which leads to the throughput degradation. The analysis model is composed of the two parts. In the first part, we divide TCP packet stream into ‘packet groups’and derive the probability distribution of the wireless transmission time of each Packet group that reflects the time varying characteristics of AMC. In the second part, we formulate embedded Markov chain by making use of the results of the first part to model TCP timer mechanism and wireless transmission. Since our system model is characterized by the forward link high speed data transmission using AMC, the results reported in this paper can be used as a guideline for the design and operation of HSDPA, 1xEV-DO, and 1xEV-DV.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.29-37
• /
• 2008

To transmit video bit stream over low bandwidth such as wireless channel, high compression algorithm like H.264 codec is exploited. In transmitting high compressed video bit-stream over low bandwidth, packet loss causes severe degradation in image quality. In this paper, a new algorithm for recovery of missing or erroneous motion vector is proposed. Considering that the missing or erroneous motion vectors in blocks are closely correlated with those of neighboring blocks. Motion vector of neighboring blocks are clustered according to average linkage algorithm clustering and a representative value for each cluster is determined to obtain the candidate motion vector sets. As a result, simulation results show that the proposed method dramatically improves processing time compared to existing H.264/AVC. Also the proposed method is similar to existing H.264/AVC in terms of visual quality.

• Journal of Broadcast Engineering
• /
• v.15 no.4
• /
• pp.555-562
• /
• 2010

After starting digital terrestrial broadcasting, there have been a number oftrials to provide new services like data broadcasting on a spare bandwidth of a DTV channel. Recently, the Push-VOD service, which provides A/V contents on that bandwidth, gets more attention and is being standardized as NRT(Non-Real-Time) by ATSC. However, it is highly probable that the contents transmitted in this way contain many errors due to the DTV receiving environment. Thus, in order to improve the reliability of transmission, the contents should be transmitted repeatedly several times, considering the unidirectional property of DTV terrestrial network. In this paper, we propose a method to calculate the optimal number of repetitions to transmit each contents in a way that minimizes the number of errors occured, when trying to transmit several contents to the receiver in a restricted time, using Markov-chain modeling and dynamic programming approach.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.12
• /
• pp.15-22
• /
• 2011

Integrated-optic symmetric/asymmetric Mach-Zehnder interferometers at $1.3{\mu}m$ wavelength were studied as sensing part for electric-field measurement system. The devices were simulated based on the BPM software and fabricated utilizing Ti-diffused $LiNbO_3$ channel optical waveguides and lumped-type electrodes. A half-wave voltage of $V_{\pi}$=6.6V and modulation depth of 100% and 75% for a symmetric structure were measured for 200Hz and 1kHz electrical signal bandwidth, respectively. By the way, almost half-maximum power transmission was observed for asymmetric interferometers with ${\pi}$/2 intrinsic phase difference. Expected experimental measurements were observed for 1kHz electrical signal bandwidth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.1-12
• /
• 1997

The acousto-optical spectrometer as a new type backend of the receiver system for radio astronomical observations is manufactured for radio signal analysis. We studied on the effect of Acousto-Optic and Acousto-Optic devices and designed the optics system. We manufactured the optical mount and the CCD detector for deflected beam and interface card. This acousto-optical spectrometer consisted of a laser, optics, acousto-optic deflector, CCD detector and Interface card. This system use He-Ne laser as a light source and use optics to get parallel beam and to focus the deflected beam. Acousto-optic deflector converts IF signal to ultrasonic wave and deflect the laser beam according to the Bragg deflection. The ultra wide band acousto-optic deflector has 1 GHz bandwidth and a total of 2,048 channel Charge Coupled Device for signal detection. In this study, we discuss the theoretical description on the effect of Acousto-optics, the design of the optics, manufacture of optical mount, CCD detector, interface card and we presented the results of experiment. As a result of measurement, we have 1,000 channels bandwidth from CCD channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.2
• /
• pp.168-180
• /
• 1992

Commumication technology has been continuously developed to overcome the distance and time for the transmission of information to the human society. Wireless mobile communication, which had been used mostly in the military and police is widely used these days for enterprise and individuals. Therefore the domestic usage of the advanced mobile phone service are progressively gaining wide popularity. The modulation techniques used usually in mobile communications were the analog techniques such as AM and FM, but they are getting replaced by the digital techniques, However, the major disadvantage of the digital communications is the increase of the transmission bandwidth. Therefore, it is very important to use efficiently the limited frequency bandwidth. The domestic research and development on the subject seems quite limited and in order to establish the technology of the digital mobile communications. This thesis presents the design of the frequency hopping synthesizer providing 124 channels with a channel spcing of 200KHz. VCD used in the synthesizer employs a semi-rigid cable for higher purity of signal spectrum, and a hybrid pgase detector is realized with a sample hold phase detector in conjuction with a tri-state phase detedctor.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.189-197
• /
• 2008

ENS-2 simulator is the most widely-used simulator in the research of wired/wireless communication. Since an IEEE 802.11 module has been implemented in NS-2. much research using this module has been done for various MAC layer functions. The most important problem in terms of performance is the hidden terminal problem. To solve this problem, the solutions using a busy-tone such as BTMA, DBTMA, etc. have been proposed. In order to be able to use a busy-tone, channels using the frequency bandwidth except the frequency bandwidth of the data channel is required for the collision prevention, and a MAC layer has to be able to menage such multiple channels. In this research, we implement a module that can use a busy-tone in NS-2, implement a modified RI-BTMA by applying the implemented module, and verify its performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1113-1119
• /
• 2006

For a multi-user OFDM system in mobile channels which requires low-complexity in adaptive resource allocations, resource allocation algorithm using multi-threshold is proposed. The allocation scheme, which is performed by the multi-threshold values in descending order, considers only subcarriers over each threshold level. Moreover, some subcarriers with the lowest channel gain can be· removed in the present threshold level within the constraint of satisfaction of the required data rate, in order to allocate them to the other users when the allocation process of next threshold is executed. As a result, the proposed bandwidth and subcarrier algorithm has better system performances than the conventional allocation schemes in terms of required power and processing time, which is expected as a technique that improves the spectral efficiency of OFDM systems in a mobile environment.