• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.612-619
• /
• 2014

This paper proposes a real-time multi-camera video surveillance system with automatic resolution control using motion detection. In ordinary times, it acquires 4 channels of QVGA images, and it merges them into single VGA image and transmit it. When motion is detected, it automatically increases the resolution of motion-occurring channel to VGA and decreases those of 3 other channels to QQVGA, and then these images are overlaid and transmitted. Thus, it can magnifies and watches the motion-occurring channel while maintaining transmission bandwidth and monitoring all other channels. When it is synthesized with 0.18 um technology, the maximum operating frequency is 110 MHz, which can theoretically support 4 HD cameras.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.197-206
• /
• 1997

The purpose of this paper is to propose an improvement method of BER for coded 16QAM over Rayleigh fading channel. To overcome the BER degradation due to the fading under mobile communication, we apply trellis coded modulation technique which is efficient to get a coding gain without the expansion of bandwidth. Especially, to minimize the burst error which are the main factor of the BER degradation for mobile communication systems, we apply interleaving/deinterleaving method to the studying system. Also we apply asymmetric signal mapping methods to this TCM scheme. From the computer simulation, BER performance of asymmetric case has achieved about 1 dB improvement of about $10^{-4}$, compared to the traditional symmetric case.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.3
• /
• pp.22-35
• /
• 1994

To improve the bandwidth efficiency in the environment of digital mobile communications, a correlative coded FM system is designed. The signal of this system has continuous phase and high power efficiency due to the constant envelope. But this signal also has a little loss of the SNR and some degradation of the BER. In this paper, a modified MLSE method which uses correlative coded signal is adopted to improve the performance of the receiver. The MLSE method improved the BER performance in the used channel. Without the decision feedback, the receiver performance was improved by 2dB and with it, by 4dB Particularly, the MLSE method and the decision feedback showed better performance in bad channels than in a stable telephone channel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2405-2410
• /
• 2012

The 4th generation mobile communication system, LTE, does not support an additional core network to provide voice service, and it is merged into a packet network based on all IP. Although Voice service over LTE can be supported by VoIP, it will be provided by the existing 3G networks because of the discontinuity of LTE coverage. However, it is inevitable to adopt VoIP over LTE to provide high quality voice service. In this paper, we investigate the capacity of VoIP over LTE. Our results indicate that spectral efficiency can be significantly improved as channel bandwidth increases in terms of VoLTE capacity. In addition, we can achieve higher VoLTE capacity without decreasing control channel capacity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2173-2183
• /
• 1998

We consider a frequency-hopped multiple-access communication system that employs reed-solomon code over GF(Q) and M-ary FSK signaling ($M{\leq}Q$) in rayleigh fading channel. We investigate the tradeoff among the modulation symbol size (M), the number of frequency slots, and the code rate in maximizing the average number of successfully transmitted information bits per unit time and unit bandwidth (called normalized throughput). We find that it is desirabel to use a large M in noise-limited environment. In interference-limited environment, it is more improtant to prevent errors (hits) by increasing the number of frequency slots than to correct them with formward error correction techniques or to reduce the error rate by increasing M.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.855-865
• /
• 1999

This paper presents the improvement of BER performance using fading compensation method for 16 QAM-TCM to reduce the effects of multi-path fading in mobile radio environments. We propose the multi-pilot symbol aided fading compensation technique using Gausian interpolation method for inter-symbol interference or fading distortion occured in frequency selective fading channel. The proposed system is combined coding and modulation scheme for improving the reliability of a digital transmission system without increasing the transmitted power or the required bandwidth. In the fading compensation, the pilot symbols from a known sequence is multiplexed into the data symbols at regular intervals to from a frames for transmission. And we use a modified bit reversal block interleaver to randomize burst errors. The results show that significant improvements in the bit-error rate performances can be achieved by the proposed techniques.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.158-165
• /
• 2000

In this paper, the transmission channels of L-band and Ka-band multi-media satellite communication systems for the land mobile satellite(LMS) communication service are modeled. Trellis coded(TC) 8PSK is proposed as a power and bandwidth efficient digital transmission scheme for the LMS system, and its error probability performance is analyzed. Block interleaving and deinterleaving are applied to the transmitter and receiver of LMS system respectively in order to compensate for the BER performance degradation of TC-8PSK caused by multipath fading. Viterbi equalizer is also employed in the receiver for channel equalization, and the corresponding BER performance improvement is analyzed.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.3
• /
• pp.19-25
• /
• 2000

In this paper, we describe RF receiver module for IMT-2000 handset with 5 MHz channel bandwidth. The fabricated RF receiver module consists of Low Noise Amplifier, RF SAW filter, Down-converter, If SAW filter, AGC and PLL Synthesizer. The NF and IIP3 of LNA is 0.8 dB, 3 dBm at 2.14 GHz, conversion gain of down-converter is 10 dB, dynamic range of AGC is 80 dB, and phase noise of PLL is -100 dBc at 100 kHz. The receiver sensitivity is -110 dBm, adjacent channel selectivity is 48 dBm.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.195-201
• /
• 2006

In multicarrier code division multiple access(MC-CDMA), the total system bandwidth is divided into a number of sub-bands, where each subband may use direct-sequence(DS) spreading and each subband signal is transmitted using a subcarrier frequency. In this paper, the system performance analysis of MC-CDMA using to gain combining(EGC) and maximal ratio combining(MRC) method over frequency selective Nakagami-m fading channel is analyzed. In the proposed system, a data sequence is serial-to-parallel converted, and MC-CDMA is used on each of the parallel data streams. The data streams are spread at both the symbol fraction level and at the chip level by the transmitter. In this paper, the compare to analysis,two standard diversity combining techniques, EGC and MRC, The good performance of system using to MRC more than EGC

• ETRI Journal
• /
• v.24 no.2
• /
• pp.81-96
• /
• 2002

This paper describes our design of a hybrid amplifier composed of a distributed Raman amplifier and erbium-doped fiber amplifiers for C- and L-bands. We characterize the distributed Raman amplifier by numerical simulation based on the experimentally measured Raman gain coefficient of an ordinary single mode fiber transmission line. In single channel amplification, the crosstalk caused by double Rayleigh scattering was independent of signal input power and simply given as a function of the Raman gain. The double Rayleigh scattering induced power penalty was less than 0.1 dB after 1000 km if the on-off Raman gain was below 21 dB. For multiple channel amplification, using commercially available pump laser diodes and fiber components, we determined and optimized the conditions of three-wavelength Raman pumping for an amplification bandwidth of 32 nm for C-band and 34 nm for L-band. After analyzing the conventional erbium-doped fiber amplifier analysis in C-band, we estimated the performance of the hybrid amplifier for long haul optical transmission. Compared with erbium-doped fiber amplifiers, the optical signal-to-noise ratio was calculated to be higher by more than 3 dB in the optical link using the designed hybrid amplifier.