• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.959-961
• /
• 2003

In this paper, we describe implemented DMAC (Direct Memory Access Controller) architecture on Altera's $Excalibur^{TM}$ that includes industry-standard $ARM922T^{TM}$ 32-bit RISC processor core operating at 200 MHz. We implemented DMAC based on AMBA (Advanced Micro-controller Bus Architecture) AHB (Advanced Micro-performance Bus) interface. Implemented DMAC has 8-channel and can extend supportable channel count according to user application. We used round-robin method for priority selection. Implemented DMAC supports data transfer between Memory-to-Memory, Memory-to-Peripheral and Peripheral-to-Memory. The max transfer count is 1024 per a time and it can support byte, half-word and word transfer according to AHB protocol (HSIZE signals). We implemented with VHDL and functional verification using $ModelSim^{TM}$. Then, we synthesized using $LeonardoSpectrum^{TM}$ with Altera $Excalibur^{TM}$ library. We did FPGA P&R and targeting using $Quartus^{TM}$. We can use implemented DMAC module at any system that needs high speed and broad bandwidth data transfers.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.49-52
• /
• 2003

OFDM(Orthogonal Frequency Division Multiplexing) scheme can compensate for distortions caused by multipath delay spread and reduce the burst errors caused by the Doppler effect since OFDM signals have long symbol durations. However, OFDM is required to be improved for high speed data transmission and large capacity. Therefore, coding schemes should be combined with OFDM. In this paper, it was studied that the performance of OFDM transmission scheme was improved in mobile communication channel by applying TCM, which has advantages of error correction and bandwidth efficiency. Simulation was carried out for two TCM models with different code efficient length. By mapping two models to square 16QAM, the model with the code efficient length of 2 achieved 3dB better than the other for the BER of 10/sub -3/. In conclusion, if we want to achieve a better performance with TCNA in OFDM applications, we should select a TCM with larger code efficient length.

• Journal of Korea Multimedia Society
• /
• v.12 no.9
• /
• pp.1201-1209
• /
• 2009

Recently, the convergence of the telecommunications industry through the development of network media has brought along interactive data services in addition to the traditional broadcast services by providing direct connections between the users and the broadcasters. This can be easily achieved by the combination of existing network technology and multimedia technology, but in reality, as seen in the actual implementation of IPVT, it's difficult to provide satisfactory levels of service to users due to issues of network bandwidth and problems of streaming system. In particular, a network which is able to fully support Qos/QoE, and also a fast enough channel changing technology that is satisfactory to the user, are prerequisites for IPTV success. Therefore this thesis proposes a fast channel changing technique to delivery enhanced IPTV user experience. Recent IP set-top-boxes use only a small portion of the CPU to feed Ethernet packets to the hardware decoder and play them. Thus, by making IP set-top-boxes share cached channel information and content with each other, reducing the load on the server and enhancing the channel changing time is made possible.

• Journal of KIISE:Information Networking
• /
• v.37 no.4
• /
• pp.301-306
• /
• 2010

We propose the control channel access scheme for multi-interface multi-hop cognitive radio (CR) environment having a cluster structure. Due to the difficulty of obtaining common channels across the entire CR network, most multi-interface multi-hop CR networks put the control channel outside the CR bandwidth and dedicate one network interface to it in order to exchange the control information such as the activation of licensed users. However, this will be the waste of the network interface. Our focus is how to alternate between the control and the data channel without multichannel hidden node problem under the cluster structure where CR nodes connect with neighbors through multiple data channels. By using simulation, we evaluate the performance of the proposed scheme. The results show that the proposed scheme achieves higher network throughput than the dedicated scheme where one network interface card should dedicate to the control channel and cannot be used for data transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.723-731
• /
• 2016

A core technological base to provide enhanced data rates required by 5G mobile wireless communications is the improved bandwidth efficiency using massive multiple-input multiple-output (MIMO) transmission. MIMO transmission requires the channel estimation using the channel state information reference signaling (CSI-RS) and appropriate beamforming, thus the design of the codebook defining proper beamforming vectors is an important issue. In this paper, we propose a multi-rank codebook based on the discrete Fourier transform (DFT) matrix, by utilizing statistical properties of the channel generated by the spatial channel model (SCM). The proposed method includes a structural change of the precoding matrix indicator (PMI) by considering the phase difference distributions between adjacent antenna elements, as well as the selected codevector characteristics of each transmission layer. Performance gain of the proposed method is evaluated and verified by making the performance comparison to the 3GPP standard codebooks adopted by Long-Term Evolution (LTE) systems.

• Journal of KIISE:Information Networking
• /
• v.37 no.3
• /
• pp.249-253
• /
• 2010

Resource of wireless frequency bandwidth is gradually going to be deficient due to explosive increase of traffic and saturated non-licensed frequency band such as ISM. In the contrary, many licensed frequency bands are revealed to be low in utilization by several measurement based researches. To alleviate this inefficiency, a concept of cognitive radio is suggested. Cognitive radio lets non-licensed user exploit the licensed frequency band as long as non-licensed user does not interfere licensed user and as a result, it is possible to harness wireless frequency more efficiently. IEEE 802.22 is the first standard network with cognitive radio technology and it employs Two-Stage channel sensing mechanism to accomplish both enough licensed user protection and efficient channel utilization. In this paper, we analyze the overhead of Two-Stage channel sensing mechanism and identify the influence of channel sensing time to the overhead.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.79-87
• /
• 2013

A new modulation technique - correlative encoded FSK (CEFSK) - for use in power and bandwidth limited digital communication system is proposed. CEFSK is free of ISI and generates output signals which have a smooth and continuous phase transition and a reduced envelope fluctuation by keeping correlation between amplitude and phases of two subsequent symbols. In comparison to conventional one-bit differential detected (1DD) GFSK, the performance of the 1DD-CEFSK in a non-linearly amplified (NLA) channel impaired by additive white Gaussian noise (AWGN), ISI and IM, is analyzed via computer simulation. The simulation result shows that, in an NLA single-channel, 1DD-CEFSK provides a signal-to-noise ratio (SNR) advantage of up to 1.2dB and 0.8dB at BER of $1{\times}10^{-4}$ when input back-off (IBO) of HPA is -1.0dB and -3.0dB, respectively. For the same channel environment with multi-channel, 1DD-CEFSK outperforms 1DD-GFSK by 1.1dB in SNR, regardless of the value of IBO.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.8-18
• /
• 2009

CableLAB published DOCSIS 3.0 Specifications to supply broadband access to homes and small businesses. The primary technique of DOCSIS 3.0 Specification is channel bonding which provides cable operators with a flexible way to significantly increase up/downstream speeds. In this paper, we propose the upstream scheduler that serves channel bonding. Proposed scheduler consists of two sub-scheduler: bonding group scheduler and channel scheduler. Also, we propose three scheduling algorithms to allocate request bandwidth of CM to each bonding channel: equivalent scheduling algorithm, current request-based scheduling algorithm, and last grant-based scheduling algorithm. In order to evaluate the performance of these algorithms and DOCSIS 3.0 MAC protocol, we develop the DOCSIS 3.0 simulator with the network simulator, OPNET, to model DOCSIS network, CMTS, and CM. Our results show that equivalent scheduling algorithm is superior to others in the view of transmission delay and throughput and DOCSIS 3.0 protocol provides higher throughput than pre-DOCSIS 3.0 protocol.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.288-295
• /
• 2007

In this paper, we proposed two systems, STTC scheme and STBC-TCM scheme, to enhance the reliability of HDR-WPAN system and analyzed BER(bit error rate) performance of the proposed systems over the slow fading channel. The proposed systems had a diversity gain and coding gain without increasing an additional channel bandwidth. However, in terms of reliability, about 4dB improvement at BER=$10^{-4}$ was obtained by the STBC-TCM scheme. In addition, HDR-WPAN system with STBC-TCM scheme had a linear rise in system complexity of ML(maximum likelihood). From the results, STBC-TCM scheme was more appropriate to improve the reliability and channel efficiency and to reduce complexity of HDR-WPAN system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.219-222
• /
• 2004

There are several factors that disturb an Ultra-Wideband (UWB) radio propagation in an indoor environment such as path loss, shadowing and multipath fading. These factors directly affect the quality of the received signal. In this paper, we investigated the influence of the human body shadowing on UWB propagation based on measured wireless channel in an anechoic chamber. The characteristics of the UWB channel including the transmitter and the receiver antenna effects are acquired over the frequency bandwidth of 3${\sim}$11 GHz. The major factors such as the power delay profile (PDP), the angular power distribution (APD), the pulse distortion and the RMS delay spread caused by the human body shadowing are presented.