• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.43-54
• /
• 2003

Due to insufficient available bandwidth resources and the continuously growing demand for cellular communication services, the channel assignment problem has become increasingly important. To trace the optimal assignment, several heuristic strategies have been proposed. So far, most of them focus on the small-scale systems containing no more than 25 cells and they use an anachronistic cost model, which does not satisfy the requirements ity. Solving the small-scale channel assignment problems could not be applied into existing large scale cellular networks' practice. This article proposes a decomposition approach to solve the fixed channel assignment problem (FCAP) for large-scale cellular networks through partitioning the whole cellular network into several smaller sub-networks and then designing a sequential branch-and-bound algorithm that is made to solve the FCAP for them sequentially. The key issue of partition is to minimize the dependences of the sub-networks so that the proposed heuristics for solving smaller problems will suffer fewer constraints in searching for better assignments. The proposed algorithms perform well based on experimental results and they were applied to the Taiwan Cellular Cooperation (TCC) in ChungLi city to find better assignments for its network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.519-529
• /
• 1993

A spectral and power efficient modulation technique, named Compact Superposed Quadrature Amplitude Modulation (Compact-SQAM), is introduced. The performance of Compact-SQAM system, in a Linearly and nonlinearly amplified single and multicarrier environment, in the presence of additive white Gaussian noise(AWGN), intersymbol interference(ISI), timing jitter and adjacent channel interference (ACI), is experimentally analyzed via computer simulation. Various channel conditions, such as channel spacing, between the main and adjacent channels and fade depth on the desired main channel, are examined. Our result shows that Compact-SQAM, and better P(e) performance that other modems using simple Butteroworth type postdetection receive filters. Especially, Compact-SQAM modem achieves higher efficiency of frequency utilization and better P(e) performance than other modems in the severly bandlimited nonlinear multicarrier channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.878-885
• /
• 2011

Due to reflect at surface of the water and limit bandwidth, it is difficult to design underwater acoustic communication systems with high-reliability and high transmission rate. Therefore the trends of underwater communication is transformed from single sensor to multiple sensor studies. However, underwater MIMO communication techniques have a high correlation value between multiple sensors on transmitters and receivers in underwater environments, it is difficult to expect space diversity gain on muli-path channels. Therefore, this paper proposed the MISO communications system with two transmit sensors and single receiver sensor, and analyzed its performance using the LDPC codes and channel compensation algorithm.

• The KIPS Transactions:PartC
• /
• v.13C no.4 s.107
• /
• pp.533-540
• /
• 2006

WDMB technology has merits of high bandwidth and high mobility. But WDMB also has uni-directional communication problem. This paper provides solution to supplements uni-directional communication problem of WDMB with embodying return channel using WWAN to offer high quality multimedia service to user. Also this paper proposes intelligent network interface selection algorithm using various network information and return channel type. As a result of simulation, our proposed scheme is better as compared with other handoff scheme in energy efficiency of $7{\sim}8%$ and about two time of handoff number of time decrease.

• Journal of Broadcast Engineering
• /
• v.19 no.6
• /
• pp.767-788
• /
• 2014

The worldwide transition from analog to digital broadcasting has now been completed and the need to study next generation standards for Ultra High Definition TV (UHDTV) broadcasting, and broadcasting & communication convergence systems is rapidly growing. In particular, high resolution mobile broadcasting services are needed to satisfy recent consumers. Therefore, the development of highly efficient convergence broadcasting systems that provide fixed/mobile broadcasting through a single channel is needed. In this paper, a service scenario and requirements for providing 4K UHD & HD convergence broadcasting services through a terrestrial single channel are analyzed by employing the latest transmission and A/V codec technologies. Optimized transmission parameters for 6 MHz & 8 MHz terrestrial bandwidths are drawn, and receiving performances are measured under Additive White Gaussian Noise (AWGN) and time-varying multipath channels. From the results, in a 6 MHz bandwidth, the reliable receiving of HD layer data can be achieved when the receiver velocity is maximum 140 Km/h and is not achieved when the velocity is over 140 Km/h due to the limit of bandwidth. When the bandwidth is extended to 8 MHz, the reliable receiving of both 4K UHD and HD layer data is achieved under a very fast fading multipath channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.2
• /
• pp.97-104
• /
• 2017

In this paper, we designed and fabricated the multi band Transceiver Assembly(TCA) for the Multi Channel Synthetic Aperture Radar(MCSAR) containing C-band, X-band, Ku-band and we researched to verify electrical performance of TCA. The transceiver consists of transmitters, receivers, signal selection modules for each band, and stability oscillator, frequency synthesizer, controller, power distributor. The transceiver has a receive path selection and bandwidth selection functions in accordance with the operating mode. And the transceiver can transmit and receive all three bands simultaneously, each band has a bandwidth of up to 300 MHz. Final transmission output of transceiver for each band is over 20 dBm to be suitable for driving the T/R module. Receiver bandwidth is selected according to the required function and receiver gain has approximately C-band 52 dB, X-band 50 dB, Ku-band 60 dB, the maximum noise figure of Ku-band V polarization is 4.28 dB in the whole band H, V polarization. As a result of the electrical performance test, a multi-band TCA is satisfied the property requirements of the MCSAR.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.7
• /
• pp.9-16
• /
• 2014

Since the haze removal algorithm using dark channel prior was introduced, many researches for improving processing speed have been addressed even if it presented impressive results. Remarkable one is using median dark channel prior. Although it has been considered as a very attactive method, processing speed is as low as ever. So, a parallel memory model which is suitable for SIMD architecture processing haze removal on high-definition images in high-speed is introduced in this paper. The proposed parallel memory model allows to access n pixels simultaneously. It is also support stride 3, 5, 7, and 11 in order to execute convolution mask operations, e.g., median filter. The proposed parallel memory model can therefore support enough data bandwidth to process the algorithm using median dark channel prior in high-speed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.676-684
• /
• 2008

In digital video broadcasting-terrestrial (DVB-T), which is the European digital terrestrial television standard, the orthogonal frequency division multiplexing (OFDM) has been adopted for signal transmission. The main reasons using OFDM are to increase the robustness against the frequency selective fading and impulse noise, and to use available bandwidth efficiently. However, channel variation within an OFDM symbol destroys orthogonality between subcarriers, resulting in inter-carrier interference (ICI), which increases an error floor in proportional to maximum Doppler spread. This paper provides an ICI analysis in both time and frequency domains while existing literatures analyze the ICI effects mainly in frequency domain and proposes the algorithms that estimate the channel impulse response and channel variation using least square (LS) algorithm which is the most simple channel estimation technique. And we propose adaptive channel estimation algorithm that estimates the velocity of terminals. The simulation results show that proposed algorithm has similar performance with about 1.5% computational complexity of noise and ICI reduction LS algorithm in low speed environments.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.8
• /
• pp.381-389
• /
• 2007

In this paper, the measuring method of underwater acoustic communication channel characteristics in the shallow water using the autocorrelation characteristic of PN sequence and the undorwater communication channel analysis results from the received signal sample data are described. For measuring the underwater acoustic communication channel characteristics, two PN sequences are used as a transmitted data of I-channel and Q-channel of QPSK symbol and QPSK signal is transmitted with symbol rate of 5 kHz and carrier frequency of 25 kHz. In the receiver the received signal, which pass through 675 m and 1492 m, is sampled and then stored. Using the stored sample data, the scattering function, coherent time, delay power profile, spaced-tone autocorrelation function, delay spread, and coherent bandwidth of each propagation distance cases are analyzed. Based on the analysis results, several guidelines are suggested for the design and implementation of underwater transmission system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.60-68
• /
• 2010

In case of sensorineural hearing loss, auditory perception can be activated by electrical stimulation of the nervous system via electrode implanted into the cochlea or auditory nerve. Since the tonotopic map of the human auditory nerve has not been definitively identified, the recording of auditory nerve signal with microelectrode is desirable for determining the tonotopic map. This paper proposes the multi-channel analog front-end for auditory nerve signal detection. A channel of the proposed analog front-end consists of an AC coupling circuit, a low-power 4th-order Gm-C LPF, and a single-slope ADC. The AC coupling circuit transfers only AC signal while it blocks DC signal level. Considering the bandwidth of the auditory signal, the Gm-C LPF is designed with OTAs adopting floating-gate technique. For the channel-parallel ADC structure, the single-slope ADC is used because it occupies the small silicon area. Experimental results shows that the AC coupling circuit and LPF have the bandwidth of 100 Hz - 6.95 kHz and the ADC has the effective resolution of 7.7 bits. The power consumption per a channel is $12\;{\mu}W$, the power supply is 3.0 V, and the core area is $2.6\;mm\;{\times}\;3.7\;mm$. The proposed analog front-end was fabricated in a 1-poly 4-metal $0.35-{\mu}m$ CMOS process.