• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2001년도 춘계 학술발표회 논문집
• /
• pp.11-14
• /
• 2001

Our study have aimed to identify the deformation and breakup mechanism of minor phase in polymer blends under uniaxial enlongational flow. Experimentally, we measured the transient elongational viscosity of PS/HDPE blends using the uniaxial elongational rheometer at two temperatures. And we observed the evolution of blend morphology with elongation time. Morphological change was observed by quenching the specimen after deformation. If the viscosity variation of PS was compared with that of HDPE at each temperature, PS showed larger temperature dependence than HDPE. At 155$^{\circ}C$, the dispersed phase of larger size were easily affected by affine deformation. The initial spherical shape changed to flat ellipsoid at first, then flat ellipsoid to bulbous shape, and bulbous to thin thread and its satellites. But dispersed phase of smaller size showed the change from sphere to ellipsoid. At 175$^{\circ}C$, the dispersed phase were mostly deformed from spherical shape to ellipsoid. As a result, the morphological change of dispersed phase in elongational deformation is affected by chain flexibility and viscosity ratio. We need to further study to make sure the mechanism of elongation of viscoelastic polymer blends.

• 복식
• /
• 제58권5호
• /
• pp.178-197
• /
• 2008

Due to the inflow of the western culture since the 19th century, female skirts and jackets have been changed considerably in detail though their basic composition was maintained. The analysis on female jackets from the start of the modern period to 1960s has been undertaken with artefacts as well as reports and research dissertations related to them. For period appraisal, analysis was divided into several periods which are from 1890s to 1910s, and every 10 years afterwards. As a result, aspects for the appraisal in each period was found. Aspects for period appraisal in modern jackets can be a change in total length and side length, a change in shape of the sleeves (from straight to round), a change in width, and a difference in closed shape of the collars. Material and color can be another aspect which shows fashionable material or new materials (man-made textile or nylon) of each period, color combination of surface and lining material as well as other parts of the jacket, use of a stiffener made with net or sheer textiles. Research using books and archives is important for the appraisal of the garment artifact. However, most of all, one should have the attitude of examining the artifacts frequently in order to achieve deeper understanding and an eye for accurate appraisal.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.371-372
• /
• 2006

This study was carried out to analyze the effect of wind load on the structural stability of a container crane according to the change of the boom shape using wind tunnel test and provide a container crane designer with data which can be used in a wind resistance design of a container crane assuming that a wind load 75m/s wind velocity is applied in a container crane. Data acquisition conditions for this experiment were established in accordance with the similarity. The scale of a container crane dimension, wind velocity and time were chosen as 1/200, 1/13.3 and 1/15. And this experiment was implemented in an Eiffel type atmospheric boundary layer wind tunnel with $11.52m^2$ cross-section area. Each directional drag and overturning moment coefficients of a container crane according to the change of the boom shape were investigated.

• 한국실내디자인학회논문집
• /
• 제20권1호
• /
• pp.14-23
• /
• 2011

The purpose of this study is to analyse the inclinations and expressions in contemporary architecture. Specially, we call this tendency and architectural movements as architectural metamorphosis. Metamorphosis in architecture present the core of the change of Forms and spirits in a change of outward shape and terrestrial identity. As in Ovid's extended dramatic poem of change and transformation, Metamorphoses, all Souls are deathless, and migrates from one form to another. Like these stories in Metamorphoses, Ovid tells the soul never dies, but leaps one form to anther, and can take any shape. So the architectural form, transformation and deformation in contemporary architecture means architectural sensations and cognitions can even approach the soul of form and shape under the transformation. The expressions and design strategies of metamorphosis in comtemporary architecture reveal continuous and sequential formations of space, linear structure with force and vector, rhythmical wavement and folding surface, lively wiggly flows of volumns and objects, and so on. Such qualities came from the periodical needs; separation of structure and surface, poly-surfacial movement, poly-sensual expression and experience, dematerialization and the dematerialized space, formless of non-formal architecture, digital architecture. Architecture of Metamorphosis is the ways and the needs of our period to overcome the static limits prohibits the liberal thoughts, to find the ways toward the opportunities and diversities and to unlock the imaginaire of the contemporary architecture.

• 한국의류학회지
• /
• 제40권3호
• /
• pp.526-538
• /
• 2016

Breast cancer surgery result in changes in clothing style due to changes in the size of the breast as well as body shape. This study provides basic data as a fashion therapy to improve the quality of life for breast cancer patients who have to change clothing habits after surgery. The regression results found that the most important factor are pain and the amount of breast loss for clothes style changes after breast cancer surgery. Breast cancer patients suffer pain relative to the proximity to the date of surgery and regardless of the breast cancer resection range. However, the changes in clothes style relates to the amount of pain and breast reduction range. The t-test results on the change of the clothing styles for before and after breast cancer surgery showed that women significantly prefer comfortable clothes with sleeves and consider a closure style on clothes to put on and take off instead of clothes that are tight-fitting, have thin fabric or deep neck lines. Painful breast cancer results in women who prefer closure style on clothes, front closure clothes and garments that hide body shape. However, the larger reduction range of breast cancer patients and those with painful breast cancer prefer garments that hide body shape and are looser size clothes with sleeves.

• 한국기계가공학회지
• /
• 제19권7호
• /
• pp.67-73
• /
• 2020

Shrinkage is inevitable in the curing of resins during the nanoimprint process. The degree of shrinkage that occurs as the resin transforms from a viscous liquid to solid differs depending on the type of resin. However, if the cured material is repeatedly cured using the same material, constant shrinkage can be confirmed. In this study, the pattern of change was observed by repeatedly performing the nanoimprint process using a resin with a constant shrinkage rate. The observed pattern for the change of shape was made using a triangular pyramid-shaped aluminum master mold and a flexible replica mold made from the master. Shrinkage that results from the nanoimprint process occurs linearly in the longitudinal direction of the pattern and can be predicted by simple calculations. The change of the pattern due to shrinkage occurred as expected. If the shrinkage rate remains constant, various patterns can be manufactured with high accuracy by correcting these changes before producing a specific shape. This study confirms that the pattern of the desired angle can be obtained by performing the repeated imprint without having to manufacture a master mold.

• 한국공간구조학회논문집
• /
• 제17권4호
• /
• pp.133-140
• /
• 2017

Recently, the interest in the smart buildings is increasing in the architecture field. Among them, a research of facade design using a transformable system that can adjust the effect of the external environment is in progress. One of a typical example of the deployable system is a Scissors system that can change shape by using the geometric conditions of a unit member. Scissors system is a high-tech structural system which can construct the deployable plan and curved space by using the SLE (Scissors-Like Element) consisted of two Bar and Pivot. If the facade is designed by applying Scissors system, it is possible to maximize the performance and aesthetic effect of the structure by using a shape change of the line member. This paper presents a study of deployable facade design applying hybrid-typed Scissors system. A new deployable pattern of facade design is developed by combining Angulated Scissors system and tessellation pattern. Applying the deployable pattern a double skin construction method which is to add an outer wall for design, it raises three dimensional effects and can maximize the artistic essence of the change in shape upon deployment.

• 한국생활과학회지
• /
• 제13권6호
• /
• pp.959-966
• /
• 2004

The purpose of this research is to analyze the shape of gathered skirts made by different gatherings. The shape of gathered skirts is affected by the amount of the gatherings that control fullness along a waistline seam. The gap also has an effect on the shape. We made a few experiments to make gathered skirts in different gathering conditions. The conditions include two types of ratio of gathers, which were given the total amount of gathering, and two types of spread of gathers, which were calculated for waist and hip. Experiments were conducted to figure out the dressed shape through 3-D measurement Exyma- WBS, and also to investigate the proportion, area distribution, and gap of the shape of gathered skirts on the horizontal section map with Rapid Form 2004 SP3, a software for 3-D shape analysis. As the results show, there were differences among the proportion, area distribution, and gap of the dressed shape. It showed that the shape on the horizontal section map was different because the shape between waist and hip per parts on body was not the same.

• Journal of Korean Neurosurgical Society
• /
• 제38권4호
• /
• pp.255-258
• /
• 2005

Objective : Lumbar lordotic curve on L4 to S1 level is important in maintaining spinal sagittal alignment. Although there has been no definite report in lordotic value, loss of lumbar lordotic curve may lead to pathologic change especially in degenerative lumbar disease. This study examines the changes of lumbar lordotic curve after posterior lumbar interbody fusion with wedge shape cage. Methods : We studied 45patients who had undergone posterior lumbar interbody fusion with wedge shape cage and screw fixation due to degenerative lumbar disease. Preoperative and postoperative lateral radiographs were taken and one independent observer measured the change of lordotic curve and height of intervertebral space where cages were placed. Segmental lordotic curve angle was measured by Cobb method. Height of intervertebral space was measured by averaging the sum of anterior, posterior, and midpoint interbody distance. Clinical outcome was assessed on Prolo scale at 1month of postoperative period. Results : Nineteen paired wedge shape cages were placed on L4-5 level and 6 paired same cages were inserted on L5-S1 level. Among them, 18patients showed increased segmental lordotic curve angle. Mean increased segmental lordotic curve angle after placing the wedge shape cages was $1.96^{\circ}$. Mean increased disc height was 3.21mm. No cases showed retropulsion of cage. The clinical success rate on Prolo's scale was 92.0%. Conclusion : Posterior lumbar interbody fusion with wedge shape cage provides increased lordotic curve, increased height of intervertebral space, and satisfactory clinical outcome in a short-term period.

• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.28-37
• /
• 1999

This investigation is the result of the structural analysis by finite element method and test for considering stress distribution and stress concentration to be generated according to the change of attached shape and method of the bracket to pipe in welding structure. Generally, members that consist structures are subjected to various forces and are jointed each other with a number of bracket. In this case, circular pipe was adapted in order to weld these members easily and to study the optimal design which is used a beam with shape section as main components of the structure, According to attached shape and method, distributed stress on circular pipe is appeared so differently. This may result deeply effects with respect to thickness, material properties. So a study on attaching shape and method of bracket to circular pipe is needed. In this paper, to obtain the maximum equivalent stress or stress concentration was used experimental and F.E.M. analysis. First five parameter was defined with respect to attached a shape and method to circular pipe i.e. the variation of the attached area, the variation of the attached shape, the variation of the attached length, the variation of both directin angles, the variation of the upper angle. Afterward the experimental analysis was practiced as the variation of the both direction angel and the finite element analysis was practiced as each parameters. We can discover stress distribution and stress concentration according to the change of form of bracket. And the result can be referenced for a design of similar structure.