• 한국환경복원기술학회지
• /
• 제16권1호
• /
• pp.159-170
• /
• 2013

The effect of climate change on urban woody plants remains difficult to predict in urban areas. Depending on its tolerances, a plant species may stay and survive or stay with slowly declining remnant populations under a changing climate. To predict those vulnerabilities on urban woody plants, this study suggests a basic bioclimatic envelop model of heat requirements, cold tolerance, chilling requirements and moisture requirements that are well documented as the 'climatic niche'. Each component of the 'climatic niche' is measured by the warmth index, the absolute minimum temperature, the number of chilling weeks and the water balance. Regarding the utility of the developed model, the selected urban plant's present probabilities are suggested in the future climate of Seoul. Both Korea and Japan's thermal thresholds are considered for a plant's optimal climatic niche. By considering the thermal thresholds of these two regions for the same species, the different responses observed will reflect the plant's 'hardening' process in a rising climate. The model illustrated that the subpolar plants Taxus cuspidata and Ulmus davidiana var. japonica are predicted to have low suitability in Seoul. The temperate plants Zelkova serrata and Pinus densiflora, which have a broad climatic niche, exhibited the highest present probability in the future. The subtropical plants Camellia japonica and Castanopsis cuspidata var. sieboldii may exhibit a modest growth pattern in the late 21C's future climatic period when an appropriate frost management scheme is offered. The model can be used to hypothesize how urban ecosystems could change over time. Moreover, the developed model can be used to establish selection guidelines for urban plants with high levels of climatic adaptability.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.486-486
• /
• 2018

During the post green revolution era, wheat and rice were the main crops of concern to cater the food security issues of Pakistan. The use of semi dwarf high yielding varieties along with extensive use of fertilizers and surface and ground water lead to substantial increase in crop production. However, the higher crop productivity came at the cost of over exploitation of the precious land and water resources, which ultimately has resulted in the dwindling production rates, loss of soil fertility, and qualitative and quantitative deterioration of both surface and ground water bodies. Recently, during the past two decades, severe climate changes are further pushing the Pakistan's wheat-rice system towards its limits. This necessitates a careful analysis of the current crop water requirements and water footprints (both green and blue) to project the future trends under the most likely climate change phenomenon. This was done by using the FAO developed CROPWAT model v 8.0, coupled with the statistically-downscaled climate projections from the 8 Global Circulation Models (GCMs), for the two future time slices, 2030s (2021-2050) and 2060s (2051-2080), under the two Representative Concentration Pathways (RCPs): 4.5 and 8.5. The wheat-rice production system of Punjab, Pakistan was considered as a case study in exploration of how the changing climate might influence the crop water requirements and water footprints of the two major crops. Under the worst, most likely future scenario of temperature rise and rainfall reduction, the crop water requirements and water footprints, especially blue, increased, owing to the elevated irrigation demands originating from the accelerated evapotranspiration rates. A probable increase in rainfall as envisaged by some GCMs may partly alleviate the adverse impacts of the temperature rise but the higher uncertainties associated with the predicated rainfall patterns is worth considering before reaching a final conclusion. The total water footprints were continuously increasing implying that future climate would profoundly influence the crop evapotranspiration demands. The results highlighted the significance of the irrigation water availability in order to sustain and improve the wheat-rice production system of Punjab, Pakistan.

• 융합보안논문지
• /
• 제17권5호
• /
• pp.57-61
• /
• 2017

국가 연구망(National Research Network)은 각국의 첨단과학기술을 지원하기 위해 존재한다. 국가 연구망은 각 분야의 과학기술에 대한 요구사항을 충족하여야 하며, 지속적으로 변해가는 주변 환경에 대해서 끊임없이 발전해 나가야 한다. 최근 데이터 중심의 과학기술 연구형태에 따른 수요가 증가하고 있으며, 이러한 수요에 대응하기 위해 선진 국가 연구망들은 중장기적인 전략을 수립하고 있다. 본 논문에서는 선진 연구망에 대한 현황과 국가 연구망 동향 및 요구사항을 연구망환경의 변화, 과학/기술의 변화, 산업과 삶의 변화의 관점에서 분석하였다. 또한 분석한 요구사항에 대응하기 위해 미래형 네트워크 백본 구축, 사용자 중심의 협업 연구 환경 제공, 글로벌 협업 네트워크 서비스 제공, 첨단과학기술 연구데이터 정보 보호 서비스 제공 등에 관해 중장기 발전 방향 및 방안을 제시한다.

• 한국농공학회논문집
• /
• 제51권2호
• /
• pp.35-41
• /
• 2009

The impacts of climate change on paddy irrigation requirements for Nakdong river basin in Korea have been analyzed. The HadCM3 model outputs for SRES A2 and B2 scenarios and International Water Management Institute $10'{\times}10'$ pixels observed data were used with kriging method. Maps showing the predicted spatial variations of changes in climate parameters and paddy irrigation requirements have been produced using the GIS. The results showed that the average growing season temperature was projected to increase by $2.2^{\circ}C$ (2050s A2), $0.0^{\circ}C$ (2050s B2), $3.7^{\circ}C$ (2080s A2) and $2.9^{\circ}C$ (2080s B2) from the baseline (1961-1990) value of $21{\circ}C$. The average growing season rainfall was projected to increase by 15.2% (2050s A2), 24.2% (2050s B2), 41.4% (2080s A2) and 16.7% (2080s B2) from the baseline value of 900 mm. Average volumetric irrigation demands were projected to decrease by 3.7% (2050s A2), 7.0% (2050s B2), 10.2% (2080s A2) and 1.4% (2080s B2) from the baseline value of $1.25{\times}10^9\;m^3$. These results can be used for the agricultural water resources development planning in the Nakdong river basin for the future.

• Journal of Preventive Medicine and Public Health
• /
• 제24권4호
• /
• pp.485-495
• /
• 1991

This study examined the effects of referral requirements for insurance patients which have been enforced since July 1, 1989 when medical insurance coverage was extended to the whole population except beneficiaries of medical assistance program. The requirements are mainly aimed at discouraging the use of tertiary care hospitals by imposing restrictions on the patient's choice of a medical service facility. The expectation is that such change in the pattern of medical care utilization would produce several desirable effects including increased efficiency in patient care and balanced development of various types of medical service facilities. In this study, these effects were assessed by the change in the number of out-patient visits and bed-days per illness episode and the share of each type of facility in the volume of services and the amount of expenditures after the implementation of the new referral system. The data for analysis were obtained from the claims to the insurance for government and school employees. The sample was drawn from the claims for the patients treated during the first six months of 1989, prior to the enforcement of referral requirements, and those of the patients treated during the first six months of 1990, after the enforcement. The 1989 sample included 299,824 claims (3.6% of total) and the 1990 sample included 332,131 (3.7% of total). The data were processed to make the unit of analysis an illness episode instead of an insurance claim. The facilities and types of care utilized for a given illness episode are defined to make up the pathway of medical care utilization. This pathway was conceived of as a Markov Chain process for further analysis. The conclusion emerged from the analysis is that the enforcement of referral requirements resulted in less use of tertiary care hospitals, and thereby decreased the volume of services and the amount of insurance expenses per illness episode. However, there are a few points that have to be taken into account in relation to the conclusion. The new referral system is likely to increase the use of medical services not covered by insurance, so that its impact on national health expenditures would be different from that on insurance expenditures. The extension of insurance coverage must have inereased patient load for all types of medical service organizations, and this increase may be partly responsible for producing the effects attributed to the new referral system. For example, excessive patient load for tertiary care hospitals may lead to the transfer of their patients to other types of facilities. Another point is that the data for this study correspond to very early phase of the new system. But both patients and medical care providers would adapt themselves to the new system to avoid or overcome its disadvantages for them, so as that its effects could change over time. Therefore, it is still necessary to closely monitor the impact of the referral requirements.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.231-232
• /
• 2016

Configuration Management (CM) is a process of identifying and documenting the characteristics of a Structures, Systems and Components (SSCs), and of ensuring that changes to these characteristics are properly assessed, approved, issued, implemented and verified. There are requirement management, change control, facility configuration information management for CM activities. In order to improve safety of Nuclear Power Plant(NPP), it is necessary to manage change item systematically. Existing CM concept is focused on the NPP in operation. On the other hand, NPP under construction is difficult to efficiently manage the change because of different change process from varoius stake-holders. This research considers method of consolidation change process for NPP to ensure that approved changes are accurately reflected in the design requirements, facility configuration information, and the physical configuration.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.566-569
• /
• 2013

The purpose of this research is to develop the technology to meet the requirements of the design content, and to build a 'Requirement Information Management Model' for the design project. The model that should be used in the early design stage will undergo the following process: First, basic requirements would be defined by extracting the design content in the form of a reusable library of space units. At the next stage, requirement information should be modified after considering unique characteristics for the project and conflict problems between function and performance.

• 한국항해항만학회지
• /
• 제46권5호
• /
• pp.392-399
• /
• 2022

With digitalization accelerated by the 4th industrial revolution, the marine traffic environment is also expected to change rapidly. The purpose of this study was to derive a new service for Aids to Navigation (AtoN) to respond to a new marine traffic environment and suggest service requirements from the perspective of the ship's operator. For this purpose, a survey of ship operators was conducted and IPA analysis was performed. Marine traffic intelligence and information services and Image-based ocean environment information services were deduced as high-priority services from the perspective of ship operators. Thus, the derived results can serve as basic data for developing new AtoN services and determining policy directions.

• 문화기술의 융합
• /
• 제7권4호
• /
• pp.879-892
• /
• 2021

수주생산 환경에서 제조업체의 견적정보는 다양한 고객요구에 대응하여, 프로젝트의 입찰, 수주, 그리고 생산할 제품의 기초정보로 사용하는 중요한 정보이다. 이 견적정보는 고객요구, 제품생산 환경의 변화, 기술제휴사의 도면정보 변경, 그리고 제품의 기술 개선 등의 여러 요인에 의해 변경된다. 이러한 변경으로 인하여, 제조사가 고객의 요구사항을 반영하여 작성중인 견적정보에 다양한 변경이 발생한다. 이러한 다양한 변경요인에 따른 견적정보의 변경은 수주생산 기업의 입장에서 견적관리업무에 많은 부담을 주고 있다. 특히, 견적의 변경요인으로 인한 견적정보 변경은 고객중심의 주문생산 환경에서 고객의 요구사항에 의해 불가피하고 빈번하게 발생한다. 본 논문에서는 견적생성 프로세스를 기준으로 견적변경 프로세스를 제시하고, 일관적이고 효율적인 견적변경처리 방안을 제시하고자 한다. 이를 위하여, 견적의 변경이 발생하는 요인을 정의하고, 각 요인에 대한 변경유형을 정의하였다. 그리고 견적변경에 대한 발생 요인별 사례를 통하여 견적변경 프로세스가 견적관리시스템에 적용되는 과정을 보여준다. 또한 제안된 견적변경 요인, 견적변경 유형, 견적변경 프로세스, 그리고 견적체계 관리의 유용성을 보여주기 위하여, 고객 중심의 수주생산기업인 'H'사의 선박엔진 부문의 통합 견적관리시스템에서의 견적변경처리 기능 및 절차에 적용하였다. 그 결과, 견적변경 요인에 따른 견적변경 처리 및 관리가 효율적으로 수행됨을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권5호
• /
• pp.2141-2155
• /
• 2020

In order to meet the requirements of background change, illumination variation, moving shadow interference and high accuracy in object detection of moving camera, and strive for real-time and high efficiency, this paper presents an object detection algorithm based on sparse approximation recursion and sparse coding migration in subspace. First, low-rank sparse decomposition is used to reduce the dimension of the data. Combining with dictionary sparse representation, the computational model is established by the recursive formula of sparse approximation with the video sequences taken as subspace sets. And the moving object is calculated by the background difference method, which effectively reduces the computational complexity and running time. According to the idea of sparse coding migration, the above operations are carried out in the down-sampling space to further reduce the requirements of computational complexity and memory storage, and this will be adapt to multi-scale target objects and overcome the impact of large anomaly areas. Finally, experiments are carried out on VDAO datasets containing 59 sets of videos. The experimental results show that the algorithm can detect moving object effectively in the moving camera with uniform speed, not only in terms of low computational complexity but also in terms of low storage requirements, so that our proposed algorithm is suitable for detection systems with high real-time requirements.