• Journal of Climate Change Research
• /
• v.9 no.1
• /
• pp.81-90
• /
• 2018

"The Framework Act on Low-Carbon Green Growth" specifies the requirements for the development and verification of emission factors for establishing reliable national greenhouse gas statistics. The scope of the regulations covers the development and validation of energy, industrial processes, solvents and other product use, agriculture, land use, land use change and emission and absorption coefficients of the forestry and waste sector as defined in the 1996 IPCC Guideline and GPG 2000, The minerals sector to be covered in this study belongs to industrial processes. As a representative method for quantifying and evaluating GHG emission factors, there are emission grade quality grading and DARS (Data Rating Rating System) in the 'Procedures for Preparing Emission Factor Documents (1997)' reported by US-EPA. However, the above two methods are not specific and comprehensive, and lack the details for accurate emission factor verification. Therefore, there is a need for a method for verifying and quantifying certified greenhouse gas emission factors that reflects characteristics of each industry sector in Korea and accord with IPCC G/L and GHG target management. In this study, we conducted a weighted study on quantitative and evaluation lists of emission factor using questionnaires to develop a more accurate methodology for quantifying national greenhouse gas emission factors in the mineral sector. Quantification and evaluation of emission factor are classified into essential verification and quality evaluation. The essential verifications are : administrative compatibility, method of determining emission factors, emission characteristics, sampling methods and analysis methods, representativeness of data. The quality evaluations consisted of the quality control of the data, the accuracy of the measurement and analysis, the level of uncertainty, not directly affect the emission factor, but consisted of factors that determine data quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.409-414
• /
• 2021

Tightness performance that blocks compartments is important for surface ships to achieve superior mission performance and survivability in combat environments. To meet the above requirements, airtightness of the structural elements and the appropriate strength to specific areas are checked during a test run after ship construction. In particular, air tests of compartments adjacent to the water surface are performed. In an air test, air is injected into the compartment up to the test pressure of the test memo. The pressure drop value is checked after 10 minutes to determine if the requirements of the corresponding area are satisfied. In summer, however, when the influence of the outside temperature is large, a phenomenon in which the internal pressure increases during the air test was identified. This phenomenon reduces the reliability of the test result. Therefore, a system was designed to compensate for temperature changes in the compartments through this study. The developed system calculates the amount of pressure change caused by a temperature change in the compartment and outputs a correction value. The pressure change was calculated using the ideal gas equation, reflecting the maintenance, increase, and decrease in temperature during the test process. A comparison of the calculated pressure correction value with the database of NIST REFPROP revealed a difference of 0.126% to a maximum of 0.253%.

• Journal of the Korean Geographical Society
• /
• v.51 no.2
• /
• pp.235-253
• /
• 2016

China has been developing a new auto industry growth plan since 2004. In line with this initiative, China actively adopted its policy favoring foreign companies' investment which had a competitive edge over their technologies and manufacturing methodologies. To meet this demand in policy and market change, many foreign auto companies and their parts' manufacturers including Korean auto companies joined this stream. Policy change favoring higher technologies applicable in China requested auto companies' swift adaptation to meet the policy requirements by higher technologies with innovation and introduction of those foreign technologies to China. The spatial (excellence) strategy was followed by the increase in its efficiency and competiveness of each region, which were materialized by or in the form of; Firstly, strategic partnership with China auto companies and encouragement of Korea auto parts manufacturing companies to set up its own factories in China. Secondly, modularization and platform sharing strategy by applying enhanced technologies. Thirdly, strategic utilization of China local government's incentive policies. As production management methodology, JIS was adopted all across the board to meet the on-demand market requirements in the manufacturing processes. Auto part manufacturers had been integrated regionally based on forward linkages and modules. As a result, regional-specific auto industry complexes have been made in the places such as Beijing-Hyundai in the north, Dongfeng-Yueda-Kia in the south, common auto parts at central area like Qingdao, and other parts and raw materials in the vicinity of Shanghai.

• Journal of KIISE:Software and Applications
• /
• v.29 no.9
• /
• pp.605-618
• /
• 2002

The CBD (Component Based Development) is a requisite technique for the Time-To-Market, and a highly reusable component should be provided to develop a variety of domain applications with the use of components. To increase the reusability of components, they should be developed by analyzing requirements of many different kinds of domains. However, to analyze requirements of a variety of domains related to the components to be developed and to include them inside the components will give burden to developers. Also, providing only general components that have common facilities for the several domains is not easy to accomplish the time-to-market since there are other domains that the developers have to develop. As such, developing common component through the analysis of several domains at the time of the CD (Component Development) does not always guarantee high reusability of the component, but gives burden to developers to develop another development since such components have common functions. Considering this, this paper proposes the component customization technique to reuse common components as well as special components. The reusability of the component can be increased by providing changeability of the attribute, behavior and message flow of the component. This customization technique can change the message flow to integrate developed components or to provide new functions within the component. Also, provides a technique to replace the class existing within the component with other class or to exchange the integrated component with the component having a different function so that requirements from a variety of domains may be satisfied. As such, this technique can accept the requirements of several domains. As such, this customization technique is not only the component with a common function, but it also secures reusability components in the special domain.

• The Journal of the Korea Contents Association
• /
• v.5 no.4
• /
• pp.11-19
• /
• 2005

With the development of IT technologies, IT environment is making great change over life whole and is displacing business and business achievement systems of industry at the fast speed. The system which is proposed in this paper, supports environments to share codes, execution files and objects between project teams to maximize productivity and efficiency in web environments. Through impact assessment which is achieved at correction and development of existing programming codes by maintenance requirements, it minimizes obstacle occurrence factors and supports tracing obstacle sources. Through conversion the correction and development histories of existing sources and executable files between project teams to XML documents suitable to share in web, it stores them to relational database. In this paper, through impact assessment and change management for the correction and development of applications in the existing system development environments, we support efficient IT developments.

• Journal of Multimedia Information System
• /
• v.8 no.2
• /
• pp.93-100
• /
• 2021

Under the time-varying temperature, the high-temperature radiation of forgings and the change of reflection characteristics of oxide skin on the surface of forgings lead to the difficulty of obtaining images to truly reflect the geometric characteristics of forgings. It is urgent to study the clear and reliable acquisition method of hot forging feature image under time-varying temperature to meet the requirements of visual measurement of hot geometric parameters of forgings. Based on this, this chapter first puts forward the quality evaluation method of forging feature image, which provides guarantee for the accurate evaluation of feature image quality. Furthermore, the factors that affect the image quality, such as the radiation characteristics of forgings and the photographic characteristics of cameras, are analyzed, and the imaging spectrum which can effectively suppress the radiation intensity of forgings is determined. Finally, aiming at the problem that the quality of image acquisition is difficult to guarantee due to the drastic change of radiation intensity of forgings under time-varying temperature, an image acquisition method based on minimum signal-to-noise ratio (SNR) based laser light intensity adaptation is proposed, which significantly improves the definition of feature light strips in forging images at high temperature, and finally realizes the clear acquisition of feature images of large-scale hot forging under time-varying temperature.

• Journal of Nutrition and Health
• /
• v.19 no.1
• /
• pp.52-65
• /
• 1986

This study deals with the conditions of nutritional intake of the urban elderly (age sixty years and older). This study analysis is based on factors that are influenced on the prevalent conditions of dietary-intake of the urban elderly either it be for better ment of health or desire. The method of this research was based on the interview-survey with questinaire in the Seoul area. In comparison to the surveys taken of the rural society and the urban slum elderly the urban elderly standard nutritional requirements was higher. Of the standard nutritional requrieemtns the twomen's nutrition intake was higher than of the men. But still the problem of malnutrition existed in the urban elderly both men and women at the probability nutritional deficienty rate higher than 30%. The food intake frequency factors which might influence the condition of nutritional intake was significant more than condition of eating. Another important factors of the conditions of nutritioal intake of the urban elderly are one's self-consciousness of health and degree of one's will change . In healthy case of the aged, their will was almost maintained and hand -grip strength was high when they had regular meal with their family . For elderl with the lower academic career and the one with more satisfactory to his meal, their wills didn't change before or after retirement. The objectiveness of this survey is to convince the elderly that the problems of nutritional deficiency can only be solved by reeducation and to improve their nutritional diet to have the enjoyments of a healtheir elderly life.

• Environmental Engineering Research
• /
• v.18 no.2
• /
• pp.65-69
• /
• 2013

Despite the most severe weather and geological conditions, Korean people in earlier times were successful in maintaining sustainable water supplies because they understood the importance of rainwater management, and developed technologies and a philosophy which were needed to live under such circumstances. Recently, the Korean people have suffered frequent incidence of flood damage and drought, and have gradually started to remind themselves of the lessons of the past, which can be described as proactive, multipurpose rainwater management. Most of the problems associated with water and energy can be solved by the integration of rainwater management practices. The concept of multipurpose rainwater management and two examples of its practice are discussed. One is a design for a multipurpose rainwater tank which has been used in a building project, and is based on Korean philosophy. Secondly, a regulation was promulgated recently in Seoul that requires the building of rainwater tanks in new buildings over a certain size. The primary purpose is for the prevention of flooding, but water conservation is a secondary intention. Two examples of proactive rainwater management are discussed, one being public involvement in rainwater management, and the second being the rainwater piggy bank microcredit project. In order to maintain sustainability, to meet the requirements of the Millennium Development Goals, and to be prepared for the effects of climate change, it is expected that multipurpose and proactive rainwater management will be a very effective approach for both developing countries and developed countries. A worldwide network of scientific researchers, as well as a great number of professions, has suggested the promotion of rainwater management.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.11
• /
• pp.63-71
• /
• 2010

FormFactors is one of the most critical design factors in early development of mobile phone, and proper selection of FormFactors is necessary for smoothness of product development and customer satisfaction. Especially, emergence of mobile convergence added so various functions besides its original call function that importance of selecting FormFactors has increased because multiform FormFactors are needed. However there is problem such as frequent change of decision making in existing process because established process picks out FormFactors sensibly and arbitrarily through idea pull and so forth. We proposed FormFactors selection process by Axiomatic Design, set approach method and block approach method for reasonable and systematical FormFactors selection. First of all, we set the purpose of mobile phone development, and it is examined by Axiomatic Design. FormFactors design matrix is deduced through this process, the numbers of axes and rails are proposed using set approach method, and then patterns of FormFactors are embodied by block approach method. Particularly process application was tried through case study of mobile phone development, and we ensured that new FormFactors can be presented to a designer by systematical verification if change of customer requirements occurs through our process.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.5
• /
• pp.689-697
• /
• 2012

This paper proposes a new coordinated voltage control scheme between STATCOM (Static Synchronous Compensator) and reactive power compensation devices, such as shunt elements(shunt capacitor and shunt reactor) and ULTC(Under-Load Tap Changer) transformer in a local substation. If STATCOM and reactive power compensators are cooperatively used with well designed control algorithm, the target of the voltage control can be achieved in a suddenly changed power system. Also, keeping reactive power reserve in a STATCOM during steady-state operation is always needed to provide reactive power requirements during emergencies. This paper describes the coordinative voltage control method to keep or control the voltage of power system in an allowable range of steady-state and securing method of momentary reactive power reserve using PSS/E with Python. In the proposed method of this paper, the voltage reference of STATCOM is adjusted to keep the voltage of the most sensitive bus to the change of loads and other reactive power compensators also are settled to supply the reactive power shortage in out range of STATCOM to cope with the change of loads. As the result of simulation, it is possible to keep the load bus voltage in limited range and secure the momentary reactive power reserve in spite of broad load range condition.