• Journal of the Korean Society of Radiology
• /
• v.9 no.4
• /
• pp.239-247
• /
• 2015

It should be accurate dose calculation to increase the efficiency of radiation therapy, and it is priority to figure out the beam characteristics for this purpose. The target and primary collimator in head components of the linear accelerator have the greatest influence on determining the beam characteristics which is caused by backscatter and it is the factor to consider the shielding structures and equipment management. In this study, we made modeling of the linear accelerator through the Geant4 Monte Carlo simulation and investigated backscatter according to the change of the size and shape in head components. For the scattered electrons, it showed the greatest number of distributions inside of the inner radius at primary collimator. But, for the scattered photons which have the high energy, it was mostly located outside of the inner radius at primary collimator. Scattered positrons showed a small occurrence in about 0.03%. According to the change of the inner radius at primary collimator, it was great changes in the inside of inner radius for all three scattered particles. According to the change of the outer radius at primary collimator, it was shown some considerable effects from more than 60 mm outer radius. It was no significant effect according to the change of target thickness. In this study, we found that backscatter should be considered, and figured out that geometric size and shape of the peripheral components are the factors that influences the backscatter effect.

• Research in Community and Public Health Nursing
• /
• v.22 no.2
• /
• pp.173-183
• /
• 2011

Purpose: This study was to compare the Transtheoretical Model components according to the stage of change in smoking cessation behavior and identify factors associated with preparation to quit smoking among college smokers. Methods: Data were collected from 224 undergraduate students using the self-report questionnaire. The survey variables comprised the stage of change in smoking cessation, self-efficacy, and decisional balance and process of change in smoking cessation. Results: There were significant differences in self-efficacy, cons of smoking, and the process of change according to the stage of change in smoking cessation behavior. Cons of smoking and self liberation were significant factors related to the preparation stage of smoking cessation. Conclusion: Strategies to enhance cons of smoking and self liberation in college smokers will be an important intervention component to prepare and plan smoking cessation in future studies.

• Journal of the Korean Society of School Health
• /
• v.4 no.2
• /
• pp.146-158
• /
• 1991

There is no doubt that the school health education in school health services is the most important component. But the concept and scope of the school health education is still not recognized and accepted satisfactorily in Korea. It is generally accepted that health education is a process of changing of attitude and behavior forward health practice. The term attitude refers to certain regularities on the part of an individual in feelings, thoughts, and predispositions to act toward some aspect of his environment. Attitudes have three components: affective, cognitive, and behavioral. The strategies of attitude change in school health education consist of incentive, justification, and coersion. In this study I explained reinforcement and motivation as the strategies of attitude change. The attitude change is not built in a day. When the teachers give the pupils knowledge, comprehension, or skill through school health education proper to each stage, then the attitude change will be realized.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.456-466
• /
• 2017

This work investigated the particle morphology change to difference in milling media in a metal based composite fabrication process using a stirred ball mill with ball behavior of DEM simulation. A simulation of the three dimensional motion of grinding media in the stirred ball mill for the research of grinding mechanism to clarify the force, kinetic energy, and medium velocity of grinding media were calculated. In addition, the rotational speed of the stirred ball mill was changed to the experimental conditions for the composite fabrication, and change of the input energy was also calculated while changing the ball material, the flow velocity, and the friction coefficient under the same conditions. As the rotating speed of the stirred ball mill increased, the impact energy between the grinding media to media, media to wall, and media and the stirrer increased quantitatively. Also, we could clearly analyze the change of the particle morphology under the same experimental conditions, and it was found that the ball behavior greatly influences in the particle morphology changes.

• Ocean and Polar Research
• /
• v.31 no.4
• /
• pp.369-377
• /
• 2009

Performance of the Korea Ocean Research and Development Institute (KORDI) operational storm surge prediction system for the Korean coast is presented here. Results for storm surge hindcasts and forecasts calculations were analyzed. The KORDI storm surge system consists of two important components. The first component is atmospheric models, based on US Army Corps of Engineers (CE) wind model and the Weather Research and Forecasting (WRF) model, and the second components is the KORDI-storm surge model (KORDI-S). The atmospheric inputs are calculated by the CE wind model for typhoon period and by the WRF model for non-typhoon period. The KORDI-S calculates the storm surges using the atmospheric inputs and has 3-step nesting grids with the smallest horizontal resolution of ${\sim}$300 m. The system runs twice daily for a 72-hour storm surge prediction. It successfully reproduced storm surge signals around the Korean Peninsula for a selection of four major typhoons, which recorded the maximum storm surge heights ranging from 104 to 212 cm. The operational capability of this system was tested for forecasts of Typhoon Nari in 2007 and a low-pressure event on August 27, 2009. This system responded correctly to the given typhoon information for Typhoon Nari. In particular, for the low-pressure event the system warned of storm surge occurrence approximately 68 hours ahead.

• Earthquakes and Structures
• /
• v.22 no.1
• /
• pp.1-13
• /
• 2022

When a building suffers damages under moderate to severe loading condition, its physical properties such as damping and stiffness parameters will change. There are different practical methods besides various numerical procedures that have successfully detected a range of these changes. Almost all the previous proposed methods used to work with translational components of mode shapes, probably because extracting these components is more common in vibrational tests. This study set out to investigate the influence of using both rotational and translational components of mode shapes, in detecting damages in 3-D steel structures elements. Three different sets of measured components of mode shapes are examined: translational, rotational, and also rotational/translational components in all joints. In order to validate our assumptions two different steel frames with three damage scenarios are considered. An iterative model updating program is developed in the MATLAB software that uses the OpenSees as its finite element analysis engine. Extensive analysis shows that employing rotational components results in more precise prediction of damage location and its intensity. Since measuring rotational components of mode shapes still is not very convenient, modal dynamic expansion technique is applied to generate rotational components from measured translational ones. The findings indicated that the developed model updating program is really efficient in damage detection even with generated data and considering noise effects. Moreover, methods which use rotational components of mode shapes can predict damage's location and its intensity more precisely than the ones which only work with translational data.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.11 no.2
• /
• pp.1-12
• /
• 2007

Objectives: The aim of the present investigation was to determine whether the finger photoplethysmographic waveform of a healthy young man will become analogous to those of healthy old men when the photoplethysmographic harmonic components in the young man decrease. Methods and Results: The finger photoplethysgmoraphy was measured in 21 old men over the age of 60 years and a young men. We acquired the representative pulse waveform of old man by averaging the finger photoplethysmographic waveforms measured in the old men. after the photoplethysmographic harmonic components in the young man were diminished with notch filtering, we compared the representative pulse waveform of old man and the pulse waveforms of which the harmonic components decreased in the young man. The finger photoplethysmographic waveform of the young man became analogous to those of the old men as the photoplethysmographic harmonic components in the young man were diminished with notch filtering. Conclusions: Decrease of the second harmonic component may be a precondition of typical age-related change of the pulse waveform.

• Biomedical Science Letters
• /
• v.13 no.3
• /
• pp.223-230
• /
• 2007

Low power laser and neuromuscular electrical stimulation have been utilized in many clinical applications for the treatment of musculoskeletal lesion. This study was to investigate the effects of low power He-Ne IR laser and neuromuscular electrical stimulation on the change of the serum biochemical components in experimentally induced muscle injured rats. The twenty Sprague-Dawley male rats were randomly assigned to the 4 groups: the normal group (n=5), the control group (n=5), the low power laser irradiation group (LLI) (n=5) and the neuromuscular electrical stimulation group (NMES) (n=5). The experimentally induced muscle injury was induced by the subcutaneous injection of a 0.1 ml Freund's Complete Adjuvant into the right hind paw and calf muscles in control, LLI and NMES groups. The LLI group was irradiated with He-Ne IR laser for 5 minutes every day during 10 days. Also, the NMES group was electrically stimulated 15 minutes every day during 10 days. The normal and control groups were not received with any therapeutic intervention. The authors performed tests which were the concentration of the serum biochemical components to detect the effects of therapeutic interventions. The results were as follows: 1. The level of the aspartate aminotransferase (AST) was significantly decreased in the LLI and NMES groups compare to the control group. 2. The level of the serum lactate dehydrogenase (LDH) was significantly decreased in the LLI and NMES groups compare to the control group. 3. The level of the serum creatine kinase (CK) was significantly decreased in the LLI and NMES groups compare to the control group. From the results, we could come to the conclusion that low power laser and neuromuscular electrical stimulation could be accelerating healing processes of skeletal muscle injury and further clinical work will be required.

• Food Science of Animal Resources
• /
• v.38 no.5
• /
• pp.1080-1091
• /
• 2018

The eggshell, which is a complex and highly ordered structure, is very important factor for food safety and egg marketing. This study investigated the changes in eggshell structure and shell components in relationship to hen age. For this study, we examined the histological change of the endometrium of the 30-, 60-, and 72-wk-old commercial layers, and analyzed the ultrastructure and ionic composition of their eggshells. The results showed that histological deformation, fibrosis, atrophy and elimination of micro-villi in the uterus endometrium were found through microscopic observation that was associated with increasing hen age. Concentration of blood-ion components such as $Ca^{2+}$, $Na^+$, $K^+$, and $Cl^-$ ions did not change with age. Along with the results from the ultrastructure analysis of the eggshell, the palisade layer ratio and the density of mammillary knobs were significantly decreased in older hens. In addition, the type B mammillary knobs were frequently observed with increasing hen age. In the mineral element assay from the eggshell, $Ca^{2+}$, $S^{2-}$, and $Co^{2+}$ significantly decreased with increasing hen age, whereas $Na^+$, $K^+$, and $V^{2+}$ significantly increased. Therefore, the damages of endometrial tissue inhibit the processes of ion transmission and the crystallization of eggshell formation, resulting in a large and non-uniform mammillary knob formation. This means the conditions of endometrial cells affect the formation of the eggshell structure. In conclusion, hen aging causes the weakness of the eggshell and degrades the eggshell quality.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.589-594
• /
• 2017

The purpose of this study is to provide basic data for design and pattern development research in the modernization of Cheollik by comparing and analyzing the interrelationships between the components of the Cheollik. The 237 pieces of excavated costume Cheollik in the museums were surveyed. The size of the Cheollik components were examined by 100 year unit from 1400s to after 1800s. In the 1400s, the length of Cheollik was the shortest and the length of top was longer than the bottom. In the 1700s, the total length was the longest and the bottom was longer than the top. As the age increases, the total length and the bottom become longer and the length of the top becomes shorter. Poom and Gutseop were the largest in the 1400s and the smallest the after 1800s. As the age of the Poom and Gutseop decreased, the width of the Anseop increased. Gutseop was always present but Anseop was not always present in Cheollik components. As the ages passed, Jindong and Soogu became narrower and Baerae became wider. These change of Cheollik's sleeves form were affected by GongBok(so-called official wear) sleeves. By age, Cheollik did not show any big change in the basic shape, but the partial dimensions of the components showed changes. If the design and pattern research for modernization is done based on systematic establishment of pattern dimension of Cheollik, Cheollik dress combines practicality while preserving beauty and tradition at the same time.