• 한국건설관리학회논문집
• /
• 제5권5호
• /
• pp.109-116
• /
• 2004

우리나라 건설기업들은 최근 경제 위기를 겪으면서 대외적으로 커다란 환경변화의 요구에 직면해 왔다. 내$\cdot$외부의 환경변화는 기업의 경영조직에 많은 영향을 끼치고 이러한 경영조직은 기업의 경영성과와 밀접한 관계를 가지고 있다. 이에 대응하여 건설기업들은 환경변화에 적응하고 경영성과를 증진시키기 위한 일환으로 기업 내 구조조정, 경영혁신, 조직개선 등의 명목으로 기업경영조직의 개선 노력을 기울이고 있다. 즉, 기업성장에 도움이 되지 않는 조직 구조는 오히려 기업에 역효과로 작용하게 되므로 기업은 가치를 높일 수 있는 효율적인 조직구조를 갖추어야 한다. 또한 향후 환경변화에 유연하게 대처할 수 있는 경영조직의 개발과 구축은 기업의 경영성과를 증대할 수 있는 중요한 기반이 될 수 있다. 이에 본 연구에서는 설문 및 자료조사를 통하여 기업의 조직구조를 분석하고 이를 유형화 한 후 OLC측면의 조직구조 형태분석으로 기업발전단계에 적정한 조직을 설계할 수 있는 모형을 제시하고자 한다.

• 인터넷정보학회논문지
• /
• 제17권4호
• /
• pp.87-93
• /
• 2016

한국의 고령화가 급속하게 진행됨에 따라 고령자의 삶의 질을 향상시키기 위한 필요성이 증가 하고 있으며, 이에 따라 건축 설계 방식들도 고령자의 주거 환경 향상 및 행태 변화에 대응하기 위한 모듈러 공법으로 전화되어가고 있으며 고령자들을 위한 다양한 IT 시스템들도 제안되어 오고 있다. 본 논문에서는 앞서 언급한 고령자를 위한 주거설계 기법과 IT기술들의 배타적인 발전에서 벗어나 건축 설계 초기부터 IT 기술과의 융합적 건축 설계를 하기 위한 방법론에 대하여 논하며, 구체적으로 고령자 행동 및 주거 IT서비스 계획 요소 분석과 모듈러 주거 공법에서 IT서비스의 융합의 고려사항들에 대하여 연구하였다.

• 한국지반공학회논문집
• /
• 제31권3호
• /
• pp.39-50
• /
• 2015

터널 내 콘크리트 라이닝 및 공동구에는 일반적으로 구조물의 형상 및 강성이 변화하는 위치, 부등침하의 우려가 있는 위치, 온도변화가 심한 곳 등에 신축이음을 설치하여 균열발생을 최소화시키고 있다. 하지만, 설치되는 신축이음의 소요간격은 터널내의 온도변화, 구조물의 시공 및 환경조건, 구조물과 배면지반과의 인터라킹 등에 의해서 영향을 받아 그 간격을 정량적으로 제시하기에는 한계가 있다. 그럼에도 불구하고 고속도로 전문시방서(Korea Expressway Corporation, 2012)나 도로설계편람(Ministry of Land, Transport and Maritime Affairs, 2010)에 의하면 콘크리트 라이닝의 신축이음은 터널 입출구부 50m 이내에서는 25m 이하 간격으로 터널 내부에서는 20-60m 간격으로 일률적으로 설치하도록 되어 있어(공동구는 별도기준이 없어 라이닝 기준 준용) 터널건설과 관련하여 여러 가지 시공 및 경제적 문제점을 야기하고 있다. 따라서 본 연구에서는 이와 같은 문제점을 해소하기 위하여 신축이음 관련 국내 외 설계기준 및 시방서 기준들을 분석함과 더불어 터널내의 신축이음 관련 현장시험시공과 이론 및 수치해석적 검토 등을 수행하여 터널내의 콘크리트 라이닝 및 공동구의 신축이음 설치방안에 대한 기준을 재정립하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1533-1537
• /
• 2005

The recent rainfall has happened to exceed the design rainfall after 1990 often, due to the characteristic of the rain to be changed. So, it is failing the ability safety of flood defense equipments to exist. This study analyzed the rainfall of Busan in 2003 since 1961 through the FARD2002(Frequency Analysis of Rainfall Duration). The result is equal to the thing which the design rainfall increased a little since 1991. The change of design rainfall created the result to be a flood discharge increase. This study investigated about the impact to influence on the river bank according to the change of flood discharge, the rainfall pattern change as well. This study used the program of HEC-RAS with HEC-HMS and calculated flood discharge with flood level of river. The result is equal to the thing which the computation became a flood level which exceed 50year(River design criteria-Korea water resources association 2002) criteria with 30year(River establishment criteria-Ministry of construction & transportation 1993), because of an area of impermeability increased of model basin.

• 대한건축학회논문집:구조계
• /
• 제34권3호
• /
• pp.61-68
• /
• 2018

As construction projects become larger, higher and more complex, efficient use of information is increasingly more important. As a result, there is a growing demand to apply BIM data obtained in the design stage to the construction stage. In this study, we propose a BIM-based construction schedule management system in order to promote introduction and application of BIM in the construction stage. Specifically, we provided how to build BIM database to be used for construction schedule management, and proposed how to obtain progress information and enter information based on analysis of progress schedule. We also provided a system of classifying construction works for more systematic use of BIM database, a process of using BIM database in construction projects, and a step-by-step guideline on how to establish the system. The proposed construction schedule management system provides information on particular construction schedule, as well as information and progress chart on delayed parts of the work so that a change in schedule can be managed. Additionally, by linking system database with the BIM model, construction progress can be checked in 3D simulation and a delay in construction schedule can be managed. As a result, using BIM at construction sites contributes to improving project productivity.

• 한국실내디자인학회논문집
• /
• 제16권6호
• /
• pp.19-27
• /
• 2007

As AEC(architecture, engineering and construction) industry becomes larger and more complex, much information is going into each part and phase. Therefore, the existing building design process has to change and collaboration is emphasized among participants in various fields. The purpose of this study is to compare and analyze existing building design process and integrated building design process based on BIM using a IDEF0 methodology. And then, it establishes a desirable domestic integrated building design process application plan focusing on the design phase of domestic cases. As a result of analysis, flowing conclusions are included ; Firstly, problems occur on the existing building design process that are accomplished with focusing on the outcome. It makes much errors because of 2D-based information. Another problems is that collaboration doesn't go on smoothly. But, integrated building design process is accomplished with the collaboration and the coordination which pursues change and perfects cooperation. Secondly, BIM is a process of effecting optimum integrating, re-using information, and expense reduction throughout the life-cycle of a building. Moreover, it establishes a basis for the integrated building design process to build a collaboration system.

• KIEAE Journal
• /
• 제17권1호
• /
• pp.5-13
• /
• 2017

Purpose: This study, by comprehensively the characteristics of new Hanok application techniques with the proposed site application technology in the course of the design changes that have been accumulated through Hanok technology development the second stage business, by analyzing the range of reflection, new Considering the direction reflects the efficiency of the new Hanok application techniques. Method: new Hanok application technology, it was been established through research and development of large 1 new Hanok technology it has been proposed through the "site-specific application techniques" and 2 builders and designers "space-time proposed technique" Analysis of the case, at the center of the design changes, the land the body of laws and regulations, the requirements of the public buildings, compared to the construction method and the like for the reduction of construction costs, new Hanok applied technology in the process of change by it There was analyzed whether acceleration on the range and step which is reflected in the design Result: The result of new Hanok applied technology was built through the demonstration build business case, process another major technology, foundation, woodwork, walls, roof, has been reflected in the ceiling construction, the inclusion of items in the proposed technique of construction , it was applied to the main steps in general, except for other construction work landscaping. Application techniques and construction proposal technology research team has presented, show the difference between the scope and method. With significance effort to improve the unreasonable traditional methods of these core processes that can be reflected in the field repeated the construction proposed technique as a result of the utility that can be applied for substantial construction.

• 한국건설관리학회논문집
• /
• 제19권3호
• /
• pp.70-78
• /
• 2018

기후변화에 대한 우려가 커지면서 건설산업에서도 환경부하를 줄이기 위해 지속적으로 노력하고 있으며, 환경부하를 산정하기 위한 효과적인 방법론으로써 LCA (life cycle assessment)가 제시되고 있다. 그러나, LCA는 환경부하량 산정을 위해 작업에 투입되는 자원량에 대한 정보가 필요하기 때문에 이러한 정보의 확보가 어려운 초기 설계단계의 환경적 검토에는 활용되지 못하고 있다. 이 연구에서는 도로의 배수시설물을 대상으로 표준단면에 기반한 작업물량산출체계를 개발하고 환경부하량을 산출할 수 있는 모델에 활용하였다. 이 모델은 초기 설계단계의 가용정보만으로 LCA에 필요한 자원량을 산정함으로써 환경부하량을 산출할 수 있다. 모델의 유효성을 검증하기 위해 5개의 검증사례를 적용하였으며 원단위추정모델 및 회귀모델과 비교하였다. 그 결과 평균 9.94%의 절대오차율평균을 나타내 다른 모델보다 상대적으로 정확하며 초기 설계단계에서 사용할 수 있는 유효한 모델이라는 점이 확인되었다.

• 한국실내디자인학회논문집
• /
• 제16호
• /
• pp.106-115
• /
• 1998

Latest modernism shows general idea of phenomenal space through nature of place motility and experience sinceded from standard form and it has general idea of space. therefore this study presents the tension and the relaxation as a method looking for spatal change and value that in spatial experience. For the analysis of work the Conference Pavillon of Tadoa Ando in the furniture company in Vitra Fire Station of Zaha Hidid is analyzed in spatial experence. As the result the result the systematic straight mixture that has a superrimotion with long retangle which the space acts independently and is shown in the drawing of absolutism is formed and collapses theregularity of construction form by decomposition annexation mixing collision and ambivalence. The spatial experiance in this unstable form changes the grade of rank of space by opposite phenomenon by the change of spatial flowing the disorted and vague space that is occurred by superrimotion which has no direction and change of lirht and place and consolidates dynamic strain makes possible to construct against the gravity. And it also creates experienced space thatis reaxed with maintenance of organization of unity harmony, and stsbility.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2002년도 춘계학술발표대회 논문집
• /
• pp.86-90
• /
• 2002

A new concept of building, office-tel, had gone through many ups and downs after being introduced to our nation. However, it overcame all the problems and is now an important part of the rural construction. It showed new potential especially on 1998 by flexibly corresponding when the IMF crisis occurred causing a radical social/economical change. It played a crucial role on activating the depressed real estate business and flourished like never before. This study analyses the office-tel market change pattern and factors by time period and grasps the causal relationship and attempts to set a new standard to evaluate the social/economical role and value of the office-tel.