• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.2
• /
• pp.80-85
• /
• 2020

Recently the incidence of musculoskeletal disorders in students and office workers is increasing, and the necessity of maintaining correct posture and corrective training is required, but related research is insufficient. In the previous study, a membrane sensor or a pressure sensor was placed on the seat cushion to see the deviation of the body weight, or a sensor that restrained the user was attached to measure the position change. In this study, a sensor device for detecting a position change in consideration of wearing comfort was developed, and the measured angle was verified through an analysis app. A sensor device consisting of an IMU sensor is attached to the cervical spine and vertebra spine to measure the position transformation in the sitting position. The change value of the position measured by the two sensors was converted into an angle, and the angle value is displayed in real time through the analysis app. In this study, the possibility of measuring the real-time change value according to the change in position, the convenience of wearing, and the tendency of angle measurement were proved. Future research should proceed with more precise angle calculation and correction of motion noise.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.4
• /
• pp.454-463
• /
• 2022

Objective: The purpose of this study was to compare concurrent validity and test-retest reliability based on Craniovertebral angle of 'Angles video goniometer', a smart phone application for convenient range of motion measurement, and 'Image J', an analysis software with high reliability and validity. This was conducted to find out whether 'Angle video goniometer' can be used clinically. Design: Cross-sectional study Methods: Fifty subjects were imaged laterally, and the angle of the head and spine was measured using Image J and the Angles video goniometer, respectively, in a resting posture and a chin in posture. The level of concurrent validity between the two measurement methods and the level of inter-rater reliability and intra-rater reliability were analyzed. Results: For forty participants, the concurrent validity between Image J and Angles video goniometer showed very high validity with ICC of 0.997(0.995~0.999) and 0.994(0.994~0.998), CVME% 0.71~0.72%, SEM% 0.31~0.34, MDC% 0.86~0.94. The test-retest intra-rater reliability showed very high reliability ICC 0.994(0.991~0.996), CVME% 0.71%, SEM% 0.31~0.43, MDC% 0.86~1.19%. The test-retest inter-rater showed very high reliability ICC 0.995(0.992~0.997), CVME% 0.71%, SEM% 0.43~0.59%, MDC% 1.20~1.62% Conclusions: Angles video goniometer', a smartphone application, is a device with very high reliability and validity for craniovertebral angle measurement in healthy adults, and it is a device that can be easily used in clinical practice.

• Journal of Korean Foot and Ankle Society
• /
• v.28 no.2
• /
• pp.60-67
• /
• 2024

Purpose: Sinus tarsi syndrome (STS) is caused by various pathologies. However, the exact etiology of STS remains controversial. This study evaluated the imaging and arthroscopic findings of patients who underwent surgical treatment after conservative treatment for STS failed. Materials and Methods: Between December 2014 and August 2018, 20 patients (21 cases) who underwent surgical treatment for STS were included in the study. The clinical results were analyzed using the visual analog scale (VAS) and the American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot functional scale. The radiographic results were analyzed using Meary's angle, calcaneal pitch angle, and hindfoot alignment angle. The pathologic conditions of sinus tarsi were confirmed by magnetic resonance imaging (MRI) and subtalar arthroscopy. Synovitis, bone edema, and accessory anterolateral talar facet (AALTF) were evaluated on MRI. Synovial thickening, cartilage damage, interosseous talocalcaneal ligament (ITCL) and cervical ligament rupture, soft tissue impingement, AALTF, and accessory talar facet impingement (ATFI) were evaluated by subtalar arthroscopy. Results: The mean duration of symptoms was 28.7 months (4~120). All patients showed significant improvement in the VAS and AOFAS ankle-hindfoot scale. Significant improvements in hindfoot alignment angle and Meary's angle postoperatively were noted in patients who underwent medial displacement calcaneal osteotomy. MRI confirmed synovitis in all patients, AALTF in 19 cases (90.5%), and ATFI with bone edema in seven cases (33.3%). In subtalar arthroscopy, pathologic conditions were observed in the following order: synovitis in 21 cases (100%), AALTF in 20 cases (95.2%), ITCL partial rupture in nine cases (42.9%), and soft tissue impingement in seven cases (33.3%). All cases had two or more pathological conditions, and 15 (71.4%) had three or more. Conclusion: In cases of STS that do not respond to conservative treatment, a comprehensive examination of the lesions of the tarsal sinus and lesions around the subtalar joint is essential.

• Physical Therapy Korea
• /
• v.23 no.2
• /
• pp.57-66
• /
• 2016

Background: For the treatment of forward head posture (FHP) and forward shoulder posture, methods for strengthening scapular retractors and deep cervical flexors and stretching pectoralis and upper cervical extensors are generally used. No study has yet assessed whether suboccipital release (SR) followed by cranio-cervical flexion exercise (CCFE) (SR-CCFE) will result in a positive change in the shoulders and neck, showing a "downstream" effect. Objects: The purpose of this study was to investigate the immediate effects of SR-CCFE on craniovertebral angle (CVA), shoulder abduction range of motion (ROM), shoulder pain, and muscle activities of upper trapezius (UT), lower trapezius (LT), and serratus anterior (SA) and LT/UT and SA/UT muscle activity ratios during maximal shoulder abduction in subjects with FHP. Methods: In total, 19 subjects (7 males, 12 females) with FHP were recruited. The subject performed the fifth phase of CCFE immediately after receiving SR. CVA, shoulder abduction ROM, shoulder pain, muscle activities of UT, LT, and SA, and LT/UT and SA/UT muscle activity ratios during maximal shoulder abduction were measured immediately after SR-CCFE. A paired t-test and Wilcoxon signed-rank test were used to determine the significance of differences in scores between pre- and post-intervention in the same group. Results: The CVA (p<.001) and shoulder abduction ROM (p<.001) were increased significantly post-versus pre-intervention. Shoulder pain was decreased significantly (p<.001), and LT (p<.05) and SA (p<.05) muscle activities were increased significantly post- versus pre-intervention. The LT/UT muscle activity ratio was increased significantly post- versus pre-intervention (p<.05). However, there was no significant change in UT muscle activity and SA/UT muscle activity ratio between pre- and post-intervention (p>.05). Conclusion: SR-CCFE was an effective intervention to improve FHP and induce downstream effect from the neck to the trunk and shoulders in subjects with FHP.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.4
• /
• pp.450-457
• /
• 2019

Objective : Anterior cervical discectomy and fusion (ACDF) is commonly used surgical procedure for cervical degenerative disease. Among the various intervertebral spacers, the use of allografts is increasing due to its advantages such as no harvest site complications and low rate of subsidence. Although subsidence is a rare complication, graft collapse is often observed in the follow-up period. Graft collapse is defined as a significant graft height loss without subsidence, which can lead to clinical deterioration due to foraminal re-stenosis or segmental kyphosis. However, studies about the collapse of allografts are very limited. In this study, we evaluated risk factors associated with graft collapse. Methods : We retrospectively reviewed 33 patients who underwent two level ACDF with anterior plating using allogenous bone graft from January 2013 to June 2017. Various factors related to cervical sagittal alignment were measured preoperatively (PRE), postoperatively (POST), and last follow-up. The collapse was defined as the ratio of decrement from POST disc height to follow-up disc height. We also defined significant collapses as disc heights that were decreased by 30% or more after surgery. The intraoperative distraction was defined as the ratio of increment from PRE disc height to POST disc height. Results : The subsidence rate was 4.5% and graft collapse rate was 28.8%. The pseudarthrosis rate was 16.7% and there was no association between pseudarthrosis and graft collapse. Among the collapse-related risk factors, pre-operative segmental angle (p=0.047) and intra-operative distraction (p=0.003) were significantly related to allograft collapse. The cut-off value of intraoperative distraction ${\geq}37.3%$ was significantly associated with collapse (p=0.009; odds ratio, 4.622; 95% confidence interval, 1.470-14.531). The average time of events were as follows: collapse, $5.8{\pm}5.7months$; subsidence, $0.99{\pm}0.50months$; and instrument failure, $9.13{\pm}0.50months$. Conclusion : We experienced a higher frequency rate of collapse than subsidence in ACDF using an allograft. Of the various preoperative factors, intra-operative distraction was the most predictable factor of the allograft collapse. This was especially true when the intraoperative distraction was more than 37%, in which case the occurrence of graft collapse increased 4.6 times. We also found that instrument failure occurs only after the allograft collapse.

• Journal of radiological science and technology
• /
• v.28 no.4
• /
• pp.327-332
• /
• 2005

The purpose of this Study was to investigate the prevalence rate of idiopathic scoliosis to the students from the elementary to the university in S city of Chung-Nam using 100 mm Mirror Camera radiation indirect examination units, with on age range of between eight and thirteen (1.526 subjects), fourteen and sixteen (462 subjects), seventeen and eighteen (291 subjects), nineteen and twenty four(508 subjects) and total of 2,787 participants with the 590 male subjects and 2,197 female subjects. The results of this study can be summarized and compared the primary examination with the secondary test of greater than $10^{\circ}$of Cobb's Angle were obtained as follows; 1. Indirect Examination were conducted to find idiopathic scoliosis amomg total 2.787 subjects, 257 subjects (9.2%) who showed positive sign greater than $10^{\circ}$in the Cobb's Angle ; below age of thirteen (132 subjects), between fourteen and sixteen (52 subjects), seventeen and eighteen (35 subjects), nineteen and twenty four (38 subjects). The $x^2-test$ analysis of Indirect Examination showed no statistical significant difference association between the age range and $10^{\circ}$Cobb's Angle of spinal curve(P>0.059). 2. The numbers of idiopathic scoliosis of greater than $10^{\circ}$Cobb's Angle of spinal curve in the primary examination were observed in 147 subjects (57.2%) at the Thoracolumbar region, 81subjects (31.5%) at the Thoracic region, 20 subjects (7.8%) at the Cervicothoracic region, 7 subjects (2.7%) at the Lumbar region, 2 subjects (0.8%) at the Cervical region. So, the large numbers were Thoracolumbar region, 183 participants (71.2%) showed the right side curve of scoliosis and 74 participant (28.8%) showed the left side curve of scoliosis. 3. The main region of the pain in one's own self more than $10^{\circ}$ Cobb's angle of spinal curve were no pain 219 subjects (85.2%), 18 subjects (7.0%) at the Lumbar region, 9 subjects (3.5%) at the Cervical region, 7 subjects (2.7%) at the Thoracic region, 2 subjects (0.7%) at the shoulder girdle region, 1 subjects (0.39%) at the pelvis and whole body region. There was statistical significant difference association between the Cobb's Angle of spinal curve and the main pain region of one's (P<0.006). This study may be significant to an early stage investigate of the prevalence rate of idiopathic scoliosis in the juveniles using 100 mm Mirror Camera radiation indirect examination units. The results of this study help that the students in a stage on growth the basis of data early discovery and therapy of idiopathic scoliosis.

• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.4
• /
• pp.195-202
• /
• 2013

Objectives This study was designed to investigate the correlation between the forward head posture and the spinal alignment. Methods We examined the whole spine x-rays of the 144 student sample. We measured the Craniovertebral angle (CVA), Cervical angle (CA), Thoracic kyphotic angle (TKA), lumbar lordosis angle (LLA) and Ferguson's angle (FA) of the students. We then analyzed the relationship between these angles. Results CVA had correlation with CA, but it was weak. There was significant correlation between CVA and TKA. There were no significant correlation among CVA, LLA and FA. Conclusions According to above results, there is a negative relationship between the CVA and the TKA - in that higher CVAs yielded lower TKAs. But CVA had no significant correlation with LLA or FA.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.67-75
• /
• 1999

The use of composite restorative materials is established due to continuing improvements in the materials and restorative techniques. Composite resins are widely used for the restoration of cervical lesions because of esthetics, good physical properties and working time. There are several types of cavity design for class V composite resin filling, but inappropriate cavity form may affect bonding failure, microleakage and fracture during mastication. Cavity preparations for composite materials should be as conservative as possible. The extent of the preparation is usually determined by the size, shape, and location of the defect. The design of the cavity preparation to receive a composite restoration may vary depending on several factors. In this study, 5 types of class V cavity were prepared on each maxillary central incisor. The types are; 1) V-shape, 2) round(U) shape, 3) box form, 4) box form with incisal bevel and 5) box form with incisal bevel and grooves for axial line angles. After restoration, in order to observe the concentration of stress at bonding surfaces of teeth and restorations, developing a 2-dimensional finite element model of labiopalatal section in tooth, surrounding bone, periodontal ligament and gingiva, based on the measurements by Wheeler, loading force from direction of 45 degrees from lingual side near the incisal edge was applied. This study analysed Von Mises stress with SuperSap finite element analysis program(Algor Interactive System, Inc.). The results were as follows : 1. Stress concentration was prevalent at tooth-resin bonding surface of cervical side on each model. 2. In model 2 without line angle, stress was distributed evenly. 3. Preparing bevel eliminated stress concentration much or less at line angle. 4. Model with round-shape distributed stress concentration more evenly than box-type model with sharp line angle, therefore decreased possibility of fracture. 5. Adding grooves to line angles had no effect of decreasing stress concentration to the area.

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.20-29
• /
• 2006

The purpose of this study was to analyze the stress distribution aspect of unrestored and restored combined shape (wedge shape occulusally and saucer shape gingivally) class V cavity, which found frequently in clinical cases. A maxillary second permolar restored with a combined shape class V composite restorations were modeled using the three dimensional finite element method. Static occlusal load of 170 N was applied on lingual incline of buccal cusp at the angle of $45^{\circ}$ with the longitudinal axis of the tooth. And three dimensional finite element analysis was taken by ANSYS (Version 6.0, Swanson Analysis System Co., Houston, U.S.A) program which represent the stress distribution on unrestored and restored cavity wall and margin. The conclusions were as follows. 1. Compared to the unrestored cavity, Von Mises stress at the cementoenamel junction and line angle of the cavity base were reduced and in restored cavity. 2. Von Mises stress at the occlusal and cervical cavity margin and wall were increased in restored cavity in comparison with the unrestored cavity. 3. In the hybrid and hybrid/flowable composite resin restoration, Von Mises stress at the cementoenamel junction and line angle of the cavity base were reduced more than in the flowable restoration. 4. In the hybrid and hybrid/flowable composite resin restoration, Von Mises stress at the occlusal and cervical cavity margin and wall were increased more than in the flowable restoration.

• The Journal of Korean Physical Therapy
• /
• v.29 no.4
• /
• pp.153-157
• /
• 2017

Purpose: The purpose of this study was to investigate the effect of self-postural control on foot pressure in subjects with forward head posture. Methods: Forty-two healthy adults were recruited in this study. Participants were divided into two groups: The forward-head postural (FHP) group (craniovertebral angle<$53^{\circ}$, n=22) and the control group (craniovertebral angle${\geq}53^{\circ}$, n=20). In the FHP group, foot pressure was measured using three different standing postures: Comfortable standing posture (CSP), subjective neutral standing posture (SNSP), and neutral standing posture with visual feedback (NSP-VP). Each position was performed in random order. In the control group, foot pressure was measured only using the comfortable standing posture. Results: With respect to CSP and SNSP, there was a significant difference on heel pressure between the two groups (p<0.05). Regarding NSP-VP, however, there was no significant differences on heel pressure between the two groups (p>0.05). Conclusion: We suggest that cervical posture control using visual feedback has a positive effect on the distribution of foot pressure in subjects with forward head posture.