• Journal of Oral Medicine and Pain
• /
• v.16 no.1
• /
• pp.33-72
• /
• 1991

The purpose of this study was to investigate the stress distribution and the displacement in the temporomandibular joints following the teeth loss patterns. The three dimensional finite element method was used for a mathematical model. The finite element model was composed of 1,632 elements and 2,411 nodes in the mandible with articular disc and mandibular fossa of the temporal bone. The masseter, the temporal and the internal pterygoid muscle forces were applied at each insertion site, bisecting point of gonion and antegonion, tip of the coronoid process, and gonion at the ration of 2:2:1 respectively. The directions of muscles force were obtained from frontal and lateral cephalometric tracings using bony landmarks of the skull. The results were as follows : 1. In control model, the minimum principal stresses were concentrated on the region of anterosuperior part of the condyle head and articular disc, and maximum principal stresses on the anterior part of the condyle head and posterolateral part of the articular disc. 2. In case of unilateral teeth loss, the greater principal stress appeared at the teeth loss side and the principal stresses increased at the teeth loss side as the number of the posterior teeth loss went up. 3. In case of bilateral teeth loss, the principal stresses were greater than those of the control model and as the number of the posterior teeth loss increased, the grater principal stresses on the temporomandibular joints appeared at the both side. 4. When the posterior teeth existed bilateral, the principal stress patterns were similar to those of the control model. 5. The displacement ws directed mainly upward and backward in the upper part of the temporomandibular joints and upward and forward in the largest part of the condyle head. The displacement increased as the number of the posterior teeth loss went up.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.2
• /
• pp.141-147
• /
• 2007

The purpose of this study was to evaluate the effects of maxillary occlusal plane angle to postoperative skeletal stability by comparative analysis after two-jaw surgery of patients with skeletal CIII malocclusion. This study was made with lateral cephalometric radiography of 52 patients with skeletal class III malocclusion that were performed to Le Fort I osteotomy and BSSRO. And 52 patients were divided to Group A(n=30) and B(n=22). Maxillary posterior impaction was not conducted in Group A, which the pre-operative maxillary occlusal plane angle was in a normal range, and for Group B, which the pre-operative maxillary occlusal plane was low, the maxillary posterior impaction was conducted. The results were obtained as follows : 1. The relapse rate of Group A, which the pre-operative maxillary occlusal plane angle was in a normal range, was relatively stable compared to Group B, which the pre-operative maxillary occlusal plane was low. 2. The relapse rate of each measurement of Group B, which had the maxillary occlusal plane altered during the operation, was somewhat high, and of those, the post-operative relapse rate of overjet, overbite, mandibular plane angle appeared to be significantly high in the statistics. The analyzed results above, was thought to be indicating that the pre-operative maxillary occlusal plane angle was closely related to the post-operative skeletal stability, and that obtaining post-operative skeletal stability only through operative normalization of occlusal plane angle may meet limitations.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.622-625
• /
• 2008

Purpose: In the past, laymen or beauty parlor employees commonly injected people with unproven foreign material such as paraffin, silicone, and cooking oil. We have treated a patient who injected foreign material into her face and neck. Methods: For the last 20 years, a 43-year-old woman has been injecting herself in the face and neck with foreign material. There was no tenderness, erythema, pain, ulceration, or necrosis. However many visible, touchable subcutaneous masses were found. Her face was extremely ugly and disfigured by the foreign material. We could not recognize the boundary between her neck and mandible. The occipital scalp drooped extremely. Over the past 3 years, from February 2005 to October 2007, we performed 15 operations. Results: We conducted a cephalometric facial analysis to compare preoperative and postoperative facial diameter. The patient's upper face diameter decreased from 67 cm to 60 cm, the mid face diameter from 82 cm to 59 cm, the lower face diameter from 63 cm to 50 cm, and the neck circumference diameter from 53 cm to 44 cm, respectively. The mid sagittal diameter decreased from 26 cm to 23 cm. The total excised tissue weight was 4023.7 gram after 15 operations. Conclusion: Serial excision of face and neck masses in a patient who injected herself with foreign material resulted in a satisfactory outcome.

• Journal of Yeungnam Medical Science
• /
• v.5 no.1
• /
• pp.127-133
• /
• 1988

Two patients, sought treatment for chief complaints of protruding frontal tooth and desired treatment to reduce the prominance of lips, were diagnosed as bimaxillary protrusion via clinical and cephalometric analysis. The authors corrected them by combined surgical and orthodonic treatment. As pre-surgical survey, paper and cast surgery were performed and wafer and resin sprint were constructed. We performed anterior maxillary and mandibular osteotomies in first premolar site to retract the maxillary and mandibular dentoalveolar segment in order to ; 1) decrease prominance of upper and lower lips. 2) create proper lower incisor intrusion. By use of intrtamaxillary fixation, prompt oral intake was possible. We made good result of esthetic improvement and there was no evidence of relapse and any complication.

• The korean journal of orthodontics
• /
• v.42 no.4
• /
• pp.190-200
• /
• 2012

Objective: The displacement of the hyoid bone (HB) is a critical biomechanical component of the swallowing function. The aim of this study was to evaluate the swallowing-induced vertical and horizontal displacements of the HB in subjects with 2 different magnitudes of skeletal Class III malocclusion, by means of real-time, balanced turbo-field-echo (B-TFE) cine-magnetic resonance imaging. Methods: The study population comprised 19 patients with mild skeletal Class III malocclusion, 16 with severe skeletal Class III malocclusion, and 20 with a skeletal Class I relationship. Before the commencement of the study, all subjects underwent cephalometric analysis to identify the nature of skeletal malformations. B-TFE images were obtained for the 4 consecutive stages of deglutition as each patient swallowed 10 mL of water, and the vertical and horizontal displacements of the HB were measured at each stage. Results: At all stages of swallowing, the vertical position of the HB in the severe Class III malocclusion group was significantly lower than those in the mild Class III and Class I malocclusion groups. Similarly, the horizontal displacement of the HB was found to be significantly associated with the severity of malocclusion, i.e., the degree of Class III malocclusion, while the amount of anterior displacement of the HB decreased with an increase in the severity of the Class III deformity. Conclusions: Our findings indicate the existence of a relationship between the magnitude of Class III malocclusion and HB displacement during swallowing.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.4
• /
• pp.407-413
• /
• 2000

To evaluate the stability after orthognathic surgery in cleft lip and palate patients using rigid fixation, 20 patients underwent primary repair in childhood and later developed a jaw deformity and malocclusion that required orthognathic surgery were reviewed. Two groups, one of 10 patients performed Le Fort I osteotomy with sagittal split ramus osteotomy and one of 10 patients with sagittal split ramus osteotomy of the mandible, were evaluated. Each group had unilateral cleft only and all alveolar cleft sites had been grafted with autogeneous bone before the orthognathic surgery. The amount of surgical movement and relapse were compared in both horizontal and vertical dimensions. Two-jaw surgery group was more stable than mandibular surgery only group in mandibular position (p< 0.05). Statistically significant relapse was observed in mandibular skeletal point in mandibular surgery group (p<0.05). There was no statistically significant relapse in the skeletal point of two-jaw surgery group. However, the correlation between the horizontal surgical movement and relapse was detected (r = 0.88). This correlation indicates the need of overcorrection. The presence of scar tissues and relatively deficient maxillary bone could be attributed to this close relation between the surgical change and relapse.

• Journal of Korean Dental Science
• /
• v.7 no.1
• /
• pp.16-24
• /
• 2014

Purpose: This study was planned to clarify a negative view of chewing gum due to the concern that continuous gum chewing might cause a change in the gonial angle and make the lower facial appearance look square. Materials and Methods: We had 25 adults (13 males and 12 females, with an average of 27.3 years) chew 6 g of gum (spearmint) evenly with both right and left posterior teeth for one hour per day for three months. We then measured their gonial angle, the inclination of occlusal plane, facial height, bone marrow density, and masticatory force before chewing, 1, 2, and 3 month after chewing to verify its significance statistically. Result: The results showed that the gonial angle increased from $122.7^{\circ}$ to $123.3^{\circ}$ (P>0.05), and thus the jaws became slightly slimmer. There was no change in the occlusal plane inclination and facial height. Meanwhile bone marrow density in the mandibular angle and ascending ramus increased from $0.285g/cm^2$ to $0.290g/cm^2$ (P<0.05), and masticatory force also increased by 0.5 kg on the right side and 0.8 kg on the left side (P<0.05). Conclusion: Continuous chewing of gum gives an appropriate exercise effect to the stomatognathic system. As chewing gum has effect on increase bone marrow density without changing the mandibular angle and facial appearance the claim that jaw bone changes to a square jaw through chewing gum is regarded to be groundless.

• Journal of Korean Dental Science
• /
• v.13 no.1
• /
• pp.11-20
• /
• 2020

Purpose: This study sought to identify differences in hard and soft tissue chin profile changes in skeletal Class III patients after bimaxillary surgery, with or without advancement genioplasty. Materials and Methods: The retrospective study was conducted based on cephalometric analysis of skeletal and soft tissue variables. Lateral cephalograms taken at 3 different time points were utilized: pre-operation (T0), immediately post-operation (T1), and at least 6 months (11.0±2.6 months) post-operation (T2). The 2 groups were matched for sample size (n=20 each). Data were analyzed using independent t-tests with Bonferroni correction. Result: Group N (bimaxillary surgery alone) and Group G (bimaxillary surgery with an advancement genioplasty by horizontal sliding osteotomy) did not differ significantly in terms of demographic characteristics. The soft tissue chin thickness of Group G increased more after surgery, followed by a greater decrease during the postoperative period, and was eventually not significantly different from Group N at T2. On the other hand, the mentolabial sulcus depth of Group G (5.5±1.3 mm) was significantly greater than that of Group N (4.4±0.9 mm) (P=0.006) at T2. Conclusion: Although Group G showed a statistically significantly greater decrease in soft tissue chin thickness during the postoperative period, there were no significant intergroup differences in the chin profile for at least 6 months after the surgery, except for the mentolabial sulcus depth, which was greater in Group G than in Group N.

• The korean journal of orthodontics
• /
• v.45 no.1
• /
• pp.38-46
• /
• 2015

Objective: This prospective clinical study aims to determine the differences between two treatment modalities for anterior open bite in growing patients. The treatment modalities involved the use of magnetic bite-blocks (MBBs) or rapid molar intruders (RMIs) applied with posterior bite-blocks. Methods: Fifteen consecutive patients with a mean age of 11.2 (standard deviation [SD] = 1.6) years and a mean open bite of -3.9 mm were treated with MBBs. Another 15 consecutive patients with a mean age of 10.9 (SD = 1.8) years and a mean open bite of -3.8 mm were treated with RMIs applied on bite-blocks. Cephalometric radiographs were obtained before (T1) and immediately after appliance removal (T2). The treatments lasted four months, during which the appliances were cemented to the teeth. The morphological changes were measured in each group and compared using logistic regression analysis. Results: The MBB group exhibited significantly greater decreases in SNA angle, ANB angle, overjet, and maxillary incisor angle (p < 0.05). The MBBs induced greater effects on the maxilla and maxillary dentition. The MBBs restrained maxillary forward growth and retracted the maxillary incisors more effectively than did the RMIs. Consequently, changes in the intermaxillary relationships and overjets were more distinct in the MBB group. Conclusions: The anteroposterior differences between the appliances suggest that MBBs should be preferred for the treatment of patients with Class II open bites and maxillary incisor protrusions.

• The korean journal of orthodontics
• /
• v.45 no.1
• /
• pp.3-12
• /
• 2015

Objective: We compared the skeletal and dental changes that resulted from the use of two methods of intermaxillary fixation (IMF)-miniscrews and surgical archwire-in 74 adult patients who had Class III malocclusion and were treated with the same orthognathic surgical procedure at a hospital in Korea. Methods: All the patients underwent Le Fort I osteotomy and bilateral sagittal split ramus osteotomy with rigid fixation. They were divided into two groups according to the type of IMF used-group 1 underwent surgical archwire fixation and group 2 underwent orthodontic miniscrew fixation. In a series of cephalograms for each patient, we compared vertical and horizontal tooth-position measurements: (a) immediately after surgery ($T_0$), (b) 3 months after surgery ($T_1$), and (c) 6 months after surgery ($T_2$). Cephalometric changes within each group were examined using one-way analysis of variance (ANOVA) while the independent samples t -test procedure was used to compare the two groups. Results: After surgery, the maxillary incisors tended to be proclined in both groups although there were no significant differences. Incisor overbite increased significantly in both groups from $T_0$ to $T_1$, and the miniscrew group (group 2) showed slightly greater overbite than the archwire group (group 1). Conclusions: This study suggest that the use of orthodontic miniscrews and orthodontic surgical archwire for IMF in adult patients results in similar skeletal and dental changes.