• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.109-121
• /
• 1992

Temporomandibular joint is a major structure to play an important role in the function & stability of the occlusion as well as the stomatognathic system. Therefore, the TMJ is the structure that requires the complete analysis for diagnosing and planning treatment of pathologic changes by TMJ dysfunction and malocclusion. So, in this study, to evaluate TMJ situation in Korean malocclusion, based on the previous accomplishments, students of the dental college of Won-Kwang Univ. are surveyed and selected in terms of Angle's classification of malocclusion, whose TMJ radiographs were taken in the centric occlusion and centric relation. In each maiocclusion groups, the mean and standard deviation of anterior, posterior and superior joint space of the right, left and both side in CO & CR are evaluated and also those of the fossa height and the articular eminence angle of the right, left and both sides are evaluated. The obtained results were as follows: 1. In the correlation coefficient between the malocclusion groups, no other items except the posterior joint space of the right side in CR between in class I and class III are significant. 2. In the correlation coefficient between the right and left side, the each joint space in class I malocclusion group and class II malocclusion group are significant. 3. In the change of each joint space during the transmit from CO to CR, there is a tendency of increasing anterior joint space and decreasing posterior, superior joint spaces in class I, II malocclusion and increasing superior joint space and decreasing anterior, posterior joint space in class III malocclusion, which is significant in the correlation coefficient, but not significant in the T-test. 4. In each malocclusion group, the correlation coefficient between the posterior joint space and the superior joint space in C.R is highly significant. 5. The fossa height of class II malocclusion group is lesser than that of class I or class III, which is not significant in T-test. 6. In the correlation coefficient between Rt. and Lt. side in the fossa height, it is not significant in class I and class III group, but significant in class II malocclusion group. 7. The articular eminence angle of class II malocclusion group is larger then that of class I or class III groups, which is fairly significant. 8. In the correlation coefficient between Rt. and Lt. side in the articular eminence angle, it is significant in each malocclusion group.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.255-263
• /
• 2006

Objectives: This article reported three patients developed anterior open bite seemed to be related to TMJ anterior disc dislocation without reduction(ADD WO R), but no evidence of condylar destructive or collapse and analyzed the craniofacial skeletal structure by means of cephalometric analysis. Results: All patients suddenly developed a centric relation/centric occlusion discrepancy, an increased overjet and an anterior open bite following ADD WO R. All patients had Angle's Class I occlusion and shallow bite, but they had skeletally Class III and Class II pattern and all were vertically significant hyperdivergent type. Conclusions: These 3 patients had characteristics of common facial morphology including:(1)Angle classification Class I and shallow bite,(2)high mandibular plane angle,(3)high gonial angle. Developed anterior open bite resulted from clockwise rotation of the mandible related TMJ ADD WO R, rather than a result from the eruption of posterior teeth. We hypothesize rotation may relate to attached direction of masticatory muscle.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.257-267
• /
• 2020

The goal of suction denture is to enhance retention of dentures by the formation of negative pressure between the denture base and the underlying tissue and sealing around the denture by the mucosa. This patient has been converted to a completely edentulous state after the extraction of residual teeth. Fabrication of suction denture was planned because it was estimated that the conventional compete would be hard to achieve retention due to the absorption of residual ridge and lack of sublingual fold. Through appropriate clinical and laboratory technique such as preliminary impression on the mandibular rest position, provisional vertical dimension determination with Centric Tray^® (Ivoclar Vivadent AG, Schaan, Liechtenstein), closed mouth definitive impression and jaw relation record using individual tray with Gnathometer M^® (Ivoclar Vivadent AG, Schaan, Liechtenstein), artificial teeth arrangement considering stability of the denture, and proper polymerization technique that minimizes polymerization shrinkage, restoring the patient with suction denture resulted in satisfaction throughout the function and asesthetics.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.3
• /
• pp.171-185
• /
• 2000

The treatment objectives of the complete oral rehabilitation are : (1) comfortably functioning temporomandibular joints and stomatognathic musculature, (2) adherence to the basic principle of occlusion advocated by Schuyler, (3) anterior guidance that is in harmony with the envelope of function, (4) restorations that will not violate the patient's neutral zone. There may be many roads to achieving these objectives, but they all convey varing degrees of stress and strain on the dentist and patient. There are no "easy" cases of oral rehabilitation. Time must be taken to think, time must be taken to plan, and time must be taken to perform, since time is the critical element in both success and failure. Moreover, a systematized and integrated approach will lead to a prognosis that is favorable and predictable. This approach facilitates development of optimum oral function, comfort, and esthetics, resulting in a satisfied patient. Such a systematized approach consists of four logical phase : (1) patient evaluation, (2) comprehensive analysis and treatment planning, (3) integrated and systematic reconstruction, and (4) postoperative maintenance. Firstly, we must evaluate the mandibular position. The results of a repetitive, unstrained, nondeflective, nonmanipulated mandibular closure into complete maxillomandibular intercuspation is not so much a "centric" occlusion as it is a stable occlusion. Accordingly, we ought to concern ourselves less with mandibular centricity and more with mandibular stability, which actually is the relationship we are trying to establish. The key to this stability is intercuspal precision. Once neuromuscular passivity has been achieved during an appropriate period of occlusal adjustment and provisionalization, subsequent intercuspal precision becomes the controlling factors in maintaining a stable mandibular position. Secondly, we must evaluate the planned vertical dimension of occlusion in relationship to what may now be an altered(generally diminished), and avoid the hazard of using such an abnormal position to indicate ultimate occlusal contacting points. There are no hard and fast rules to follow, no formulas, and no precise ratios between the vertical dimension of occlusion. Like centric relation, it is an area, not a point.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.839-853
• /
• 1998

The present study was performed to prove the relationship between CO-CR discrepancy and facial skeletal type. In this study, 242 subjects were randomly selected and devided into 9 groups(devided into class I, II, III by ANB and each one devided into dolicho-, brachy-, mesofacial skeleton by Ricketts' vertical index). Lateral cephalometric radiographs with the mandible in centric occlusion were taken and measured and CO and CR bites were registered on all subjects. Diagnostic casts were mounted on Panadent articulator using an estimated face-bow and centric relation bite registration. The amount and direction of CO-CR discrepancy present was recorded using a Condylar Position Indicator(CPI) and a centric occlusion wax bite registration. CPI measurements and cephalometric measurements were statistically analyzed. The finding of this study can be summerized as follows : 1. There is little correlation between right and left sides for magnitude or direction of CO-CR discrepancies. The correlation between the magnitude of CO-CR discrepancy of left A-P and right A-P is higher than that of left S-I and right S-I. 2. Correlation of Class II malocclusion group was higher than that of the other groups between the magnitude of CO-CR discrepancy of left CPI and right CPI. 3. There is no difference between the pattern of CO-CR discrepancy of 9 malocclusion groups. 4. There is very little, if any, correlation between Skeletofacial measurements and CO-CR discrepancy. 5. In Class II brachyfacial skeleton and Class III mesofacial skeleton there was Lateral cephalometric measurements by that we predict CPI measurements was detected. That was overbite, overjet, upper genial angle, lower genial angle, saddle angle, articular angle, convexity of point A, ANS-Me/Na-Me, PCBL/RH, Posterior FH/anterior FH.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.4
• /
• pp.346-351
• /
• 2014

Suction dentures enhance retention and support by forming negative pressure temporarily at the internal surface of denture base at times of swallowing and chewing because the areas surrounding the denture flanges are sealed by mobile mucosa. In this case, an 81-year-old male visited for new dentures. Considering the high expectations for retention and masticatory efficiency of dentures, fabricating complete dentures with suction dentures was planned. Preliminary impression was taken without applying pressure on retromolar pad area and diagnostic cast was fabricated. Afterwards, individual tray was made and final impression was taken, at the same time, gothic arch tracing was done to acquire centric relation and vertical dimension. Then, anatomic teeth were placed on maxilla and non-anatomic teeth were placed on mandible forming lingualized occlusion. Consequently, restoring a complete edentulous patient with complete dentures using mandibular suction denture resulted in recovering satisfying retention and function.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.273-279
• /
• 2016

Severe tooth wear may lead to pathological changes of pulp, imbalance in occlusion as well as functional and esthetic problems. In this case, 34-year-old male came to the hospital because of generally worn dentition due to attrition and erosion. After evaluation, a full mouth restoration with elevation of the vertical dimension of occlusion was planned. After occlusion was stabilized by an occlusal stabilization appliance, centric relation position was recorded and subsequent provisional restorations were fabricated. After evaluation, a CAD-CAM (computer aided design-computer aided manufacturing) prosthetic restoration was carried out using monolithic zirconia. After 12 months of follow up observation, the patient was satisfied with function and esthetic appearance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.291-297
• /
• 2016

Patients with $Sj{\ddot{o}}gren^{\prime}s$ syndrome usually suffer from teeth discoloration and attrition due to xerostomia. If the anterior teeth are badly worn, problems such as loss of anterior guidance, occlusal disharmony, and limited space for restoration may occur. However, ideal occlusion is obtained in both centric and eccentric relation by regaining the disocclusion of the posterior teeth through the anterior and lateral guidance using twin-stage method. In this case, rehabilitation was performed for a $Sj{\ddot{o}}gren^{\prime}s$ syndrome patient with maxillary and mandibular incisor's severe attrition and teeth discoloration by using twin-stage method.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.238-249
• /
• 2005

The contemporary two-jaw surgical approach usually involves a Le Fort osteotomy of the maxilla and a ramal osteotomy of the mandible with 3-dimensional repositioning of the jaws as well as the occlusal planes. After making the surgical treatment plan. the surgical movements are duplicated in the model surgery. During this procedure, reference poings and lines are drawn on the base of the models over the dental arch and sawcuts are mads according to these marked osteotomy lines. This technique, however, has been found to be inexact. especially when the laws are moved in several dimensions simultaneously. To overcome this. different methods have been developed for an accurate repositioning of the jaws as planned. A new appliance. Surgical Jaw Relater, has been devised by th8 author for the simple 3-dimensional relocation of the upper and lower models, resulting in the easy construction of the splints such as centric relation splint, intermediate and final splint. This article describes an introduction and a clinical application of this appliance. Through the application of this system to the orthognathic cases including two-law surgery. it is proved that the row device is very clinically useful.

• The Journal of Korean Academy of Prosthodontics
• /
• v.22 no.1
• /
• pp.72-78
• /
• 1984

The notion that the axis of the shaft of the articulator must coincide the patient's mandibular transverse axis tells us the importance of locating the axis precisely. When using kinematic axis to transfer a cast to an articulator, the anatomic asymmetry of the contralateral points will result in certain distortion when the axis transferred to an articulator where the mechanical axis produces symmetry. In this study, after locating the true hinge axis point with Denar hinge axis locator, the discrepancies between true hinge axis point and arbitrary hinge axis point that was 13mm anterior from the posterior margin of center of trangus to the outer canthus of eye were measured. And the discrepancies between left and right true hinge axis point in the superoinferior and anteroposterior directions were measured. For this study, 20 dental students who have no missing teeth and no difficulties of mandibular movement were selected. Upper and lower cast of subjects were mounted on Denar Mark II articulator uisng Denar Slidematic face-bow and centric relation record for the measurement of discrepancies between left and right true hinge axis points. The results obtained as follows. 1. The mean distance from the arbitrary hinge axis point to the true hinge axis point was as follows. Right: horizontal distance; 1.99mm, vertical distance; 2.12mm, linear distance; 3.36 mm. Left: horizontal distance; 1.39mm, vertical distance; 2.06mm, linear distance; 2.09mm. Total: horizontal distance; 1.69mm, vertical distance; 2.09mm linear distance; 3.06 mm. 2. The 87.5% of true hinge axis points were within 5mm of the arbitrary hinge axis point. 3. The mean discrepancies between the right and left hinge axis point were 2.92mm in superoinferior direction and 4.74mm in anteroposterior direction. 4. When transferring the axis to the articulator, anatomic asymmetry between right: and left axis point produces in dislocation of cast on the articulator, and undesirable shift in esthetic tooth position will be resulted.