• 한국대기환경학회지
• /
• 제10권3호
• /
• pp.175-182
• /
• 1994

Backward trajectory analysis was carried out for 41 cases at 850 hPa level and 47 cases at 700 hPa level during the period from May 1992 to August 1993 in order to understand the impact of long-range transported pollutants from the neighboring countries on the distribution pattern of acid rain in Korea. The occurrence frequencies of acid rain were also investigated using the rainwater data observed at 5 stations in the central part of Korea, Kangwha, Seoul, Yangpyong, Hongchon, and Inje. The trajectory analysis showed that westerlies were dominant on 700 hPa level and southwesterlies on 850 hPa level in Korea. The pH values were also often lower when the trajectory was stagnant in the upper air over Korea. However, pH values were normally higher in all directions of flows during the Yellow Sand Period due to the increase of Positive ion components such as $Ca^{+2}$. The pH values were also normally higher when air flows from north or northeast.

• 환경영향평가
• /
• 제8권1호
• /
• pp.1-16
• /
• 1999

The acid deposition and photochemical modeling study was performed on the Eastern Asia using Regional Acid Deposition Model(RADM). The results of this study show that horizontal distribution of $SO_2$, concentration and dry deposition flux was higher in Beking, Shanghai and central part of Korea. However distribution pattern of sulfate and $O_3$ concentration calculated by RADM were not similar to emission pattern. In daytime, $SO_2$, sulfate and $O_3$ were mixed to whole PBL but in nighttime because of inversion layer these pollutants were suppressed to lower level.

• Carbon letters
• /
• 제8권1호
• /
• pp.25-29
• /
• 2007

The carbon brake discs were manufactured by densification the carbon fiber preform using PG-CVI technology with Propene as a carbon precursor gas and Nitrogen as a carrier gas. The densities of carbon brake discs were tested at different densification time. The results indicate that the densification rate is more rapid before 100 hrs than after 200 hrs. The CTscanning image and the SEM technology were used to observe the inner subtle structure. CT-images show the density distribution in the carbon brake disc clearly. The carbon brake disk made by PG-CVI is not very uniform. There is a density gradient in the bulk. The high-density part in the carbon brake is really located in the friction surface, especially in the part of inner circle. This density distribution is most suitable for the stator disc.

• 센서학회지
• /
• 제14권2호
• /
• pp.85-90
• /
• 2005

In this study, we have fabricated a three branches vertical Hall sensor for detecting three phases rotation informations of miniaturized brushless motor. The sensor gives three position signals phase shifted by $120^{\circ}$, corresponding to the motor driving signals. The branch has one Hall output and one input each other. The central part acts as common driving input. Sensor has branch width of $150{\mu}m$ and distance from central electrode to Hall electrode of $100{\mu}m$. The sensitivity of sensor is 250 V/$A{\cdot}T$ at magnetic field of 0.1 T. It has also showed three sine waves of Hall voltages with $120^{\circ}$ phase over a $360^{\circ}$ rotation. A packaged sensing part are $2{\times}2mm^{2}$ and has been successfully tested on a motor rotation at a speed up to 60,000 rpm.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.99-102
• /
• 1996

The ultimate object of FES is on the recovering function of body and shape demaged from desease or injury to original state. On this study, object is recovering of gait function of the disabled who, especially, have gait disturbance. Paralyzed muscle from the central nerve disable, if peripheral nerves which be in the lower part of the harmed are activated, muscle contraction is possible. The traumatic trouble, peripheral nerves aren't connected to a central nerve but origin of peripheral nerve cells which are in the lower part of the harmed are alive, react on stimulation. We design 4-channel stimulator, being based on standard stimuli pattern. stimulator is manufactured with compact size and light weight to portable.

• 한국연초학회지
• /
• 제35권1호
• /
• pp.13-19
• /
• 2013

The natural ingredient has been utilized variety of the food and medicine. The aromatherapy well known prevent disease and healthy promotion using the essential oil derived extracted plants. In this work, natural ingredient include herb granulated for application of tobacco filter. That used by granulation using fluidized bed granulator(top-spray, bottom-spray and tangential-spray) and wet granule method. According to ingredient can used granulating method selectivity. So, we used fluid-bed granulator and wet granule method. Grapefruit extract coated sugar particle using the bottom-spray method and red ginseng granule granulated red ginseng powder using the tangential-spray method in a fluidized bed. Then, these granules applied the tobacco filter after due consideration add amount and operation efficiency. As a result, wet granule was loaded dual filter because that similarity carbon granule. And it was fitted in added 3mg/mm, per tip in the tobacco end part. Another type, fuidized bed granules was filled cavity filter because it has high hardness, sphere shape.

• 한국연초학회지
• /
• 제36권1호
• /
• pp.1-11
• /
• 2014

Cigarette filters containing Brassica Rapa L. seeds of the dark brown and round shaped were evaluated to determine the effect of seed addition on filter degradability. The seeds with germination capability under the tar/nicotine condition in the preliminary test, were put into the active carbon part of the filter(12mm) during filter rod making by the kit. The $4{\pm}2$ pieces of the seeds were put into the opened fiber bundle of the filter tow. In order to test the germination rate of the seeds, seed filters were placed either in a petri dish or test-pot in a conditioned area ($25^{\circ}C$, 70 % RH). The seed filters were placed outdoors exposed to natural conditions with the periodic water supply. The seeds in the smoked filters showed 90 % germination rate after a month under the open air condition. No significant differences in the sensory evaluation and analysis were obtained when the control sample was compared to the same cigarettes with the seeds.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1623-1624
• /
• 2006

It is a paper for design, manufacture and estimation of industry inkjet head. Simulations for Actuator, Ink flow and Ejection are executed for securing design ability. Relations between droplet and properties of ink are explained closely through simulation for nozzle. Actually, two silicon plates are made by dry and wet etching and directly bonded. PZT materials is attached on the bended ink flow part and cut to $540{\mu}m$ interval by dicing saw. Actuator was seen variation within 10% between simulation and actual head. Through the ejection estimation, it is shown that stabilized driving voltages change according to viscosity and surface tension of metal ink. Using the metal ink of viscosity of 4.8 cps and surface tension of 0.025 N/m, it is possible to eject the stable droplets with 5m/s, 20 pl, 5 kHz.

• 보건행정학회지
• /
• 제2권2호
• /
• pp.33-56
• /
• 1992

The objectives of this research are (i) to review the functional and financial distribution of public health adminstration between central and local governments, (ii) to find out, based on economic criteria, optimal distribution required to fullfil local need for public health, and finally, (iii) to suggest policy implications in health area in face of the newly arising local autonomy system in Korea. Judging from data on government expenditures and tax revenues, public health administration in Korea is highly concentrated into central government, both functionlally and financially. High dependency of public health on central government has often been critisized that local residents can not participate in the decision making process for local health problems. This study, however, shows that localization of public health administration does not necessarily result in efficient and equitable allocation of resource to satisfy local demand for public health. From this point of view, two eccnomic criteria are suggested, i.e. external effect and economies of scle, as distributive criteria of roles in public health administration between local and central government. In addition, superiority of central concentration of public health administration to localization is emphasized in that public health in a wide sense contains the nature of public good and is part of compulsory socil security system. As a consequence, planned intervention by government is desirable.

• Advances in concrete construction
• /
• 제10권6호
• /
• pp.515-526
• /
• 2020

Cold-mixed asphalt mixture is a widely recommended asphalt pavement materials with potentially economic and environmental benefits. Due to the reduction of natural non-renewable mineral resources, powder minerals with similar properties are considered as new mineral fillers in asphalt mixtures. This study explored the feasibility of using cement to replace natural limestone powder (LP) in emulsified asphalt concrete modified by styrene-butadiene styrene copolymer. The experimental tests, including compressive strength, Marshall stability as well as moisture susceptibility test, were used to investigate the mechanical properties, the Marshall stability, flow value, as well as the moisture damage. In addition, the influence of material composition on the performance of asphalt concrete is explained by the microstructure evolution of the pore structure, the interface transition zone (ITZ), and the micromorphology. Due to mineralogical reactivity of cement, its replacement part of LP improved the mechanical properties, Marshall stability, but it will reduce the moisture susceptibility and flow value. This is because with the increase of the cement substitution rate, the pore structure of the asphalt concrete is refined, the width of ITZ becomes smaller, and the microstructure is more compact. In addition, asphalt concrete with a larger nominal particle size (AC-16) has relatively better performance.