• Structural Engineering and Mechanics
• /
• 제45권2호
• /
• pp.201-209
• /
• 2013

A new dynamic reliability analysis of structure under repeated random loads is proposed in this paper. The proposed method is developed based on the idea that the probability density of several times random loads can be derived from the probability density of single-time random load. The reliability prediction models of structure based on time responses under several times random loads with and without strength degradation are obtained by using the stress-strength interference theory and probability density evolution method. The resulting differential equations in the prediction models can be solved by using the forward finite difference method. Then, the probability density functions of strength redundancy of the structures can be obtained. Finally, the structural dynamic reliability can be calculated using integral method. The efficiency of the proposed method is demonstrated numerically through a speed reducer. The results have shown that the proposed method is practicable, feasible and gives reasonably accurate prediction.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.431-434
• /
• 2008

Pratical dispersion-correction scheme is applicated to simulate the distant propagation of tsunami. This scheme is based on the leap-frog finite difference scheme for the linear shallow-water equations. The new scheme has the advantage of using the constant spatial grid size and time step size even in area of variable depths. And this new model constructed by using the 2nd upwind scheme, dynamic linking method, and staggered grid system. This model is simulated to near Sokcho harbor about The Central East Sea Tsunami in 1983. And this result is compared to tide gage and result of former model.

• Journal of Mechanical Science and Technology
• /
• 제17권8호
• /
• pp.1219-1225
• /
• 2003

Acoustic sounds generated by uniform flow around a two-dimensional circular cylinder at Re=150 are simulated by applying the finite difference lattice Boltzmann method. A third-order-accurate up-wind scheme is used for the spatial derivatives. A second-order-accurate Runge-Kutta scheme is also used for time marching. Very small acoustic pressure fluctuation, with same frequency as that of Karman vortex street, is compared with pressure fluctuation around a circular cylinder. The propagation velocity of acoustic sound shows that acoustic approaching the upstream, due to the Doppler effect in uniform flow, slowly propagates. For the downstream, on the other hand, it quickly propagates. It is also apparent that the size of sound pressure is proportional to the central distance ${\gamma}$$\^$-1/2/ of the circular cylinder.

• Journal of the Optical Society of Korea
• /
• 제17권6호
• /
• pp.471-480
• /
• 2013

The beating of two or more lasers that have the same or a finite difference in the central frequencies, is the main source of noise in spectral amplitude coding optical code division multiple access (SAC OCDMA) systems. In this paper we adopt a spatial multiplexing (SM) scheme for SAC OCDMA systems to mitigate this beat noise. The results show that for different code weights and different data rates SM SAC can support a larger number of users than the conventional SAC for all different laser source configurations. However, SM SAC requires a more complex system than the conventional SAC, and almost twice as much optical component.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1502-1505
• /
• 2018

We present a design for hybrid circular Bragg gratings (hCBGs) for efficiently extracting single-photons emitted by InAs quantum dots (QDs) embedded in GaAs. Finite-difference time-domain simulations show that a very high photon collection efficiency (PCE) up to 96% over a 50 nm bandwidth and pronounced Purcell factors up to 19 at cavity resonance are obtained. We also systematically investigate the geometry parameters, including the $SiO_2$ thickness, grating period, gap width and the central disk radius, to improve the device performances. Finally, the PCEs and the Purcell factors of QDs located at different positions of the hCBG are studied, and the results show great robustness against uncertainties in the location of the QD.

• 대한치과교정학회지
• /
• 제29권4호
• /
• pp.411-424
• /
• 1999

Utility arch wire를 이용한 상악 4절치 압하시 중절치와 측절치의 초기 응력 분포를 알아보기 위하여 컴퓨터 단층 촬영된 정상 교합자의 치아 사진으로부터 유한요소 모델을 만든 후 beam요소로 만든 utility arch wire의 구치부에 $45^{\circ}$ tipback을 부여하고 전치부에 $5^{\circ},\;10^{\circ},\;15^{\circ}$ crown lingual torque를 부여하여 activation한 후 치아와 치근막 유한요소 모델에 적용하여 해를 구한 다음 중절치와 측절치의 치경부, 치근 중간부, 치근첨부의 세 부분에서 초기 응력분포를 조사하여 다음과 같은 결론을 얻었다. 1. 중절치는 $5^{\circ},\;10^{\circ},\;15^{\circ}$ activation 했을 때 치경부의 원심 구개측과 치근첨의 근심 순측에서는 압축이, 치경부의 근심순측과 치근첨의 원심 구개측에서 약한 인장이 나타나는 양상이 각각의 경우에 거의 비슷하게 나타났다. 주응력의 크기 또한 거의 비슷하였다. 그러나 $10^{\circ}$ activation 했을 때 그 양상이 가장 강하였다. 2. 측절치는 $5^{\circ},\;10^{\circ},\;15^{\circ}$ activation했을 때 치경부의 순측과 치근 첨부의 구개측에서 압축이 치경부의 구개측과 치근첨부의 순측에서 인장이 나타나는 양상이 각각의 경우에 거의 비슷하게 나타났다. 그러나 $10^{\circ}$ activation했을 때 그 양상이 가장 강하였다.

• 대한치과보철학회지
• /
• 제44권1호
• /
• pp.85-102
• /
• 2006

Statement of problem: Currently, there are some 20 different geometric variations in implant/abutment interface available. The geometry is important because it is one of the primary determinants of joint strength, joint stability, locational and rotational stability. Purpose: As the effects of the various implant-abutment connections and the prosthesis height variation on stress distribution are not yet examined this study is to focus on the different types of implant-abutment connection and the prosthesis height using three dimensional finite element analysis. Material and method. The models were constructed with ITI, 3i TG, Bicon, Frialit-2 fixtures and solid abutment, TG post, Bicon post, EstheticBase abutment respectively. And the super structures were constructed as mandibular second premolar shapes with 8.5 mm, 11 mm, 13.5 mm of crown height. In each model, 244 N of vertical load and 244 N of $30^{\circ}$ oblique load were placed on the central pit of an occlusal surface. von Mises stresses were recorded and compared in the crowns, abutments, fixtures. Results: 1. Under the oblique loading, von Mises stresses were larger in the crown, abutment, fixture compared to the vertical loading condition. 2. The stresses were increased proportionally to the crown height under oblique loading but showed little differences with three different crown heights under vertical loading. 3. In the crown, the highest stress areas were loading points under vertical loading, and the finish lines under oblique loading. 4. Under the oblique loading, the higher stresses were located in the fixture/abutment interface of the Bicon and Frialit-2 systems compared to the ITI and TG systems. Conclusions: The stress distribution patterns of each implant-abutment system had difference among them and adequate crown height/implant ratio was important to reduce the stresses around the implants.

• Computers and Concrete
• /
• 제26권4호
• /
• pp.343-350
• /
• 2020

Concrete-filled steel tubular (CFST) members have been widely used in engineering, and their tube diameters have become larger and larger. But there is no research on the thermal field of large-diameter CFST structure. These studies focused on the thermal field of the large-diameter CFST structure under solar radiation. The environmental factors and the actual placement position were considered, and the finite element model (FEM) of the thermal field of CFST members under solar radiation (SR) was established. Then the FEM was verified by practical experiments. The most unfavorable temperature gradient model in the cross-section was proposed. The testing results showed that the temperature field of the large-diameter CFST member section was non-linearly distributed due to the influence of SR. The temperature field results of CFST members with different pipe diameters indicated that the larger the core concrete diameter was, the slower the central temperature changed, and there was a significant temperature difference between the center and the boundary. Based on the numerical model, the most unfavorable temperature gradient model in the section was proposed. The model showed that the temperature difference around the center of the circle is small, and the boundary temperature difference is significant. The maximum temperature difference is 15.22℃, which appeared in the southern boundary area of the specimen. Therefore, it is necessary to consider the influence of SR on the thermal field of the member for large-diameter CFST members in actual engineering, which causes a large temperature gradient in the member.

• 구강회복응용과학지
• /
• 제26권2호
• /
• pp.179-195
• /
• 2010

임플란트 보철물에 저작력 등 외부 하중이 작용하면 내부 반응으로 응력이 발생되는데 지지골에 나타난 응력은 골재생 및 흡수 파괴, 임플란트에 나타난 응력은 임플란트 자체의 파절이나 나사의 풀림현상 및 파절, 상부 구조물에 나타난 응력은 보철물의 파절 등을 예견하는 지침이 될 수 있을 것이다. 지대주의 형상과 재질에 따라 연결방법과 보철방법이 달라지고 임플란트 내부의 하중전달 기전이 변하게 되고 이에 따라 악골에 발생하는 응력분포 역시 달라질 수 있다. 본 연구에서는 하악 제 1대구치 부위에 이중나사 구조를 갖고 원추형 내측연결 임플란트 시스템인 GSII$^{(R)}$ (Osstem, Korea)임플란트를 이용해 지대주의 종류를 티타늄 소재의 2-piece Transfer$^{TM}$ abutment (GST), 금합금 소재의 2-piece GoldCast$^{TM}$ abutment(GSG), 외부 연결형태를 가진 3-piece Convertible$^{TM}$ abutment (GSC) 로 분류하여 이에 따른 응력분포 양상을 비교 분석하여 보았다. 결과 하중조건에 관계없이 응력은 주로 지대주와 고정체가 접촉하는 경부에 집중되었다. 또한 하중조건에 관계없이 임플란트의 고정체 상부와 접촉하는 치밀골에 높은 응력이 나타나고 해면골에는 아주 작은 응력이 나타났다. 축하중보다는 중심축을 벗어난 하중조건에서 더 높은 응력이 발생되었고 수직하중보다 경사하중에서 더 높은 응력이 발생되었다. 전체에 걸친 최대응력은 GSG에서는 지대주, 치관 및 고정체에 고르게 분포되었고 GST는 주로 고정체와 지대주 나사에, GSC는 고정체와 지대주에 집중되었다. 세 지대주 간 골내의 최대응력에는 유의한 차이가 없었고 GSG가 전체 구성부의 응력분포에 있어 유리한 것으로 나타났다.

• 한국광학회지
• /
• 제14권2호
• /
• pp.135-141
• /
• 2003

양의 열광학 계수를 갖는 실리카를 하부클래드 및 코아에 그리고 음의 열광학 계수를 갖는 폴리머를 상부클래드에 적용한 AWG(Arrayed Waveguide Grating) 파장분할 다중화 소자에 대하여 이차원 스칼라 유한차분법(Scalar Finite Difference Method; SFDM)으로 온도의존 특성을 분석한 결과, 클래드의 굴절률을 변화시키거나 실리카 코어 상부에 실리카 박막이 존재하는 구조에서 박막의 두께를 변화시켜 온도의존 특성을 조절할 수 있음을 확인하였다. 이러한 해석결과에 근거하여 폴리머 상부클래드가 적용된 AWG 소자를 제작하였으며 기존의 실리카 AWG 소자와 특성을 비교분석하였다. 폴리머 상부클래드의 도입에 의해 삽입손실 및 크로스톡은 큰 변화가 없었으나 중심파장의 온도의존성은 0.0130 nm/$^{\circ}C$에서 0.0028 nm/$^{\circ}C$ 수준으로 감소하였다.