• Title/Summary/Keyword: center point

Search Result 5,008, Processing Time 0.039 seconds

Analysis and Optimization of Design Parameters in a Cold Cross Rolling Process using a Response Surface Method (반응표면법을 이용한 냉간전조압연공정 설계변수의 영향도 분석 밑 설계최적화)

  • Lee, H.W.;Lee, G.A;Choi, S.;Yoon, D.J.;Lim, S.J.;Lee, Y.S.
    • Transactions of Materials Processing
    • /
    • v.15 no.8 s.89
    • /
    • pp.550-555
    • /
    • 2006
  • In this study, effects of forming angle and friction coefficient on a initiation of the Mannesmann hole defect were analyzed by using a response surface method. The maximum effective plastic strain at center point of specimen is utilized for the prediction of the starting point of crack occurrence, which is suggested by the comparison of integrals of four different ductile fracture models between the histories of the effective plastic strain at center point. It was revealed that the principal stress at the center is the dominant element to the increase of the effective plastic strain. It was also verified by the simulation results from the comparison of experiment and simulation. It is provided that the forming angle of 25 degrees and the spreading angle of 1 degree can be a proper design condition without an occurrence of internal hole defect and an excessive slip.

A Comparative Analysis of Stress Distribution in the Implant Supporting Bone by Occlusal Loading location Utilizing the Finite Element Method (유한요소법을 이용한 교합 하중 위치에 따른 임플란트 지지골의 응력분포 비교분석)

  • Lee, Myung-Kon;Kim, Young-Jick;Kim, Chi-Young
    • Journal of Technologic Dentistry
    • /
    • v.27 no.1
    • /
    • pp.105-113
    • /
    • 2005
  • The purpose of this study is to evaluate the effect of loading at three different occlusal surface position of the gold alloy crown on the stress distributions in surrounding bone, utilizing 3-dimensional finite element method. A three dimensional finite element model of an implant with simplified gold alloy crown and supporting bone was developed for this study. A oblique or vertical load of 100 N was applied at the following position at each FE model : 1) center of occlusal surface, 2) a point on the buccal side away from center of occlusal surface (COS) by 2.8mm, 3) a point on the lingual side away from COS by 2.8mm. In the results, Minimum von Mises stresses under vertical load or oblique load of 100N were about 6MPa at the center of occlusal surface and about 40MPa at the point on the buccal side, respectively. From the results we could come to the conclusion that occlusive loading position could be an important factor for establishment of structural safety of supporting bone.

  • PDF

Body Surface Changes at Armhole Area for the Pattern of Armhole Line (진동둘레선 설계를 위한 진동체표변화에 관한 연구)

  • 이정란;임원자
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.20 no.5
    • /
    • pp.930-942
    • /
    • 1996
  • This study was done to provide the characteristics of body surface changes at armhole area. Experiments were carried out at upper arm and upper body inchuding 67 items, 74 segments by the stanard posture and arm movements. The subjects were 15 females of twenty aged. The major conclusions of this study are; 1. On the circumference items of upper arm, armhole circumference was decreased by all arm movement, especially high contracted on front armhole line. The most contracted segments of armhole circumference were from the shonlder point to front and back interscye breadth point. Axillary circumference was increased 5 cm to the utmost, so the function of sleeve pattern would be decided by axillary circumference. 2. The lengths of upper arm were decreased near center line, sleeve cap length was contracted 3∼4 cm. Posterior armpit point area was increased both length and breadth. According to the rates of expansion and contraction, the diagram of expansion and contraction of upper arm was suggested. 3. On upper body, back side chest breadth was increased exceedingly and shoulder length was decreased most. It was apparent that surface changes of upper body were greatly larger as far away from center front and center back line. The rates of expansion and contraction of upper body were also represented as a diagram of surface changes.

  • PDF

A Study on the Development of New Coded Targets for a Mobile Mapping System (차량측량시스템을 위한 코드 타겟 개발에 관한 연구)

  • Eom, Woo-Hak;Kim, Byung-Guk
    • Journal of Korea Spatial Information System Society
    • /
    • v.5 no.2 s.10
    • /
    • pp.83-89
    • /
    • 2003
  • In this study, a new coded targets that being suitable for a Mobile Mapping System and method of automated target recognition and coordinates determination of center point was developed, the purpose of a Mobile Mapping System is acquisition and logging data around the road for the camera calibration and the Exterior orientation of system, target installed previously and CCD cameras captured the image, target center point was observed by hands, but using coded target, target recognition and center point observation process will be automated effectively, in addition we keeped up the consistency of photo coordinates observation.

  • PDF

Changes in the Volatile Flavor Components of Nutmeg(Myristica fragrans Houttuyn) during Aging (숙성에 의한 육두구(Myristica fragrans Houttuyn)의 향기성분 변화)

  • Kim, Hyean-Wee;Huh, Kyung-Taek;Choi, Chun-Un
    • Korean Journal of Food Science and Technology
    • /
    • v.21 no.6
    • /
    • pp.760-765
    • /
    • 1989
  • The change of volatile flavor components In nutmeg (Kernels of the fruits of Myristica fragrans Houttuyn) during aging at $37^{\circ}C$ were studied by using a fused silica capillary GC & GC/MS. Volatile flavor components having the low boiling point showed a general decrease during aging, but those of the middle and high boiling point showed a reactionary tendency Myristicin and myristic acid among volatile flavor components showing the high boiling point had the amount increased considerably, and those were composed of 24.50% and 18.69% in aging for 6 months, respectively. The amount of whole volatile flavor concentrate showed the increased tendency till the aging period for 4 months, and then subsequently decreased.

  • PDF

ON THE MODERATE DEVIATION TYPE FOR RANDOM AMOUNT OF SOME RANDOM MEASURES

  • Hwang, Dae Sik
    • Journal of the Chungcheong Mathematical Society
    • /
    • v.13 no.2
    • /
    • pp.19-27
    • /
    • 2001
  • In this paper we study another kind of the large deviation property, i.e. moderate deviation type for random amount of random measures on $R^d$ about a Poisson point process and a Poisson center cluster random measure.

  • PDF

Delivered Pollutant Loads of Point and Nonpoint Source on the Upper Watershed of Lake Paldang - Case Study of the Watershed of Namhan River and Gyeongan Stream (팔당호 상류유역의 점·비점오염원 유달부하 특성 - 남한강·경안천 수계를 대상으로)

  • Park, Ji Hyoung;Kong, Dong Soo;Min, Kyung Sok
    • Journal of Korean Society on Water Environment
    • /
    • v.24 no.6
    • /
    • pp.750-757
    • /
    • 2008
  • This study is conducted to characterize and evaluate delivered pollutant loads of point and nonpoint source on the upper watershed of lake paldang. The study area consists of 12 watersheds in Namhan-river and Kyungahcheon, which are approximately 80% of total area of Namhan-river and Kyungahcheon. Based on daily delivered loads from watersheds, 61% of $BOD_5$, 81% of T-N and 70% of T-P were from nonpoint sources, suggesting that delivered loads of nonpoint pollutants be crucial to water quality. On the other hand, 78% of $BOD_5$, 92% of T-N and 87% of T-P as delivered load were from nonpoint sources in an upper watershed of Namhan-river, while 48% of $BOD_5$, 70% of T-N and 57% of T-P as delivered load were from nonpoint sources in a lower watershed of Namhan-river, suggesting higher dependency of point sources than upper watershed of Namhan-river. In the characteristic of delivered loading pollutants from point and nonpoint pollution sources, delivered load of nonpoint pollutants differed significantly by seasonal flow, and as though discharged load of point pollutants were yearly uniform, delivered load of point pollutants was found to be flow-dependent because its delivery ratio was changed.

Determination of a Change Point in the Age at Diagnosis of Breast Cancer Using a Survival Model

  • Abdollahi, Mahbubeh;Hajizadeh, Ebrahim;Baghestani, Ahmad Reza;Haghighat, Shahpar
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.17 no.sup3
    • /
    • pp.5-10
    • /
    • 2016
  • Breast cancer, the second cause of cancer-related death after lung cancer and the most common cancer in women after skin cancer, is curable if detected in early stages of clinical presentation. Knowledge as to any age cut-off points which might have significance for prognostic groups is important in screening and treatment planning. Therefore, determining a change-point could improve resource allocation. This study aimed to determine if a change point for survival might exist in the age of breast cancer diagnosis. This study included 568 cases of breast cancer that were registered in Breast Cancer Research Center, Tehran, Iran, during the period 1986-2006 and were followed up to 2012. In the presence of curable cases of breast cancer, a change point in the age of breast cancer diagnosis was estimated using a mixture survival cure model. The data were analyzed using SPSS (versions 20) and R (version 2.15.0) software. The results revealed that a change point in the age of breast cancer diagnosis was at 50 years age. Based on our estimation, 35% of the patients diagnosed with breast cancer at age less than or equal to 50 years of age were cured while the figure was 57% for those diagnosed after 50 years of age. Those in the older age group had better survival compared to their younger counterparts during 12 years of follow up. Our results suggest that it is better to estimate change points in age for cancers which are curable in early stages using survival cure models, and that the cure rate would increase with timely screening for breast cancer.