• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.62-67
• /
• 2019

This study was focused on the design and the performance analysis of integral Hot BoP for recovering waste heat from high-temperature exhaust gas in 2 kW class solid oxide fuel cell (SOFC). The hot BoP system was consisted of a catalytic combustor, air preheater and steam generator for burning the stack exhaust gas and for recovering waste heat. In the design of the system, the maximum possible heat transfer was calculated to analyze the heat distribution processes. The detail design of the air preheater and steam generator was carried out by solving the heat transfer equation. The hot BoP was fabricated as a single unit to reduce the heat loss. The simulated stack exhaust gas which considered SOFC operation was used to the performance test. In the hot BoP performance test, the heat transfer rate and system efficiency were measured under various heat loads. The combustibility with the equivalent ratio was analyzed by measuring CO emission of the exhaust gas. As a result, the thermal efficiency of the hot BoP was about 60% based on the standard heat load of 2 kW SOFC. CO emission of the exhaust gas rapidly decreased at an equivalent ratio of 0.25 or more.

• Korea Journal of Hospital Management
• /
• v.25 no.4
• /
• pp.76-93
• /
• 2020

Purpose: In this study, the general characteristics of subjects who spent more than a certain amount of cost for general medical examination at the general hospital health promotion center, and the characteristics of disease, family history, and lifestyle (smoking, alcohol, physical activity, oral care) significantly differed in cost expenditure. We intend to provide basic data for establishing an appropriate marketing strategy for comprehensive examination. Method: It was conducted for users who received comprehensive checkups at a health promotion center at a general hospital in Seoul. The research data collection period is for 979 people who performed comprehensive examinations from January 2019 to December 2020. In order to carry out a comprehensive examination, a questionnaire before the examination was distributed to the subjects who visited the hospital to prepare, and the investigation was conducted in a way that the subjects of the investigation directly filled in. Results: There was a significant influence on the difference in expenditure for comprehensive examination according to the gender, age, and type of health insurance of the subject. In addition, there were significant differences in expenditure according to the presence or absence of disease and the type of family history. Weight loss, smoking history, smoking period, smoking frequency, drinking history, and drinking frequency all had significant effects on cost expenditure. Also, strength training and oral treatment management showed a significant effect on the cost of comprehensive examination. The number of flossing and interdental brushing was also found to have a significant effect. According to the results of multiple regression analysis, disease history (t=2.683, p<.01) and mean smoking frequency (t=4.315, p<.001) appeared to have the most significant effect on expenditure statistically. In other words, when the subject has a history of disease and when the average number of smoking is large, it means that the comprehensive examination cost is remarkably large. Conclusion: By using these contents, hospitals can further refine the marketing of the examination center. In addition, a more convenient and specialized process should be used by patients by linking the general medical department and the examination center well. In terms of management of operating medical institutions, this can be expected to create patients and increase profits.

• Korean Journal of Materials Research
• /
• v.32 no.11
• /
• pp.481-488
• /
• 2022

The Cu₂ZnSn(S_xSe_1-x)₄ (CZTSSe) absorbers are promising thin film solar cells (TFSCs) materials, to replace existing Cu(In,Ga)Se₂ (CIGS) and CdTe photovoltaic technology. However, the best reported efficiency for a CZTSSe device, of 13.6 %, is still too low for commercial use. Recently, partially replacing the Zn²⁺ element with a Cd²⁺element has attracting attention as one of the promising strategies for improving the photovoltaic characteristics of the CZTSSe TFSCs. Cd²⁺ elements are known to improve the grain size of the CZTSSe absorber thin films and improve optoelectronic properties by suppressing potential defects, causing short-circuit current (J_sc) loss. In this study, the structural, compositional, and morphological characteristics of CZTSSe and CZCTSSe thin films were investigated using X-ray diffraction (XRD), X-ray fluorescence spectrometer (XRF), and Field-emission scanning electron microscopy (FE-SEM), respectively. The FE-SEM images revealed that the grain size improved with increasing Cd²⁺ alloying in the CZTSSe thin films. Moreover, there was a slight decrease in small grain distribution as well as voids near the CZTSSe/Mo interface after Cd²⁺ alloying. The solar cells prepared using the most promising CZTSSe absorber thin films with Cd²⁺ alloying (8 min. 30 sec.) exhibited a power conversion efficiency (PCE) of 9.33 %, J_sc of 34.0 mA/cm², and fill factor (FF) of 62.7 %, respectively.

• Journal of Space Technology and Applications
• /
• v.1 no.1
• /
• pp.33-40
• /
• 2021

Based on the requirements of a total weight of 42 kg or less, the NEXTSat-2 SAR (synthetic aperture radar) system was developed. As the NEXTSat-2 is a small-sized satellite, the SAR system was designed to account for about 40% of the dry mass of the payload relative to the total mass. Among the major components of the SAR system - which are an antenna, an RF transceiver, a baseband signal processor, and a power unit - a part with a particularly large dry mass is the antenna, the core of the SAR system. Whereas various selections are possible in consideration of gain and efficiency when designing the antenna, the micro-strip patch array antenna was adopted by reflecting the dry mass, power, and resolution required by the NEXTSat-2 project. In order to meet the mission requirement of the NEXTSat-2, the antenna was developed with a frequency of 9.65 GHz, a gain of 42.7 dBi, and a return loss of -15 dB. The performance of the antenna was verified by conducting a field test onboard the vehicle.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.4
• /
• pp.277-287
• /
• 2012

To develop new therapeutic materials to prevent hair loss and enhance hair growth, we developed a medicinal herbal complex extract (MHCE) using 23 herbs traditionally used in oriental medicine. Medicinal Herbal complex extract was consist of Angelica gigas Nakai, Psoralea corylifolia Linne, Biota orientalis Endlicher, and Eclipta prostrata Linne, Rehmannia glutinosa Liboschitz var. purpurea Makino, Ligustrum lucidum Aiton, Polygonum multiflorum Thunberg, and Sesamum indicum Linne, Sophora angustifolia Sieboldet Zuccarini, Angelica dahurica Benthamet Hooker, and Leonurus sibiricus Linne, Salvia miltiorrhiza Bunge, Prunus persica Batsch, Commiphora molmol Engler, Chrysanthemum indicum Linne, Boswellia carterii Birdwood, Panax ginseng C. A. Meyer, Cnidium officinale Makino, Albizia julibrissin Durazzini, and Corydalis ternata Nakai that have traditionally been used for treating hair loss, preventing gray hair, anti-inflammation, and blood circulation in oriental medicine. In addition, we examined the hair growth effect of MHCE in vitro and in vivo. In vitro, we evaluated the effects of MHCE on cultured HFDPC, HaCaT cells, and murine embryonal fibroblasts (NIH3T3 cells). Also, we evaluated the ability of MHCE to prevent gray hair on murine melanoma cells (B16F1 cells). The hair growth-promoting effect of MHCE in vitro was also observed in vivo using C57BL/6 mice. Our results showed that MHCE significantly increased the proliferation of HFDPC (175 % proliferation at $50{\mu}g/mL$), HaCaT cells (133 % proliferation at $20{\mu}g/mL$), and NIH3T3 cells (120 % proliferation at $50{\mu}g/mL$). MHCE also showed consistent melanogenesis in B16F1 cells (154 % melanin synthesis at $50{\mu}g/mL$). Moreover, MHCE showed potential for hair growth stimulation in C57BL/6 mice experiments (98 % hair growth area on 4 weeks). These results indicate that MHCE may be a good candidate for promotion of hair growth.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.18 no.2
• /
• pp.62-67
• /
• 2018

Hunter syndrome, also known as mucopolysaccharidosis Type II (MPS II), is one of the lysosomal storage diseases caused by a lack of the enzyme iduronate 2-sulfatase (I2S). Lack of the I2S enzyme activity leads to accumulation of the glycosaminoglycans (GAG), causing dysfunction of multiple organs and systems. MPS II is an X-linked recessive disease due to mutation of IDS gene located on long arm of the X chromosome (Xq28). To date, more than 350 mutations of IDS gene have been identified in Hunter syndrome. Phenotypes of MPS II are classified as either severe or attenuated depending on the degree of cognitive impairment. Because the phenotype of MPS II is related to the type of mutation, identifying mutations is useful in predicting prognosis. We recently had a case of MPS II diagnosed by exome sequencing in a 7 month old boy with infantile spasm uncontrolled by AED. He was diagnosed with hearing loss at 2 months of age, and he took vigabatrin and prednisolone to control infantile spasms diagnosed at 3 months of age. At 6 months of age, whole exome sequencing was performed to evaluate the infantile spasm and hearing loss in this patient, and the mutation c.851C>T (p.Pro284Leu) inherited from hemizygous mother was revealed. The results of urine Cetylpyridinium Chloride (CPC) precipitation test, which were negative until 8 months of age, were positive from 9 months of age. We report a case of MPS II diagnosed by exome sequencing and treated through enzyme replacement therapy from 9 months after birth.

• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.505-512
• /
• 2018

Purpose: Many reconstruction methods have been attempted after an en-bloc resection of the proximal humerus. In particular, the introduction of reverse shoulder arthroplasty (RSA) has made a breakthrough in the functional recovery of the shoulder. Nevertheless, RSA has limitations when the humeral bone stock loss is significant. In addition, it is unclear if RSA is effective in patients showing failure with non-operative treatment of a proximal humeral tumor. Materials and Methods: A reconstruction was performed using an overlapping allograft-RSA composite for 11 patients with a failed proximal humeral construct. Delayed RSA was performed on 6 patients with failed non-operative treatment. The pre- and postoperative Musculoskeletal Tumor Society (MSTS) score and the complications were addressed. Results: Overlapping allograft-RSA composite afforded a stable construct in 11 failed proximal humeral reconstructions and the patient's chief complaints were resolved. The mean time to the union of overlapped allograft-host junction was 5.5 months. Average preoperative MSTS score of 20.3 point increased to 25.7 point, postoperatively. Four of the six patients who had RSA within 4 years from the index operation showed arm elevation of more than $90^{\circ}$ whereas the remaining 5 patients showed some disability. The complications include one case each of dislocation and aseptic infection, which were resolved by changing the polyethylene liner and scar revision, respectively. None of the 6 patients who underwent delayed RSA after the failure of non-operative treatment showed arm elevation more than $90^{\circ}$. Conclusion: An overlapping allograft-RSA composite is a simple and reliable reconstructive modality in patients with massive bone loss. In patients with metastatic cancer necessitating a surgical resection at presentation, early conversion to RSA is recommended to secure functional recovery.

• Korean Journal of Materials Research
• /
• v.15 no.4
• /
• pp.224-232
• /
• 2005

Dry sliding wear behavior of electro-pressure sintered Fe-Ni and Co-Fe-Ni compacts was investigated. Pin-on-disk wear tests were performed on the sintered Fe-Ni, Co-Fe-Ni disk specimens against alumina $(Al_2O_3)$ and silica $(SiO_2)$ ball counterparts at various loads ranging from 3N to 12N. A constant sliding speed of 0.1m/sec was employed. Wear rate was calculated by dividing the weight loss measured after the test by specific gravity and sliding distance. Worn surfaces and cross sections of them were examined by a scanning electron microscopy, and wear mechanism of the compacts was investigated. Wear characteristics of the compacts were discussed as a function of composition of the compacts. Relationship between the wear rate and mechancial properties of the compact was explored, and effects of the oxide layer that was formed on wearing surface of the compacts on the wear were also studied.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2058-2060
• /
• 2004

In this paper, circular polarized antennas of Tx 30GHz and Rx 20GHz are implemented in LTCC process. Tx antenna has a circular patch structure and Rx antenna has a ring patch structure. The feeding line of Tx antenna is placed in the center hole of Rx ring patch antenna which is printed under Tx circular patch antenna layer. It makes antenna size smaller. Tx antenna's return loss in under -10dB level from 30GHz to 31GHz and Rx antenna is under -10 dB from 20GHz to 21GHz. The isolation between two antennas is less than -20dB. Axial ratio is less than 3dB though out each band.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2108-2110
• /
• 2004

In this paper, a novel tunable bandpass filter using tunable series inductors and MEMS switches for wireless LAN applications was proposed. The proposed tunable filter was fabricated using a micromachining technology and performances of the fabricated filter were estimated. The filter consists of spiral inductors, MIM capacitors and direct-contact type MEMS switches, and its frequency tunability is achieved by changing the inductance that is induced by ON/OFF actuations of the MEMS switches. The actuation voltage of the MEMS switches was 58 V, and the measured center frequencies were 2.55 GHz and 5.1 GHz, respectively. The passband insertion loss and 3-dB bandwidth were 4.2 dB and 22.5 % at 2.55 GHz, and 5.2 dB and 23.5 % at 5.1 GHz, respectively.