• Journal of Periodontal and Implant Science
• /
• v.46 no.4
• /
• pp.234-243
• /
• 2016

Purpose: Immediate loading of dental implants has been proved to be feasible in partially edentulous jaws. The purpose of this retrospective investigation was to assess the feasibility of immediately loading dental implants in fully edentulous jaws. Methods: A total of 24 patients aged between 53 and 89 years received a total of 154 implants in their edentulous maxillae or mandibles. Among the implants, 45 were set in fresh extracted sockets and 109 in consolidated alveolar bones. The implants were provisionally managed with chair-side made provisional resin bridges and exposed to immediate loading. Implants were followed up for 1-8 years, including radiographic imaging. Marginal bone levels were evaluated based on radiographic imaging. Results: A total of 148 out of the 154 implants survived over the follow-up period of 1 to 8 years, giving a survival rate of 96%. The time or region of the implantation, the pre-implant augmentation, and the length and diameter of the implants had no statistically significant influence on the survival or the success rate. The marginal bone level remained stable with only minimal loss of 0.3 mm after 60 months of loading. Conclusions: Within the limitations of this study, immediate loading is feasible for dental implants in edentulous jaws.

• Carbon letters
• /
• v.28
• /
• pp.24-30
• /
• 2018

Coke aggregates and carbon artifacts were produced to investigate the interactions of coke and pitch during the kneading process. In addition, the kneading ratio of the coke and binder pitch for the coke aggregates was controlled to identify the formation of voids and pores during carbonization at $900^{\circ}C$. Experiments and thermogravimetric analysis revealed that carbon yields were improved over the theoretical yield calculated by the weight loss of the coke and binder pitch; the improvement was due to the binding interactions between the coke particles and binder pitch by the kneading process. The true, apparent, and bulk densities fluctuated according to the kneading ratio. This study confirmed that an excessive or insufficient kneading ratio decreases the density with degradation of the packing characteristics. The porosity analysis indicated that formation of voids and pores by the binder pitch increased the porosity after carbonization. Image analysis confirmed that the kneading ratio affected the formation of the coke domains and the voids and pores, which revealed the relations among the carbon yields, density, and porosity.

• International Journal of Oral Biology
• /
• v.37 no.2
• /
• pp.63-68
• /
• 2012

It has been documented that SPA0355 exerts antiinflammatory effects via the inhibition of nuclear factor-kappaB activation. In present study, we investigated the inhibitory effects of SPA0355 on periodontitis in an animal model. Periodontitis was induced by ligation of the cervix of the 1st molar in the left mandible in rats. After ligature, the rats were randomly divided into four groups and topically applied with SPA0355 (0.5, 1, and 2%) or the vehicle alone once daily for 10 days. Body weight and food intake were measured daily throughout the experimental period. At day 10 post-ligature, the infiltration of inflammatory cells and distance of the cementoenamel junction (CEJ) to the alveolar bone crest (ABC) in the distal area of ligatured tooth were estimated histopathologically. No changes in body weight or food intake were found between the control and SPA0355 groups. The degree of inflammation was decreased in all three SPA0355 application groups. A decrease CEJ-ABC distance was observed in the 0.5% and 1% SPA0355 groups. These results indicate that SPA0355 inhibits the infiltration of inflammatory cells and alveolar bone resorption and suggests its potential as a therapeutic agent for periodontitis.

• Korean Journal of Oriental Medicine
• /
• v.15 no.1
• /
• pp.85-89
• /
• 2009

The aim of this study was to study the quantitative analysis of glycyrrhizic acid in Glycyrrhizae Radix extract fermented with Paecilomyces japonica, Ganoderma lucidum, honey or Nuruk. The amounts of dry on loss were measured and the quantitative analysis of glycyrrhizic acid was performed by high performance liquid chromatographic (HPLC). HPLC method was performed on C18 column ($250\;mm\;{\times}\;4.6\;mm$, $5\;{\mu}m$, RS tech) using gradient solvent mixtures of water-acetonitrile with photodiode array detector (254 nm). The flow rate was $1.0\;m{\ell}/min$. Retention time of glycyrrhizic acid was about 23.96 min and linearity of calibration was $R^2$=0.9998. Contents of glycyrrhizic acid in Glycyrrhizae Radix extract (control) was $5.048\;{\pm}\;0.14$; Contents of glycyrrhizic acid in Glycyrrhizae Radix extract fermented with Paecilomyces japonica (SDT) was $1.975\;{\pm}\;0.07$; Contents of glycyrrhizic acid in Glycyrrhizae Radix extract fermented with Ganoderma lucidum (SYT) was $2.676 \;{\pm}\;0.07$; Contents of glycyrrhizic acid in Glycyrrhizae Radix extract fermented with honey (SST) was $5.191\;{\pm}\;0.06$; Contents of glycyrrhizic acid in Glycyrrhizae Radix extract fermented with Nuruk (SNT) was $5.305\;{\pm}\;0.34$, respectively. Contents of glycyrrhizic acid in SDT and SYT were decreased but that in SST and SNT was increased when compared to control.

• Journal of Hydrogen and New Energy
• /
• v.29 no.4
• /
• pp.401-409
• /
• 2018

A numerical investigation has been conducted to find the effects of pressure losses by struts and rakes, and averaging methods on the performance of a multi-stage axial fan and a multi-stage axial compressor. Struts and rakes which produce pressure losses are installed upstream of the aerodynamic inlet plane in the fan and the compressor rigs. Some of normal stator vanes are substituted with thick vanes with total pressure probes to measure total pressure between stages. Three-dimensional Reynolds-averaged Navier- Stokes equations with $k-{\omega}$ SST turbulence model were applied to analyze the pressure losses by the struts, inlet rakes, and thick instrumented vanes. The hexahedral grids were used to construct computational domain. Inlet pressure losses were evaluated for the compressor as a function of Mach number. The passage pressure losses due to the instrumented vanes were evaluated at the two speed lines in the fan. Total properties, such as pressure and temperature, were evaluated at the exit of the fan and the compressor with two different averaging methods which are area-averaging and mass-averaging, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.28-28
• /
• 2010

This study realized low-temperature crystallization process of the $Ba_{0.6}Sr_{0.4}TiO_3$ (BST) thin films without thermal damage of substrate using excimer laser annealing (ELA) and structural and electrical characteristics were investigated. The amorphous BST thin films were prepared on Pt/Ti/$SiO_2$/Si substrate by sol-gel method at $250^{\circ}C$. The ELA was carried out using KrF excimer laser which provided excitation wavelength of 248 nm. The beam homogenizing system was used in order to homogenize beam shape of Gaussian fit. The XRD and SEM were used to analyze structural characteristics and the microwave capacitance, dielectric loss and tunability of the BST films were measured by a symmetrical stripline resonator method with shorted end. Consequently, the crystallinity of BST thin films were improved after ELA process and RF tunable capacitor was demonstrated at low temperature below $300^{\circ}C$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.74-79
• /
• 2010

We have designed a millimeter-wave passive imaging sensor with multi-horn antenna array. Six horn array antenna is suggested that it is integrated into one housing, and this antenna is effectively configurated m space to assemble with LNA of WR-10 structure. Antenna is designed to have the peak gain of 17.5dBi at the center frequency of 94GHz, and the return loss of less than -25dB in W-band, and the small aperture size of $6mm{\times}9mm$ for antenna configuration with high resolution. LNA is designed to have total gain of more than 55dB and noise figure of less than 5dB for good sensitivity. We made a detector for DC output translation of millimeter-wave signal with zero bias Schottky diode. It is shown that good sensitivity of more than 500mV/mW.

• The Journal of Internal Korean Medicine
• /
• v.41 no.2
• /
• pp.141-149
• /
• 2020

Traumatic brain injury, which can be caused by head trauma, can damage the brain, resulting in physical disorders, such as headache, dizziness, and nausea, as well as mental health problems, such as depression, anxiety, memory loss, and personality changes that reduce a person's quality of life. Therefore, it is important to administer the best treatment at the right time. A 57-year-old patient complained of headache and depression after intracranical hemorrhage caused by a traffic accident. These symptoms are considered to be after effects of brain trauma due to increased pressure on the brain. Herbal medicine was prescribed to release internal brain pressure and acupuncture was applied to ease frontal and occipital head muscle tension. Objective scales were conducted at baseline, and at one month, two months, and four months. It was observed that the degree of headache and depression improved after treatment. This study is meaningful in that it found that Korean medicine treatments help alleviate the after effects of traumatic brain injury.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.1
• /
• pp.55-60
• /
• 2002

A metabolism trial with four castrated male Brahman cattle, average body weight 320 kg, was conducted in order to determine the nutritive value of chopped sugarcane stalk (CSS) for the establishment of feeding strategy in the dry season in Northeast Thailand. Animals were subjected to the following four dietary treatments: Treatment 1; 100% of CSS, Treatment 2; 70% of CSS and 30% of commercial complete feed (TMR), Treatment 3; 40% of CSS and 60% of TMR, and Treatment 4; 100% of TMR. The average CP, ether extracts, nitrogen free extracts, crude fiber and ash contents of CSS were 2.0, 0.9, 79.0, 16.1 and 2.2%, respectively. Although the amount of feed given was approximately at maintenance level, animals in treatments 1 and 2 refused a part of feed. The metabolism trial revealed that total digestible nutrient and metabolizable energy contents of CSS were 61.5% and 9.04 MJ/kgDM, respectively, when it was properly supplemented with protein sources. Nutritive value of CSS was lowered when animals were given CSS solely. This was due to the large loss of energy into urine and methane. Voluntary intake of CSS in cattle was not enough to satisfy energy requirement for maintenance. The CSS can be used as a roughage for feeding cattle in the dry season with proper supplementation of protein and energy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1544-1550
• /
• 2013

In recent years, Container Security Device(CSD) using GPS & GLONASS to improve logistics efficiency are being extensively researched. The purpose of this paper is to examine the performance development antenna usable cargo container security transport. Antenna developed by study were optimized to match logistics environment apply to GPS/GLONASS dual frequency for monitering system. The measure of antenna have confirmation about frequency characteristics each 1575.42MHz, 1602MHz and VSWR is 2:1 measured in return loss -9.54dB. Reliability of this antenna has been verified about GPS/GLONASS through test-operation between the south korea and Russia.