• Asian Journal of Turfgrass Science
• /
• v.24 no.2
• /
• pp.211-217
• /
• 2010

This study was conducted to investigate a proper method of ball mark repair by comparing the creeping bentgrass recovery speed on golf course green treated by various methods of ball mark repair. Nine general repairing methods were tested and compared; control (no repair, A type), two common methods of USGA (B type) and GCSAA (C type), three methods with fork shaped hand set performing at Korean golf courses (Ansung Benest, D; Sky72, E; Lakeside, F type), and three methods using the repair machine with 6, 8, or 14 teeth (G, H, I type, respectively). Three creeping bentgrass cultivar of 'Penncross', 'T-1', and 'CY-2' were tested in this field experiment. This test was carried out from September to November in 2009 at the nursery on the Seoul Lakeside Golf course. The average speed of turfgrass recovery after various ball mark repairing methods have been ranked as in the order of E, D, C, B, F, I, H, G, and A. The methods of hand practise showed more effective results than repair method using machines. The ball mark recovery speeds of 'Penncross' were in the order of E, D, B, C, F, I, H, and A. In the case of 'T1' and 'CY-2', similar orders were showed as D, E, B, F, C, H, I, A, G and the order of D, E, C, F, B, H, G, I, A, respectively. The ball mark recovery speed among creeping bentgrass cultivar resulted in the order of 'CY-2', 'Penncross', and 'T-1'. The most proper method of ball mark repair was repair method using a hand set tool especially the method of the Sky72 Golf course (E type). At the first, remove a damaged grass area with fork and tap. And then gather the side grasses into the center area with pulling the grasses with fork. After that, make harden and flat on the turf surface by pounding and rolling with the round wooden stick. The final Nstep, water the repaired grass surface. This ball mark repairing practise showed a most rapid and proper recovery method on creeping bentgrass green.

• Journal of dental hygiene science
• /
• v.6 no.4
• /
• pp.271-276
• /
• 2006

This study set out to analyze the relationships between the senior citizens' dental health activities and dental health conditions, to provide basic data to develop a program for their better dental health, and finally to search for the ways to improve their life quality through dental health care. The subjects were 142 senior citizens(58 were male and 84 were female) who were 65 years old or older and visited a dental hospital or clinic in the Seoul metropolitan area from April 17 to April 28, 2006. With the cooperation from the dentists, the investigators examined their dental conditions and conducted one-on-one interviews to collect the information about their demographic characteristics, dental health activities, and subjective dental health conditions. The collected data were analyzed with T-test, ANOVA and Pearson's correlation coefficient using the SPSS WIN 11.5 program. The analysis results were summarized as follows: First, 58 men(40.8%) and 84 women(59.2%) consisted of the subject group, where percentage of the female participants was bigger Those who were aged from 65 to 69 made the biggest age group in the subjects, accounting for 58.5% with 83. Second, those who had three dental caries or less and then didn't treat them or treated them(F) accounted for the biggest percentage with 117(82.4%) and 72(50.7%) respectively. As for the remaining teeth, the biggest number of them(40 subjects, 28.2%) had three or less remaining. Third, it turned out the female subjects had a higher level of dental health activities than their male counterparts(P = 0.00). As for living expenses, those who were paid salary or earned income themselves carried out their dental health activities in a higher level than those who lived on the benefit from the government(p = 0.02). Fourth, the subjects' subjective dental health conditions had negative correlations with their dental caries not treated. And there were positive correlations between their dental caries not treated and dental caries lost and between their dental caries treated and remaining teeth. Fifth, those subjects who earned their living expenses themselves had the most dental caries treated at 5.4(p = 0.02), and there was statistically significant difference with the numbers. Sixth, those subjects who brushed their teeth in their own manner had 11.8 teeth lost(p = 0.05), which was more than the number of those who brushed their teeth in other methods. And there was statistically significant difference among them. The remaining teeth were found most at 17.3(p = 0.00) among those who brushed their upper and lower teeth separately. In addition, those who visited the public health center often had significantly more teeth treated(4.3) than others(p = 0.00).

• Journal of The Korean Association For Science Education
• /
• v.37 no.2
• /
• pp.359-370
• /
• 2017

The purpose of this study is to explore the changes caused by using smart technology in school science inquiry. For this, we investigated 12 elementary school teachers' perceptions by using an open-ended questionnaire, group discussions, classroom discussions, and participant interviews. The results of this study indicate that the introduction of technology into classroom inquiry can open up the various possibilities and can cause additional burdens as well. First, teachers explained that smart technology can expand the opportunities to observe natural phenomena such as constellations and changing phases of the moon. However, some teachers insisted that, sometimes, learning how to use new devices disrupts students' concentration on the inquiry process itself. Second, teachers introduced the way of digital measurement using smart phone sensors in inquiry activities. They said that digital measurement is useful in terms of the reduction of errors and of the simplicity to measure. However, other teachers insisted that using new devices in classroom inquiry can entail additional variables and confuse the students' focus of inquiry. Communication about inquiry process can also be improved by using digital media. However, some teachers emphasized that they always talked about both the purpose of using SNS and online etiquettes with their students before using SNS. Based on these results, we discussed the necessity of additional analysis on the various ways of using digital devices depending on teachers' perceptions, the types of digital competency required in science inquiry using smart technology, and the features of norms shaped in inquiry activities using smart technology.

• Progress in Medical Physics
• /
• v.21 no.2
• /
• pp.201-208
• /
• 2010

Recently, along with technology development of endoscopic equipment, a stent has been developed for the convenience of operation, shortening of recovery times, and reduction of patient's pain. To this end, optimal factors are simulated for the stent structure and mechanical reaction and verified using finite element analysis. In order to compare to present commercialized product such as Zilver (Cook, Bloomington, Indiana, USA) and S.M.A.R.T (Cordis, Bridgewater Towsnhip, New Jersey, USA), mechanical impact factors were determined through Taguchi factor analysis, and flexibility and expandability of all the products including ours were tested using finite element analysis. Also, important factors were sought that fulfill the optimal condition using central composition method of response surface analysis, and optimal design were carried out based on the important factors. From the centra composition method of Response surface analysis, it is found that importat factors for flexibility is stent thickness (T) and unit area (W) and those for expandability is stent thickness (T). In results, important factors for optimum condition are 0.17 mm for stent thickness (T) and $0.09\;mm^2$ for unit area (W). Determined and verified by finite element analysis in out research institute, a stent was manufactured and tested with the results of better flexibility and expandability in optimal condition compared to other products. Recently, As Finite element analysis stent mechanical property assessment for research much proceed. But time and reduce expenses research rarely stent of optimum coditions. In this research, Important factor as mechanical impact factor stent Taguchi factor analysis arrangement to find flexibility with expansibility as Finite element analysis. Also, Using to Center composition method of Response surface method appropriate optimized condition searching for important factor, these considering had design optimized. Production stent time and reduce expenses was able to do the more coincide with optimum conditions. These kind of things as application plan industry of stent development period of time and reduce expenses etc. be of help to many economic development.

• Korean Journal of Clinical Laboratory Science
• /
• v.48 no.2
• /
• pp.158-167
• /
• 2016

The requirements for medical laboratories ISO 15189 is examined in organization and a quality management system, stressing the importance of evidence, document control, and control of records and clinical material. Medical services are provided from the areas of resource management, and pre-examination, examination and post-examination processes. The main goal of ISO 15189 accreditation is to improve the quality of laboratory services provided for patients and clinical users not only through compliance with consensually developed and harmonized requirements but also by adopting the philosophy of continual improvement using the Plan-Do-Check-Act cycle. Laboratory quality should be evaluated and improved in all steps of the testing process as the state-of-the art indicates that the pre- and post-analytical phases are more vulnerable to errors than the intra-analytical phase. The Korea Laboratory Accreditation Scheme (KOLAS), a national accreditation body, provides medical laboratory accreditations for appropriate approaches to evaluating the competence of a medical laboratory in providing effective services to its customers and clinical users. Adoption of ISO 15189 in 2010s as a government policy has been delayed, and only 5 laboratories have been accredited to date in Korea. The medical laboratories should seek the adoption of ISO 15189 with a positive attitude for quality improvement and strengthening of international competitiveness.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.4
• /
• pp.161-169
• /
• 2012

The RCP 8.5 scenario based temperature outlook (12.5 km resolution) was combined with high-definition gridded temperature maps (30 m grid spacing) across the Korean Peninsula in order to reclassify the cold hardiness zone for winter barley, a promising grain crop in the future under warmer winter conditions. Reference maps for the January minimum and mean temperature were prepared by applying the watershed-specific geospatial climate prediction schemes to the synoptic observations from 1981 to 2010 across North and South Korea. Decadal changes in the January minimum and mean temperatures projected by a regional version of RCP8.5 climate change scenario were prepared for the 2011-2100 period at 12.5 km grid spacing and were subsequently added to the reference maps, producing the 30 m resolution temperature surfaces for 9 decades from 2011 to 2100. A criterion for threshold temperature to grow winter barley safely in Korea was applied to the future temperature surfaces and the resulting maps were used to predict the production potential of 3 cultivar groups for the 9 future decades under the projected temperature conditions. By 2020s, hulled barley cultivars could be grown safely at the southern part of North Korea as well as the mountainous Gangwon province. Furthermore, most of South Korean rice paddies will be safe for growing naked barley after harvesting rice. Also, dual cropping systems such as 'winter-barley after rice' could be possible at most of the North Korean rice paddies by 2040s. Additional grain production in North Korea could increase up to 4 million tons per year if dual cropping systems can be fully operated, i.e., winter barley after rice at all lowlands and winter barley after maize or potato at all uplands.

• Journal of Radiation Protection and Research
• /
• v.33 no.2
• /
• pp.47-51
• /
• 2008

Objective: This study analyzed errors due to rotation or tilt of the magnetic resonance (MR) imaging indicator during image acquisition for a stereotactic radiosurgery. The error correction procedure of a commercially available stereotactic neurosurgery treatment planning program has been verified. Materials and Methods: Software virtual phantoms were built with stereotactic images generated by a commercial programming language, Interactive Data Language (version 5.5). The thickness of an image slice was 0.5 mm, pixel size was $0.5{\times}0.5mm$, field of view was 256 mm, and image resolution was $512{\times}512$. The images were generated under the DICOM 3.0 standard in order to be used with Leksell GammaPlan$^{(R)}$. For the verification of the rotation error correction function of Leksell GammaPlan$^{(R)}$, 45 measurement points were arranged in five axial planes. On each axial plane, there were nine measurement points along a square of length 100 mm. The center of the square was located on the z-axis and a measurement point was on the z-axis, too. Five axial planes were placed at z=-50.0, -30.0, 0.0, 30.0, 50.0 mm, respectively. The virtual phantom was rotated by $3^{\circ}$ around one of x, y, and z-axis. It was also rotated by $3^{\circ}$ around two axes of x, y, and z-axis, and rotated by $3^{\circ}$ along all three axes. The errors in the position of rotated measurement points were measured with Leksell GammaPlan$^{(R)}$ and the correction function was verified. Results: The image registration errors of the virtual phantom images was $0.1{\pm}0.1mm$ and it was within the requirement of stereotactic images. The maximum theoretical errors in position of measurement points were 2.6 mm for a rotation around one axis, 3.7 mm for a rotation around two axes, and 4.5 mm for a rotation around three axes. The measured errors in position was $0.1{\pm}0.1mm$ for a rotation around single axis, $0.2{\pm}0.2mm$ for double and triple axes. These small errors verified that the rotation error correction function of Leksell GammaPlan$^{(R)}$ is working fine. Conclusion: A virtual phantom was built to verify software functions of stereotactic neurosurgery treatment planning program. The error correction function of a commercial treatment planning program worked within nominal error range. The virtual phantom of this study can be applied in many other fields to verify various functions of treatment planning programs.

• Journal of muscle and joint health
• /
• v.3 no.1
• /
• pp.90-103
• /
• 1996

The purpose of this paper is to compare two approach to assessment of coping patterns. The sampling method was a purposive sampling technique. The study participants were out patients 113 of rheumatoid arthritis center of one University hospitals in Seoul. Datas were collected from Nov. 13 to Nov. 24, 1995. The instruments used for this study were Graphic Rating Scales of pain, The Beck Depression Inventory and Coping Patterns tool. The collected data were analyzed for frequency, means, SD, factor analysis., Pearsons' correlations and ANOVA. The results were summerized as follows ; 1. When raw scores were used : there were not correlation in all three coping patterns. 2. When relative scores were used : there were significantly correlated in all three coping patterns. 1) Active coping and Positive-cognitive coping (r=-0.352, p< 0.0001) 2) Positive-cognitive coping and Negative-cognitive coping (r=-0.594, p< 0.0001) 3) Active coping and Negative-cognitive coping(r=-0.544, p< 0.0001) The results of this research with relative scales provided more insight into the correlation in all three coping patterns. 3. Pearsons' Correlations were computed for each coping pattern, age, pain level, duration of pain and BDI. 1) Using raw score : (1) Active coping was significantly related to pain level(sensory score ; r=0.268, p<0.05, affective score ; r=0.266, p< 0.05) (2) Positive-cognitive coping was significantly related to age (r=-0.252, p< 0.05), pain level (sensory score ; r= -0.244, p< 0.05) (3) Negative-cognitive coping was significantly related to depression level (r=0.312 p< 0.0001). 2) Using relative score (1) Active coping was significantly related to pain level(sensory score ; r=0.299, p<0.05, affective score ; r=0.246, p< 0.05) (2) Positive-cognitive coping was significantly related to age (r= -0.187, P< 0.05), pain level (sensory score ; r=-0.317, p<0.0001, affective score : r=-0.305, p<0.0001) and depression level(-0.339, p<0.0001)) (3) Negative-cognitive coping was significantly related to depression. level(r=0.313, p<0.0001). 4. When raw and realtive coping scores were compared to those of age groups, religious groups and BDI level(high, middle, low) ; 1) Using raw score : (1) Active coping : there were not significantly difference (2) Positive-cognitive coping ; 20-39 age group and 50-59age group had significantly higher scores than over 60age group. BDI-low level group had significantly higher scores than other groups. (3) Negative-cognitive coping : 20-39age group and over 60age group had significantly higher scores than 40-49age group. Non-religious group had significantly higher scores than christian group. BDI-high level group had significantly higher scores than other groups. 2) Using relative score : (1) Active coping : over 60 age group had significantly higher scores than 20-39 age group and 40-49age group had significantly higher scores than 20-39 age group (2) Positive-cognitive coping ; 40-49age group, 20-39age group and 50-59age group had significantly higher scores than over 60age group. Christian group had significantly higher scores than non-religious group. BDI-low level group had significantly higher scores than other groups. (3) Negative-cognitive coping ; Non-religious group had significantly higher scores than christian group and buddhistic group. BDI-high level group had significantly higher scores than other groups. The current data suggest that relative scores may yield a different perspective on coping patters than raw scores. The use of relative scores reveals the relation clearly, without its being blurred statistically by the effect of other coping strategies or being relegated to a partial correlation. The use of relative scores holds promise for delineating the relations between ways of coping and health-related behavior.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.4
• /
• pp.275-284
• /
• 2008

Purpose: We intended to evaluate myocardial oxygen consumption ($MVO_2)$ by applying recirculation correction and modified one-compartment model to have a reference range of $MVO_2$ in normal young population and to reveal the effect of recirculation on time-activity curve (TAC). Materials and Methods: In nine normal male volunteers with mean age of $26.3{\pm}4.0$, $MVO_2$ was estimated with 925 MBq (25mCi) of $^{11}C$-Acetate (Neuroscience Research Institute, Gachon University of Medicine and Science, Incheon, Korea) and PET/CT (Biograph 6, Siemens Medical Solution, Germany). Analysis software such as $MATLAB^{(R)}$ v7.1 (Mathworks, Inc., United States), $Excel^{(R)}$ 2007 (Microsoft, United States), and $SPSS^{(R)}$ v12.0 (Apache Software Foundation, United States) were used. Twenty three frames were of $12{\times}10$, $5{\times}60$, $3{\times}120$, $2{\times}300's$ duration, respectively. The modified one-compartmental model and the recirculation correction method were applied. Statistical analysis was performed by using Test of Normality, ANOVA and Post-Hoc (Scheffe's) analysis, and p-value less than 0.05 was considered as significant. Results: The normal reference ranges of $MVO_2$ were presented as $3.18-4.64\;{\times}\;10^{-4}\;ml/g/sec$, $1.91-3.94\;{\times}\;10^{-4}\;ml/g/sec$, $4.31-6.40\;{\times}\;10^{-4}\;ml/g/sec$, $2.84-4.53\;{\times}\;10^{-4}\;ml/g/sec$ and $3.42-5.00\;{\times}\;10^{-4}\;ml/g/sec$ in the septum, the inferior wall, the lateral wall, the anterior wall and the entire wall, respectively. In addition, it was noted that the dual exponentiality of the clearance curve is due to the recirculation effect and that the characteristic of the curve is essentially mono-exponential. Conclusion: $^{11}C$-Acetate is a radiotracer worthwhile to assess $MVO_2$. Re-circulated $^{11}C$ can influence TAC of $^{11}C$ in myocadia and so the recirculation correction must be considered when measuring $MVO_2$.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_4
• /
• pp.1479-1488
• /
• 2018

On September 3rd 2017, strong artificial seismic signals from North Korea were detected in KMA (Korea Meteorological Administration) seismic network. The location of the epicenter was estimated to be Punggye-ri nuclear test site and it was the most powerful to date. The event was not studied well due to accessibility and geodetic measurements. Therefore, we used remote sensing data to analyze surface changes around Mt. Mantap area. First of all, we tried to detect surface deformation using InSAR method with Advanced Land Observation Satellite-2 (ALOS-2). Even though ALOS-2 data used L-band long wavelength, it was not working well for this particular case because of decorrelation on interferogram. The main reason would be large deformation near the Mt. Mantap area. To overcome this limitation of decorrelation, we applied offset tracking method to measure deformation. However, this method is affected by window kernel size. So we applied various window sizes from 32 to 224 in 16 steps. We could retrieve 2D surface deformation of about 3 m in maximum in the west side of Mt. Mantap. Second, we used Pleiadas-A/B high resolution satellite optical images which were acquired before and after the 6th nuclear test. We detected widespread surface damage around the top of Mt. Mantap such as landslide and suspected collapse area. This phenomenon may be caused by a very strong underground nuclear explosion test. High-resolution satellite images could be used to analyze non-accessible area.