• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.10
• /
• pp.562-567
• /
• 2013

1D-numerical analysis of the network algorithm with the orifice equation for the relationship between pressure difference and flowrate has been mostly used to analyse leakage flow at the gap. In this study, a 3D-numerical method applying momentum loss model to the gap region in the computational domain is represented to reflect effectively the effect of leakage flow by determining the proportion of pressure difference to air passage velocity. While the 3D-numerical method is verified through the computation of the two compartments model, the numerical analysis of the stack effect in a building stairway is performed. As the temperature of air outside drops, the pressure in the upper stairway and leakage flowrate through the gap in the door rise. The change of gap area does not have an effect on pressure in the stairway for the analysis conditions.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.3
• /
• pp.41-46
• /
• 2020

In this study, measurement and analysis results from Differential scanning calorimetry(DSC) and Thermogravimetric analysis(TGA) on the newly developed high-energy thermoplastic elastomer(ETPE) propellant are described, followed by the previous study done under the same title as this paper [1]. The characteristics of high-energy thermoplastic propellant were also verified by conducting thermal analysis, and the LSGT, Shotgun & RQ Bomb test, was carried out as well. High energetic thermoplastic binders containing 45% of GAP(Glycidyl Azide Polymer), energetic plasticizer(DEGDN) and Oxidizer Aonium Perchlorate), RDX(reseach development explosive, cyclotrimethylenetrinitramine) were used to formulate the propellant.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.115.1-115.1
• /
• 2011

최근 기본적인 pin 구조의 박막 cell 에서 i layer를 최적화 시키는 방안으로 double layer 구조가 많이 연구되고 있다. 본 연구에서는 ASA(Advanced Semicon ductor Analysis) simulation을 이용하여 i-double layer 최적화에 대한 연구를 진행해 보았다. 두께 150/150nm의 i double layer의 band gap 가변을 한 simulation 결과를 보았을 때, p쪽의 band gap이 상승하면서 intrinsic layer 내의 field가 증가하여 recombination center가 감소하였으나 FF의 감소가 있었다. n쪽의 band gap을 상승 시켰을때 n/i 쪽 field 증가로 Voc가 상승되어 초기 효율이 증가하였으나 intrinsic layer내의 field가 감소하여 recombination center가 오히려 증가하였다. 결과적으로 electric field와 효율을 동시에 고려했을 때 두께 300nm, 1.75의 band gap을 가지는 single layer 보다 150/150nm두께에 1.8/1.7 또는 1.8/1.75의 bandgap을 가지는 double layer를 사용하였을 때 보다 높은 효율을 얻을 수 있었다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.1
• /
• pp.80-83
• /
• 2022

This paper proposes an initial rotor polarity detection algorithm of a single-phase permanent magnet synchronous motor (SP-PMSM) related to stable open-loop starting for sensorless operation. Generally, the SP-PMSM needs an asymmetric air-gap structure to can avoid the initial starting failure at zero torque point. Therefore, the rotor polarity information can be obtained by using the DC offset current direction of a stator current through a high frequency voltage injection into an SP-PMSM with an asymmetric air gap. In this paper, the proposed rotor initial polarity detection algorithm is verified through several experimental results.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.3
• /
• pp.254-260
• /
• 2019

Purpose: To evaluate the relationship between the knee function at 1 year postoperation and the gap difference (90° flexion gap-extension gap) in total knee replacement. Materials and Methods: Eighty-two consecutive osteoarthritis knees that underwent primary total knee replacement using navigation from March 2017 June 2017 were evaluated prospectively. The gap was measured using navigation after reducing the patella with towel clips. After checking the average values of the medial and lateral gaps at extension and 90° flexion knee, the gap difference (90° flexion gap-extension gap) was calculated. The knees were divided into three groups according to the gap difference (gap difference<0 mm, 0 mm≤gap difference<2 mm, 2 mm≤gap difference). The Knee Society score (KSS) and maximal knee flexion were compared at 1 year postoperation among three groups. Results: The numbers of knees according to groups were 37, 29, and 16 knees in regular order. The average of the KSS knee, KSS function, and maximal knee flexion at the 1-year follow-up were 81.21±8.31, 71.34±9.84, and 126.48°±7.28°, respectively. No statistically significant difference in KSS was observed among the 3 groups. The third group (2 mm≤gap difference) showed a larger maximal knee flexion than the other groups in the Mann-Whitney test. Conclusion: The group of total knee replacement (2 mm≤90° flexion gap-extension gap) showed larger maximal knee flexion than the other groups at the 1-year follow-up in statistics.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.658-664
• /
• 2015

Lens designers generally refer to flat image fields and attempt to minimize the field curvature. Present-day CMOS image sensors for mobile phone cameras, however, are not flat, but curved. Sometimes it is necessary to generate an intentional field curvature according to the degree and direction of the CMOS image-sensor’s curvature. This paper presents the degree of curvature of a CMOS image sensor measured using an interferometer, and proposes an effective compensation method that minimizes the net field curvature through optimizing the air gap between lens elements, which is demonstrated using simulations and experiments.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.3
• /
• pp.25-30
• /
• 2011

Flow control of flow field is essential to design efficient elements relating to fluid machineries. In this study, flow characteristics of rectangular prism with center gap through-flow at different aspect ratio was investigated to flow control. It was used a FLUENT 6.3 version to study flow field. It was found that the through-flow disturbs the development of vertical velocity component and decreased the vortex size and critical value of a rapid change in pressure coefficient distribution.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.43-51
• /
• 2017

Purpose: The purpose of this study is to evaluate the dosimetric effects of couch attenuation and air gaps using 3D phantom for prone breast radiation therapy. Materials and method: A 3D printer(Builder Extreme 1000) and computed tomography (CT) images of a breast cancer patient were used to manufacture the customized breast phantom. Eclipse External Beam Planning 13.6 (Varian Medical Systems Palo Alto, CA, USA) was used to create the treatment plan with a dose of 200 cGy per fraction with 6 MV energy. The Optically Stimulated Luminescence Detector(OSLD) was used to measure the skin dose at four points (Med 1, Med 2, Lat 1, Lat 2) on the 3D phantom and ion-chamber (FC65-G) were used to perform the in-vivo dosimetry at the two points (Anterior, Posterior). The Skin dose and in-vivo dosimetry were measured with reference air gap (3 cm) and increased air gaps (1, 2, 3, 4, 5, 6 cm) from reference distance between the couch and 3D phantom. Results: As a result, measurement for the skin dose at lateral point showed a similar value within ${\pm}4%$ compared to the plan. While the air gap increased, skin dose at medial 1 was reduced. And it was also reduced over 7 % when the air gap was more than 3 cm compared to radiation therapy plan. At medial 2 it was reduced over 4 % as well. The changes of dose from variety of the air gap showed similar value within ${\pm}1%$ at posterior. As the air gap was increased, the dose at anterior was also increased and it was increased by 1 % from the air gap distance more than 3 cm. Conclusion: Dosimetrical measurement using 3D phantom is very useful to evaluate the dosimetric effects of couch attenuation and air gaps for prone breast radiation therapy. And it is possible to reduce the skin dose and increase the accuracy of the radiation dose delivery by appling the optimized air gap.

• Development and Reproduction
• /
• v.17 no.1
• /
• pp.63-72
• /
• 2013

A specific inhibitor of RNA polymerase II, ${\alpha}$-amanitin is broadly used to block transcriptional activities in cells. Previous studies showed that ${\alpha}$-amanitin affects in vitro maturation of cumulus-oocyte-complex (COC). In this study, we evaluated the target of ${\alpha}$-amanitin, and whether it affects oocytes or cumulus cells (CCs), or both. We treated ${\alpha}$-amanitin with different time period during in vitro culture of denuded oocytes (DOs) or COCs in comparison, and observed the changes in morphology and maturation status. Although DOs did not show any change in morphology and maturation rates with ${\alpha}$-amanitin treatment, oocytes from COCs were arrested at metaphase I (MI) stage and CCs were more scattered than control groups. To discover causes of meiotic arrest and scattering of CCs, we focused on changes of cumulus expansion, gap junctions, and cellular metabolism which to be the important factors for the successful in vitro maturation of COCs. Expression of genes for cumulus expansion markers (Ptx3, Has2, and Tnfaip6) and gap junctional proteins (Gja1, Gja4, and Gjc1) decreased in ${\alpha}$-amanitin-treated CCs. However, these changes were not observed in oocytes. In addition, expression of genes related to metabolism (Prps1, Rpe, Rpia, Taldo1, and Tkt) decreased in ${\alpha}$-amanitin-treated CCs but not in oocytes. Therefore, we concluded that the transcriptional activities of CCs for supporting suitable transcripts, especially for its metabolic activities and formation of gap junctions among CCs as well as with oocytes, are important for oocytes maturation in COCs.

• Nuclear Engineering and Technology
• /
• v.43 no.5
• /
• pp.447-458
• /
• 2011

This paper proposes an approximated contact force model to identify the nonlinear behavior of a fuel rod with gap supports; also, the numerical prediction of interfacial forces in the mechanical contact of fuel rods with gap supports is studied. The Newmark integration method requires the current status of the contact force, but the contact force is not given a priori. Taylor's expansion can be used to predict the unknown contact force; therefore, it should be guaranteed that the first derivative of the contact force is continuous. This work proposes a continuous and differentiable contact force model with the ability to estimate the current state of the contact force. An approximated convex and differentiable potential function for the contact force is described, and a variational formulation is also provided. A numerical example that considers the particularly stiff supports has been studied, and a fuel rod with hardening supports was also examined for a realistic simulation. An approximated proper solution can be obtained using the results, and abrupt changes from the contacting state to non-contacting state, or vice versa, can be relieved. It can also be seen that not only the external force but also the developed contact force affects the response.