• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.151-156
• /
• 1994

This study is to investigate the quality of superplasticizers in domestic market. Therefore, the physico-chemical characteristics, the fluidity characteristics of fresh cement paste and mortar were tested. Also fresh and hardened properties of mortars and concretes using these superplasticizers were tested. From these results, differences of quality among superplasticizers are checked clearly in low water/cement ratio. And it is concluded that several superplasticizers have better dispersion ability than others in every tests. It has known that all samples are naphtalene sulfornate formaldehede types by the UV(ultra-violet) test.

• 콘크리트학회논문집
• /
• 제13권4호
• /
• pp.305-313
• /
• 2001

본 연구에서는 콘크리트 열전도율의 영향인자에 대하여 TLPP원리를 응용한 QTM-D3 장비를 이용하여 실험을 실시하였고, 이들 실험결과를 이용하여 콘크리트의 열전도율을 예측하는 모델식을 제안하였다. 본 연구를 통하여 얻은 결론은 다음과 같다. 콘크리트, 모르타르 및 페이스트의 열전도율에 미치는 주요 영향인자를 구명하기 위해 본 연구에서 선택된 실험변수는 재령, 골재 함유량, 시멘트 함유량, 결합재 종류, 잔골재율, 시편의 온도 및 함수상태로 총 7가지이다. 이중에서 골재 함유량과 함수상태가 콘크리트 열전도율의 주요 영향인자임을 알 수 있었다. 그리고 시멘트 사용량이 많은 페이스트나 모르타르의 경우 시멘트 함유량이나 결합재 종류에 의해서도 열전도율이 영향을 받고 있다. 그러나 재령은 콘크리트의 열전도율에 큰 영향을 미치지 않음을 알 수 있었다. 콘크리트 열전도율에 주요 영향인자인 골재 함유량, 잔골재율, 시편의 온도 및 함수상태를 이용하여 콘크리트의 열전도율을 계산할 수 있는 모델식을 제안하였다.

• 콘크리트학회논문집
• /
• 제21권5호
• /
• pp.611-617
• /
• 2009

이 연구는 보통포틀랜드시멘트로 제조된 모르타르 및 페이스트 샘플의 황산염침식 저항성을 평가하기 위하여 수행되었다. 주요 실험변수는 사용된 황산염용액의 온도조건으로써, 각각 $4^{\circ}C$, $10^{\circ}C$ 및 $20^{\circ}C$로 유지된 5% 황산나트륨 용액에 침지한 모르타르의 침지재령별 팽창, 압축강도 및 휨강도를 측정 한 후, 황산염침식 저항성을 평가하였다. 뿐만 아니라, XRD, DSC 및 SEM/EDS와 같은 기기분석 기법을 이용하여 저온환경에 노출된 페이스트 샘플 중에 생성된 반응생성물 조사 및 미세구조 분석도 아울러 실시하였다. 실험 결과에 의하면, 황산염침식에 의한 모르타르의 성능 저하는 시험용액 온도에 매우 의존적으로 나타났으며, 특히, 저온환경에서는 쏘마싸이트의 생성으로 인한 성능 저하가 매우 극심하게 나타남을 확인할 수 있었다. 따라서, 저온의 황산염환경에 콘크리트구조물이 노출될 경우 세심한 주의가 요구된다.

• Advances in concrete construction
• /
• 제10권5호
• /
• pp.381-391
• /
• 2020

This study aimed to develop reference materials (RMs) for mortar that can simulate the initial flow characteristics with constant quality over a long period. Through the previous research on the development of RMs for cement paste, the combination of limestone, glycerol, and water was used as the basic matrix for developing RMs for mortar in this study. In addition, glass beads of three particle sizes (0.5, 1.0, and 2.0 mm) and ISO standard sand were selected as tentative candidates to derive fine aggregate substitutes. The mixture of glass beads could simulate the initial flow characteristics of mortar, but under the same mixing ratio, replicates showed an unstable tendency to indicate inconsistent values due to the generation of electrostatic properties between materials and equipment. On the other hand, the mixture using ISO standard Sand not only simulates the constant flow characteristics for a long period of time, but also shows stable results with little error in replicates. Therefore, limestone, glycerol, ISO standard sand, and water were finally determined as components that met the required properties of RMs for mortar. The effect of each component on the flow characteristics of RMs was analyzed. It was found that glycerol increased the cohesion between the particles of standard sand, resulting in a constant increase both in the plastic viscosity and yield stress. Both limestone and standard sand had a dominant effect on the yield stress. The relationships between various mortar mixing ratios and the corresponding mixing ratios of RMs were established. In addition, the results of the verification experiment showed that the rheological properties of the RMs obtained through the relationships correlated with various water/cement ratios and the fine aggregate volume fractions of mortar obtained with same manner. In other words, the RMs for mortar developed in this study can be used as standard samples because they can simulate the initial flow characteristics of mortar of various mixing ratios for a long period without any chemical changes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.136-145
• /
• 1997

The purpose of this study is to develope of alternative adimixture for manufacture of PHC pile(compressive strength above 800kg/$\textrm{cm}^2$). For the investigation, properties of alternative admixture admixed with II-anhydrite and pozollanic fine powders(e.q., Fly-ash, Silica-Fume), the fluidity and viscosity in the cement pastes, the fluidity and compressive strength in mortars at steam curing condition, were respectively examined. Also, properties of compressive strength of concretes with exiting admixture(specimen name SM) and alterantive admixture(specimen name AP) for PHC pile, at steam and standard curing condition, were compared each other. As a result of this experimental study, it was found that specimens admixed with II-anhydrite and pozollanic fine powders had an increase on the fluidity of cement paste and mortar, and compressive strength of mortar and concrete was as good as concrete with SM.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.133-134
• /
• 2021

In this study, the effects of aggregates on the properties of concrete as a study to determine the mechanical properties of high-temperature damaged concrete were examined. The samples to be reviewed are cement paste, mortar, and concrete, and the strength characteristics were reviewed after heating the compression strength and tensile strength properties. The increase in magnetic shrinkage at around 100℃ showed a significant drop in strength in mortar, which does not contain aggregates or has a small diameter, and after 300℃, concrete showed a sharp drop in strength due to the hydration and aggregation of cement.

• International Journal of Concrete Structures and Materials
• /
• 제3권2호
• /
• pp.81-90
• /
• 2009

This paper proposes a semi analytical model to describe the pore structure of concrete by a set of simple equations. The relationship between the porosity and the microstructure of concrete has been considered when constructing the analytical model. The microstructure includes the interface transition zone (ITZ) between aggregates and cement paste. The predicting model of porosity was developed with considering the ITZ for various mixing of mortar and concrete. The proposed model is validated by the rapid experimental programs. Although the proposed model is semi-analytical and relatively simple, this model could be reasonably utilized for the durability design and adapted for predicting the service life of concrete structures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.715-718
• /
• 2005

The purpose of this paper is to investigate on hydration, setting time and compressive strength properties of cement paste mixed alkali-free accelerator using aluminum sulfate for shotcrete. The experimental focus is to variouse added element with alkali-free accelerator for shotcrete using aluminum sulfate. When diethanolamine was used as a component of alkali-free accelerator, alkali-free accelerator contributed to increasing early hydration, setting time and compressive strength properties of cement paste and mortar.

• 대한토목학회논문집
• /
• 제37권4호
• /
• pp.637-645
• /
• 2017

제주도는 여러 차례의 화산활동에 의해 형성된 섬으로 불규칙한 화산암층 구조를 가지고 있다. 해상풍력발전기와 같은 구조물은 기초에서부터 하중 작용점까지의 거리가 멀고 상대적으로 큰 수평하중이 작용하여 매우 큰 전도모멘트를 지지해야 한다. 이러한 구조물을 경제적으로 지지하기 위해서는 암반층이라도 말뚝기초를 시공해야 한다. 따라서 본 연구에서는 암반매입말뚝을 위한 주면고정액의 적정배합비를 찾기 위하여 물, 시멘트, 모래의 배합비를 달리하여 역학적 성능을 평가하고, 실험 결과와 기존 연구 결과를 비교분석하였다. 동일한 배합조건에서 시멘트풀과 소일시멘트보다 모르타르(잔골재 비=20~40%)의 역학적 성능이 우수하게 나타났다. 이 결과를 바탕으로 적정배합범위와 강도추정식을 제안하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.118-119
• /
• 2021

In this study, we confirmed the basic characteristics of paste and mortar 1:1, 1:2, 1:3 composition using concrete sludge solid content for the purpose of developing a resource-recycling cement secondary products. The 1:2 mortar formulation showed the best compressive strength. The steam curing strength is superior in the order of C20, BS40, BS20 and Control. it is judged that the FA combination is not suitable.