• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.279-286
• /
• 2018

그라우팅공법은 지반강화와 차수를 위한 공법으로 약액을 주입하여 지반을 고화시키는 것이다. 시멘트계 그라우트 주입재는 수세기 전부터 보통 포틀랜드 시멘트를 사용하였으나 시멘트 입경이 커 주입효과에 한계가 있다. 이에 본 연구는 초미립자 시멘트가 사용된 암반지반에서의 그라우팅 주입효과를 분석하기 위함이다. 이를 위해 초미립자 시멘트로 3S-1호가 사용되었고, OPC와 3S-1호를 각각 적용하여 암반그라우팅 현장시험시공을 실시하였으며 수압시험 공내재하시험 주입시험을 통해 그 결과를 비교분석 하였다. 시험 결과, 암반지반에서는 OPC보다 초미립자 시멘트(3S-1호)를 사용하는 것이 차수효과(K, $10^{-6}cm/sec$)가 더 높으며 보강효과도 확인할 수 있었다. 또한 초미립자 시멘트(3S-1호)가 OPC보다 약 4~9배 주입성이 더 높은 것으로 나타났다. 따라서 본 연구는 암반그라우팅 시공시 OPC대신 초미립자 시멘트를 적용하는 것이 더 유리한 것으로 판단이 된다.

• 한국지반환경공학회 논문집
• /
• 제10권2호
• /
• pp.51-59
• /
• 2009

본 연구는 댐 4개소의 기초지반에 실시된 암반 그라우팅에 대한 현장 시험결과를 통하여 RQD, 단위시멘트주입량, Lugeon값(Lu) 및 최대주입압력과의 상관관계를 비교 분석하였다. 본 연구현장에 대하여 댐 기초지반에서 암반 그라우팅을 실시한 후 차수성에 관한 개량효과 분석결과 변성암지역이 퇴적암지역 보다 우수한 것으로 조사되었다. 그리고 압밀(Consolidation) 그라우팅의 차수효과가 차수(Curtain) 그라우팅 보다 우수한 것으로 나타났다. 단위시멘트주입량은 RQD가 클수록 증가하는 경향을 보이나, Lugeon값은 RQD와 무관한 관계를 나타내고 있다. Lugeon값과 단위시멘트주입량(Vc)의 관계는 서로 비례하고 비교적 투수성이 큰 퇴적암 지역에서의 상관관계가 Lu = 0.22Vc인 직접적인 비례관계를 보였다. 기 시공된 인접공의 영향은 차수 그라우팅 보다 압밀 그라우팅이 큰 것으로 조사되었다. 그리고 주입순서에 따른 단위시멘트주입량과 Lugeon값의 변화는 거의 동일한 거동을 나타내고 있다.

• Geomechanics and Engineering
• /
• 제13권2호
• /
• pp.333-352
• /
• 2017

A comparison study is made between the dynamic properties of an argillaceous siltstone and its grouting-reinforced body. The purpose is to investigate how grout injection can help repair broken soft rocks. A slightly weathered argillaceous siltstone is selected, and part of the siltstone is mechanically crushed and cemented with Portland cement to simulate the grouting-reinforced body. Core specimens with the size of $50mm{\times}38mm$ are prepared from the original rock and the grouting-reinforced body. Impact tests on these samples are then carried out using a Split Hopkinson Pressure Bar (SHPB) apparatus. Failure patterns are analyzed and geotechnical parameters of the specimens are estimated. Based on the experimental results, for the grouting-reinforced body, its shock resistance is poorer than that of the original rock, and most cracks happen in the cementation boundaries between the cement mortar and the original rock particles. It was observed that the grouting-reinforced body ends up with more fragmented residues, most of them have larger fractal dimensions, and its dynamic strength is generally lower. The mass ratio of broken rocks to cement has a significant effect on its dynamic properties and there is an optimal ratio that the maximum dynamic peak strength can be achieved. The dynamic strain-softening behavior of the grouting-reinforced body is more significant compared with that of the original rock. Both the time dependent damage model and the modified overstress damage model are equally applicable to the original rock, but the former performs much better compared with the latter for the grouting-reinforced body. In addition, it was also shown that water content and impact velocity both have significant effect on dynamic properties of the original rock and its grouting-reinforced body. Higher water content leads to more small broken rock pieces, larger fractal dimensions, lower dynamic peak strength and smaller elastic modulus. However, the water content plays a minor role in fractal dimensions when the impact velocity is beyond a certain value. Higher impact loading rate leads to higher degree of fragmentation and larger fractal dimensions both in argillaceous siltstone and its grouting-reinforced body. These results provide a sound basis for the quantitative evaluation on how cement grouting can contribute to the repair of broken soft rocks.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.581-590
• /
• 2005

The grouting method is widely used as the impermeable effect and ground reinforcement in construction. But, it has a problem that cement and grout material are not mixed well in the injection tip equipment and an opposite flow and interception state of the chemical grouting is happened. so, continuous work is difficult. McG method installed a special grouting and device, made possible go well mixing of grouting material and prevent flowing backward and block of nozzle also diversify powder rate of cement that is grouting material to select sutible material in layer conditions. YSS that lowered $Na_2O$ influencing durability and circumstance is developed by gel-forming reaction material. so eco-circumstance and durability is increased by minimizing dissolution of underground water. In this study, it is assumed that seepage state of the injection material using a special injection tip equipment and a unconfined compressive strenth by mixing a various injection material of various. And it is confirmed that strenth increase effect and permeable decrease of the improved body through the test execution and field execution.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.110-113
• /
• 2002

Statistical- based, principal component analysis (PCA) was applied to chemical data from two underground storage systems containing LPG to assess the usefulness of such technique at the initial stage (Pyeongtaek) or middle stage (Ulsan) of hydrochemical studies. For the first case, both natural and anthropogenic contamination characterize regional groundwater. Saline water buffered by Namyang lake affects as a natural factor, whereas cement grouting influence as an artificial factor. For the second study area, contaminations due to operation of LPG caverns, such as disinfection activity and cement grouting effect, deteriorate groundwater quality. This study indicates that principal component analysis would be particularly useful for summarizing large data set for the purpose of subsurface characterization, assessing their vulnerability to contamination and protecting recharge zones.

• Geomechanics and Engineering
• /
• 제20권1호
• /
• pp.67-73
• /
• 2020

With the increasing number of underground projects, the problem of rock-water coupling catastrophe has increasingly become the focus of safety. Grouting reinforcement is gradually applied in subway, tunnel, bridge reinforcement, coal mine floor and other construction projects. At present, cement-based grouting materials are easy to shrink and have low strength after solidification. In order to overcome the special problems of high water pressure and high in-situ stress in deep part and improve the reinforcement effect. In view of the mining conditions of deep surrounding rock, a new type of cement-based reinforcement material was developed. We analyses the principle and main indexes of floor strengthening, and tests and optimizes the indexes and proportions of the two materials through laboratory tests. Then, observes and compares the microstructures of the optimized floor strengthening materials with those of the traditional strengthening materials through scanning electron microscopy. The test results show that 42.5 Portland cement-based grouting reinforcement material has the advantages of slight expansion, anti-dry-shrinkage, high compressive strength and high density when the water-cement ratio is 0.4, the content of bentonite is 4%, and the content of Nano Silica is 2.5%. The reinforcement effect is better than other traditional grouting reinforcement materials.

• Geomechanics and Engineering
• /
• 제37권2호
• /
• pp.97-107
• /
• 2024

The accurate prediction of grouting upward diffusion height is crucial for estimating the bearing capacity of tip-grouted piles. Borehole construction during the installation of bored piles induces soil unloading, resulting in both radial stress loss in the surrounding soil and an impact on grouting fluid diffusion. In this study, a modified model is developed for predicting grout diffusion height. This model incorporates the classical rheological equation of power-law cement grout and the cavity reverse expansion model to account for different degrees of unloading. A series of single-pile tip grouting and static load tests are conducted with varying initial grouting pressures. The test results demonstrate a significant effect of vertical grout diffusion on improving pile lateral friction resistance and bearing capacity. Increasing the grouting pressure leads to an increase in the vertical height of the grout. A comparison between the predicted values using the proposed model and the actual measured results reveals a model error ranging from -12.3% to 8.0%. Parametric analysis shows that grout diffusion height increases with an increase in the degree of unloading, with a more pronounced effect observed at higher grouting pressures. Two case studies are presented to verify the applicability of the proposed model. Field measurements of grout diffusion height correspond to unloading ratios of 0.68 and 0.71, respectively, as predicted by the model. Neglecting the unloading effect would result in a conservative estimate.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.352-361
• /
• 2006

The grouting method is widely used in construction to reduce permeability and reinforce the ground. If the cement and grout material are not mixed well in the injection tip equipment, an opposite flow and Interception state of the chemical grouting can occur. McG method installs a special grouting device to allow better mixing of the grouting material and prevent backward flow. The block of nozzle also diversify powder rate of cement. YSS that lowers $Na_2O$ and thereby increases durability is developed by gel-forming reaction material. In this study, the seepage state and unconfined compressive strength of the injection material using the special injection tip equipment is tested. The results of laboratory and field tests clearly demonstrate that the strength increases and permeability decreases using the McG method.

• 한국지반신소재학회논문집
• /
• 제17권4호
• /
• pp.1-10
• /
• 2018

쏘일네일링 공법은 일반적으로 중력식 그라우팅 방법으로 사용되고 있으나, 그라우팅으로 인한 공동발생 및 충진 불량 문제를 해결하고자 최근에는 가압식 쏘일네일링 공법의 개발과 적용사례가 증가하고 있다. 가압식 그라우팅은 일반적으로 포틀랜트 시멘트와 물을 혼합하여 사용하나 소요강도 발현까지 10일 이상 걸리기 때문에 초속경 시멘트를 혼합하여 사용하고 있다. 이에 이 논문에서는 가압식 그라우팅 주입시간을 고려하여 적정 겔타임이 확보되는 초속경 시멘트 혼합비 30%가 가압식 쏘일네일링을 하기에 적합하다고 판단하였다. 화강풍화토 지반을 대상으로 모형토조를 제작하여 네일체의 인발실험을 한 결과, 주입시간 10초에서는 변형률 15% 일 때의 인발력이 5.7kN으로 중력식과 비교하였을 때 약 1.5배의 보강효과가 나타났다. 압력시간을 10초, 20초, 30초, 40초의 조건으로 달리할 경우에는 주입시간 증가에 따른 마찰저항력이 선형적으로 증가하나, 한계주입압력을 넘는 수준의 주입시간에서는 수압파쇄 효과로 인해 마찰저항력이 감소하는 것을 확인하였다. 또한, 수치해석을 통하여 무보강 사면과 중력식, 가압식 쏘일네일링으로 보강된 사면의 안정을 비교분석 하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.836-843
• /
• 2009

The Water Glass grouting method has been applied frequently to impermeable grouting in practice. But there is raising problems which are durability decrease by passage time and environmentally adverse effect. So, Earth Natural Grouting method which uses micro cement is developed to overcomes the problems of the Water Glass grouting method. And it is displayed ground injection extent like Water Glass grouting method. For verifying impermeability of ENG, it is carried out a triaxial permeability test about manufacturing specimen of ENG, SGR method which is a presentative Water Glass grouting method. Although Coefficient of permeability, k, of SGR is measured a little high than k of ENG whose value is $a{\times}10^{-6}cm/sec$, the value of ENG belong to impermeable rage. And, k of SGR shows relatively rapid increase according to cure time due to durability decrease of water glass. Also, in-situ test result of ENG has similar value with SGR method for similar ground.