• 펄프종이기술
• /
• 제45권4호
• /
• pp.27-33
• /
• 2013

Manufacturing fabrics from dissolving cellulosic pulp is increasing in these days. For making high quality of cellulose-based fabrics, control of cellulose DP (degree of polymerization), its alpha cellulose content, its brightness, and its crystallinity are important. To process the cellulosic raw material, refining of cellulosic fibers is essential, and it is important to know if refining affects those important cellulose properties. The effects of PFI mill and Valley beater refining on the alpha-cellulose content, cellulose DP, crystallinity, and paper mechanical properties of wood and two different cotton fibers were studied. The results showed that PFI mill refining rarely affected those properties. Fibers refined by a Valley beater displayed a small reduction in fiber length in comparison with those refined by a PFI mill. However, the Valley beater refining method produced almost no changes in cellulose properties, either. The refining process seemed to have very little effect on the cellulose DP, crystallinity index, or alpha-cellulose content until the freeness decreased to around 300 mL CSF for wood and 100 mL CSF for cotton fibers, respectively. There were also no differences in tensile strength development in two refining methods.

• 펄프종이기술
• /
• 제45권3호
• /
• pp.59-68
• /
• 2013

The cotton contains various impurities such as protein, wax, pectins, coloring matter, even though cotton has been a major source of pure cellulose. The purification processes have been commonly applied to obtain the pure cellulose. However the excessive purification treatments could lead to the damage in the cellulose structure which could result in the degradation of cellulose and the limited application of cotton cellulose. In this study, the changes in cellulose structural properties such as crystallinity and DP(degree of polymerization) by the various conditions of the purification processes were investigated. The less toxic agents such as hydrogen peroxide and sodium silicate were applied for the purification treatment in this study. The increase in the process times, the temperature and the applied amount of chemical agents resulted in the more purified cellulose. The DP of cotton cellulose was increased at the first weak conditions by the reduction of small molecules such as pectin, wax, and so on. Especially the 2 % addition amount of $H_2O_2$ with $Na_2SiO_3$ resulted in the higher value in the DP and the brightness compared to the 1.5 % addition amount of $H_2O_2$. However, the 4 % addition amount of $H_2O_2$ with $Na_2SiO_3$ showed the decreased value because of excessive treatment. In case of the changes in the crystallinity (Gjk), the highest value of the crystallinity was obtained by the 2% addition amount of $H_2O_2$ on the cotton cellulose, which showed similar with the change in the DP.

• 펄프종이기술
• /
• 제42권5호
• /
• pp.62-66
• /
• 2010

Cellulosic materials were dissolved by NMMO(N-methylmorpholine-N-oxide) and CED (Cupriethylene diamine), respectively, to measure their DPs (degrees of polymerization) by using viscometer. We changed cellulose DPs by applying various amounts of low intensity electron-beam radiation to the cellulosic materials. NMMO is environmental-friendly, non-toxic, and biodegradable organic cellulose solvent and used industrially because of its high cellulose dissolving power and high solvent recovery ratio. The cellulose DP measurement results using these two different chemicals were correlated highly ($R^2$ >0.95). It was also found that cellulose with high DP was dissolved more easily in NMMO than CED. In addition, NMMO method gave more higher resolution in the measurement.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.508-514
• /
• 2010

Regenerated cellulose fibers were prepared from three pulps containing different degree of polymerization(DP) and $\alpha$-cellulose contents by dry-jet wet spinning technique with cellulose dope in N-methylmorpholin N-oxide (NMMO). The effect of antioxidant, n-propyl gallate (PG) on the properties of different regenerated celluloses was studied using X-ray diffraction, copper number calculation, and viscometry. The degradaqtion of regenerated cellulose from pulp containing higher DP and lower $\alpha$-cellulose content was occurred more seriously. The tensile strength and initial modulus of regenerated cellulose fiber obtained from NMMO dope with PG were higher than those of fiber obtained from NMMO dope without PG. All fibers showed the round shape cross section and typical cellulose II crystalline structure.

• 펄프종이기술
• /
• 제45권3호
• /
• pp.27-35
• /
• 2013

Cotton linter pre-treatment methods using electron beam and sulfuric acid were investigated to prepare high quality regenerated fibers for fabrics. So far, NaOH was used to reduce the degree of polymerization (DP) of the cotton linter for ease of dissolving by cellulose solvent. Two pre-treatment methods were developed to reduce the consumption of the chemicals (NaOH) and to control the DP of cellulose more precisely. Changes in ${\alpha}$-cellulose contents and brightness by the pre-treatments were also important concerns. Both electron beam irradiation and sulfuric acid were shown to be effective on controlling the DP of cellulose and to reduce the chemical consumption, but reduced ${\alpha}$-cellulose contents as well in this study. Sulfuric acid pre-treatment, which needed additional washing process after the pre-treatment when comparing to the electron beam irradiation method, gave the highest brightness and the highest reduction of ${\alpha}$-cellulose content.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.428-433
• /
• 2009

Cellulose triacetate (CTA) was prepared from cotton linter and pulps which contain various contents of $\alpha$-cellulose. CTA which contains 2.8 of degree of substitution (DS) and 222 of degree of polymerization (DP) was obtained from V-81 pulp under the heterogeneous system. The DS was measured by the titration method, and the DP was obtained by measurement of viscosity. FT-IR spectometer (FT-IR 6300, JASCO) was used to analyze the chemical structure of raw materials and cellulose triacetate, and X-ray diffractometer (X-pert MPD PW3040, Philips) was used to confirm the crystal structure and to calculate the relative crystallinity index (RCI). As $\alpha$-cellulose content in pulp increased, the acetylation yield increased. Besides with a kind of pulp, it contains insoluble residue which was mainly formed due to the formation of glucomannan triacetate and xylan diacetate during the esterification.

• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.341-346
• /
• 2008

Cellulose nanofibers from microfibril cellulose (MFC) was prepared by hydrobromic acid (HBr) treatment at different concentrations. Polyvinyl alcohol (PVA) composite films at various loading level of nanofibers were manufactured by a film casting method. The analysis of degree of polymerization (DP), crystallinity ($X_c$) and molecular weight ($M_w$) of cellulose after acid treatment was conducted. The mechanical and thermal properties of the cellulose nanofibers reinforced PVA films were characterized using tensile tests and thermogravimetric analysis (TGA). The DP and $M_w$ of MFC by HBr hydrolysis considerably decreased, but $X_c$ showed no significant change. After acid hydrolysis, the diameter of cellulose nanofibers was in the range of 100 to 200 nm. The thermal stability of the films was steadily improved with the increase of nanofiber loading. There was a significant increase in the tensile strength of PVA composite films with the increase in MFC loading. Finally, 5 wt.% nanofiber loading exhibited the highest tensile strength and thermal stability of PVA composite films.

• 한국인쇄학회지
• /
• 제30권3호
• /
• pp.13-21
• /
• 2012

This study was carried out to evaluate the stability of archival documents produced using papers. The properties of archival documents depend on the type of fillers of papers that are used such as fiber, non cellulose fiber, and mineral. The physio-chemical characteristics of archival documents were analyzed by employing acid hydrolysis against cellulose fiber substances. Fibers of Korean hand-made (Hanji), flex, and cotten papers showed higher pH and the degree of polymerization (DP) than wood fiber and mechanical fiber. Mechanical pulp containing 12.8% of lignin showed the greatest decrease of DP due to acid hydrolysis, and this resulted in increase of degree of aging. The filler found to clay and talc did not contain metal such as $Fe^{+2}$, $Fe^{+3}$, and $Cu^{+2}$. The alkaline metals such as Mg, Ca, and Ti showed greater resistance to acid hydrolysis.

• 미생물학회지
• /
• 제16권1호
• /
• pp.30-40
• /
• 1978

Detergent soluble fractions were obtained from T. ferrooxidans ATCC 13598 and the T. thiooxidans ATCC 8085 which were treated with 3% of Tween 20. The detergent soluble antigen(crude antigen) fractions of the T.ferrooxidans and the T.thiooxidans were subjected to hydroxyapatite. In the case of T.thiooxidans, further purification was carried out on the DEAE-cellulose column chromatography. The antigen fractions, such as the hydroxyapatite peak-1(Tf, HA-1) and peak-2 from T.ferrooxidans(Tf. HA-2) and hydroxyapatite peak-1(Tt, HA-1), DEAE-cellulose peak-1(Tt, DP-1) and peak-2(Tt, DP-2) from T. thiooxidans wre compared each other with the homologous and the heterologous and the heterologous antisera against to the Thiobacillus species. The hydroxyapatite peak-2 fraction from the T.ferrooxidans(Tf, HA-2) and DEAE-cellulose peak-2 fraction from the T.thiooxidans(Tt, DP-2) were represented the type-specific immuno-reactivities between the T.ferrooxidans and the T.thiooxidans on the several sets of double gel diffusioin analysis. The type-specific antigen fractions from both of the baceteria were mainly composed of protein with entierly different electrophoretic mobility on the SDS-polyacrylamide gel electrophoresis. However, the PAS positive banding patterns on the electrophorogram showed wide range of common antigenic properties in the T. ferrooxidans and the T.thiooxidans, respectively.

• 펄프종이기술
• /
• 제44권3호
• /
• pp.79-85
• /
• 2012

In this study, purified cellulose was prepared from rice husk which is one of the major agricultural residues in Korea. The various bleaching processes such as ozone bleaching, $ClO_2$ bleaching and $H_2O_2$ bleaching were applied to remove residual lignin and impurities. In order to increase the contents of ${\alpha}$-cellulose contents, the effects of acid and alkali treatments were evaluated. Although the multi stages of the bleaching processes resulted in less than 0.5 % residual lignin contents, the application of ozone leaded to the decrease in DP(degree in Polymerization) and ${\alpha}$-cellulose contents. The alkali treatment after bleaching processes resulted in pure cellulose which showed more than 98% of ${\alpha}$-cellulose contents.