• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.2
• /
• pp.261-272
• /
• 2013

Algae boom (Red tide) in south coastal area of Korea has been appeared several times during a decade. If algae boom appears in the desalination plant, media filter and UF filter are clogged quickly, and the plant should be shutdown. In general, Algae can be removed from water by flotation better than by sedimentation, because of the low density of algal cell. The purpose of this study conducts the CFD simulation of DAF flotation basin to apply the design of the dissolved air flotation with ball filter in the Test Bed for SWRO desalination plant. In this study, Eulerian-Eulerian multiphase model was applied to simulate the behavior of air bubbles and seawater. Density difference model and gravity were used. But de-sludge process and mass transfer between air bubbles and seawater were ignored. Main parameter is hydraulic loading rate which is varied from 20 m/hr to 27.5 m/hr. Geometry of flotation basin were changed to improve the DAF performance. According to the result of this study, the increase of hydraulic loading rate causes that the flow in the separation basin is widely affected and the concentration of air is increased. The flow pattern in the contact zone of flotation basin is greatly affected by the location of nozzle header. When the nozzle header was installed not the bottom of the contact zone but the above, the opportunity of contact between influent and recycle flow was increased.

• Elastomers and Composites
• /
• v.58 no.1
• /
• pp.32-43
• /
• 2023

The worldwide use of polyurethane foam products generates large amounts of waste, which in turn has detrimental effects on the surroundings. Hence, finding an economical and environmentally friendly way to dispose of or recycle foam waste is an utmost priority for researchers to overcome this problem. In that sense, the glycolysis of waste flexible polyurethane foam (WFPF) from automotive seat cushions using different industrial-grade glycols and potassium hydroxide as a catalyst to produce recovered polyol was investigated. The effect of different molecular weight polyols, catalyst concentration, and material ratio (PU foam: Glycols) on the reaction conversion and viscosity of the recovered polyols was determined. The obtained recovered polyols are obtained as single or split-phase reaction products. Besides, the foaming characteristics and physical properties such as cell morphology, thermal stability, and compressive stress-strain nature of the regenerated flexible foams based on the recovered polyols were discussed. It was observed that the regenerated flexible foams displayed good seating comfort properties as a function of hardness, sag factor, and hysteresis loss compared to the reference virgin foam. With the growing demand for a sustainable and circular economy, a global valorization of glycolysis products from polyurethane scraps can be realized by transforming them into profitable substances.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.5 no.1
• /
• pp.43-52
• /
• 1997

This study was conducted to analysis citizen's attitude and style to the foodwaste from loth Sept. to 30th Sept. in 1996. The research was used questionare method and the analysis was used prequency analysis and cross table method by SPSS (scientific statistics). they answered that the most serious environment problem was waste problem and the best way to settle waste problem was to reduce waste production itself. And they answered that to settle environment problems, it was most important for us to change our life style. But It was not agreed between consciousness and action(execution). Because most of the food-related waste was among household waste, it's settlement was the most importment thing than any other. Nevertheless the seperation of waste was essential to effective incineration, the seperation process was not actually conducted and only a few housewife knew the difference of incinerable and non-incinerable waste. The recycling for the disused dry-cells and garbage is not completly. But we think that if the effective government's recycling counterplan for wastes, foodwaste or wasted dry cell, etc., is estabilished, rates of seperation and collection was increasing. Much usuage of onetime vinyl bag for shopping was become the one of the main cause in increasing the package waste, and so it was needed to use the longlife shopping basket.

• KSBB Journal
• /
• v.10 no.3
• /
• pp.304-316
• /
• 1995

For fuel alcohol production, enzymatic liquefaction and saccharification of tapioca starch by ${\alpha}$-amylase and glucoamylase were studied. The thermophilic ${\alpha}$-amylase Termamyl produced from Bacillus licheniformis gave a better liquefaction than the relalively low temperature enzyme BAN from B. subtilis. Oplimal temperature and pH with Termamyl were $90∼95^{\circ}C$ and 5.8, respectively. Minimal amount of Termamyl 240uc for a satisfactory liquefaction for a two-hour reaction was about 0.0125% (v/w) with respect to the mass of tapioca used. For saccharification experiments two enzymes, Novo AMG and Do-I1 enzymes were compared. The enzymatic activity of each enzyme was a little different depending on the substrate used and the latter was found to have a significant amount of ${\alpha}$-amylase activity. With Novo AMG optimal temperature was about $58^{\circ}C$ The pH optimum was 4.3 with maltose, however, with tapioca, no difference was observed between pH 4.3 and 5.7 which is a natural, unadjusted pH of liquefied tapioca. For 85% of completion of saccharification, it was necessary to use 0.0625% (v/w) of Novo AMG 400L for tapioca and to run the reaction for more than 10 hr, Packed volume of solid particles in tapioca slurry remained at around 30% during liquefaction and saccharification. This indicates that the removal of the solid particle before fermentation is not economically feasible at all, even though the solid particles make it very difficult to operate the bioreactor in a continuous mode with cell-recycle.

• Journal of Sericultural and Entomological Science
• /
• v.46 no.1
• /
• pp.23-27
• /
• 2004

We were investigated the cognitive ability enhancement in rats using B. mori fibroin molecular controlled hydrolysate by preparative recycle HPLC system. Also, some of its physicochemical properties and free amino acid components were investigated, too. Nuclear magnetic resonance (NMR) spectrum are measured different pattern between high (HF) and low (LF) molecular controlled B. mori fibroin samples, respectively. The in vitro test by neuron primary cell culture are showed dependent on molecular weight (Mw) of B. mori fibroin in the order of LF > MF > HF, too. However, the memorial effects in rats by in vivo test are large dependent molecular weight on that maximum 50% than control. Also, the memorial effect was higher than the enzymatic relative and acid hydrolysate, which was 50.0$\pm$2.1 and 25.9$\pm$0.32%, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.5
• /
• pp.25-31
• /
• 2009

A low power SRAM using supply voltage charge recycling (SVCR-SRAM) scheme is proposed. It divides into two SRAM cell blocks and supplies two different powers. A supplied power is $V_{DD}$ and $V_{DD}/2$. The other is $V_{DD}/2$ and GND. When N-bit cells are accessed, the charge used in N/2-bit cells with VDD and $V_{DD}/2$ is recycled in the other N/2-bit cells with $V_{DD}/2$ and GND. The SVCR scheme is used in the power consuming parts which bit line, data bus, word line, and SRAM cells to reduce dynamic power. The other parts of SRAM use $V_{DD}$ and GND to achieve high speed. Also, the SVCR-SRAM results in reducing leakage power of SRAM cells due to the body-effect. A 64K-bit SRAM ($8K{\times}8$bits) is implemented in a $0.18{\mu}m$ CMOS process. It saves 57.4% write power and 27.6% read power at $V_{DD}=1.8V$ and f=50MHz.

• Clean Technology
• /
• v.22 no.4
• /
• pp.274-280
• /
• 2016

In this study, it was to develop a chemical method that can recycle the cutting oil which accounts for about 25% of the cost of the process among containing materials of silicon waste sludge generated in the process for producing a solar cell wafer. The 7 types of reagents have been used, including acetone, HCl, NaOH, KOH, $Na_2CO_3$, HF, $CH_2Cl_2$, etc. for this experiment. And It was carried out at a speed of 3000 rpm for 60 minutes centrifugation after performing a reaction with a waste sludge at various concentrations. As a result, the best reagents and conditions for separating the solid such as a silicon powder and a metal powder and liquid cutting oil were identified as 0.3 N NaOH. It is found to be pH 6.05 in a post-processing recycled cutting oil with 0.3 N NaOH after reaction of waste sludge and 0.1 N HCl which is effective to remove metal powder in order to adjust the pH to suit the properties of the weak acid is a commercially available cutting oil and it showed excellent turbidity than when applied to sludge with 0.3 N NaOH alone. The results of FT-IR analysis which can compare the properties of the commercially available cutting oil shows it has a possibility of recycling oil. The cutting oil recovery rate obtained through the experiment was found to be 86.9%.