• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.183-187
• /
• 2008

This paper describes a power control scheme to improve the performance of a fuel cell battery hybrid power source for residential application. The proposed power control scheme includes a power control strategy to control the power flow of the fuel cell hybrid power system and a digital control technique for a front-end dc-dc converter of the fuel cell. The power control strategy enables the fuel cell to operate within the high efficiency region defined by the polarization curve and efficiency curve of the fuel cell. A dual boost converter with digital control is applied as a front-end dc-dc converter to control the fuel cell output power. The digital control technique of the converter employs a moving-average digital filter into its voltage feedback loop to cancel the low frequency harmonic current drawn from the fuel cell and then limits the fuel cell output current to a current limit using a predictive current limiter to keep the fuel cell operation within the high efficiency region as well as to minimize the fuel cell oxygen starvation.

• KSBB Journal
• /
• v.13 no.4
• /
• pp.411-417
• /
• 1998

The possibility of application of membrane type immobilized adsorbent to the fed-batch or perfusion culture system with anchorage-independent cells as well as batch system was investigated. The improvement in cell density and cell viability due to the combination of immobilized adsorbent with each culture system was evaluated for the investigation, and the optimum culture system employing immobilized adsorbent system was suggested based on the results. It was observed that the system with immobilized adsorbent showed better cell growth and cell viability than that without immobilized adsorbent in every operation system of batch, fed-batch, and perfusion. In case of batch system, 200% improvement of maximum cell density was observed in the system where ammonium chloride was added on purpose. And 50% improvement of maximum cell density was observed in the fed-batch system where ammonium ion accumulates significantly, while small increase in maximum cell density was observed in the perfusion system where dilution of waste byproducts exists. Especially, the fed-batch system showed the most significant improvement on cell growth because both compensation of nutrient and removal of ammonium ion occurred simultaneously in the system. Therefore a combined system of immobilized adsorbent and fed-batch operation could be suggested as an optimum system with in situ removal of ammonium ion.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.2
• /
• pp.94-103
• /
• 2019

Self Organizing Map (SOM) is a neural network that is effective in classifying patterns that form the feature map by extracting characteristics of the input data. In this study, we propose an algorithm to determine the cell formation and the machine layout within the cell for the cell formation problem with operation sequence using the SOM. In the proposed algorithm, the output layer of the SOM is a one-dimensional structure, and the SOM is applied to the parts and the machine in two steps. The initial cell is formed when the formed clusters is grouped largely by the utilization of the machine within the cell. At this stage, machine cell are formed. The next step is to create a flow matrix of the all machine that calculates the frequency of consecutive forward movement for the machine. The machine layout order in each machine cell is determined based on this flow matrix so that the machine operation sequence is most reflected. The final step is to optimize the overall machine and parts to increase machine layout efficiency. As a result, the final cell is formed and the machine layout within the cell is determined. The proposed algorithm was tested on well-known cell formation problems with operation sequence shown in previous papers. The proposed algorithm has better performance than the other algorithms.

• IMMUNE NETWORK
• /
• v.10 no.3
• /
• pp.81-84
• /
• 2010

B cells, by virtue of their diverse roles in immune responses to foreign and self antigens, have become of increasing interest to the clinician as well as the basic immunologist. In particular, it is now apparent that the development of B cell unresponsiveness in antibody and T cell mediated autoimmune disorders and the transplant setting is both worthwhile and achievable.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.647-651
• /
• 1987

Yeast biomass in a biological continuous stirred tank reactor was controlled with an APPLE II microcomputer using adaptive control theory of bilinear systems. The controller used is as simple as a PID controller, but required less information. Cell concentration was well controlled by adjusting the inlet flow rate following the algorithm.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.11
• /
• pp.5811-5815
• /
• 2012

Background: Non-invasive oral verrucous carcinoma (OVC) and invasive well-differentiated oral squamous cell carcinoma (OSCC) have similar histopathologic findings but different biological behavior. These two malignancies must be correctly differentiated by pathologists. The aim of this study was to determine immunohistochemical (IHC) expression of Ki67 in OVC and well-differentiated OSCC. Methods: Expression of Ki67 was evaluated by IHC in 15 cases of epithelial hyperplasia with no dysplasia (A group), 15 cases of OVC (B group), 12 cases of microinvasive OSCC(C group) and 15 cases of well-differentiated OSCC (D group). Results: There was a significant difference in Ki67 expression based on pattern distribution of immunostaining positive cells, with quantitative and semi-quantitative analyses, among the four groups ; also, between A group and each of the other three groups (P=0.0001). But there was no significant difference between B and C, C and D, and B and D groups (P>0.05). Conclusions: The three evaluation methods of Ki67 expression showed Ki67 (Mib-1) is not a good immunohistochemical marker to assess invasion status and differentiate OVC from well-differentiated OSCC; also, it cannot be used as a diagnostic tool to distinguish between variants of OSCC with similar grade.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.529-532
• /
• 2005

Expanding cells ex-vivo is very important in tissue-engineering. Culture medium is usually supplemented with fetal bovine serum(FBS) in most of the experiments. However, cells grown in bovine serum media may posses the possibilities of disseminating bovine diseases and/or stimulating the patient's immune reactions. To overcome these problems, autologous or homologous serum should be used instead of the FBS. The purpose of this study is to compare cell proliferation and collagen synthesis depending on the kind of sera mixed on media and to provide a guideline on applying established experimental data to clinical cases. Human dermal fibroblasts were obtained from four patients. Five thousand cells per well in 96-well plates were incubated DMEM/F-12 Nutrient with varying serum mixture; 10% autologous serum, 10% homologous serum, and 10% FBS. Five days after incubation fibroblast proliferation and collagen production were determined by MTT assay and CICP enzyme immunoassay. The mean cell number were; $3.95{\times}10^4/well$, $2.97{\times}10^4/well$ and $2.30{\times}10^4/well$, respectively. The average amounts of collagen synthesized were; 238.13 ng/ml, 204.88 ng/ml, and 163.88 ng/ml in each. These results show that the use of human serum mixture may contribute to, not only preventing disseminated infection of bovine diseases. but also increase cell proliferation and collagen synthesis without simulating the patient's immune reactions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.157-166
• /
• 2017

The Fuel Cell Electric Vehicle(FCEV) is recently evolving into a new trend in the automobile industry due to its relatively higher efficiency and zero greenhouse gas(GHG) emission in the tailpipe, as compared to that of the conventional internal combustion engine vehicles. However, it is important to analyze the whole process of the hydrogen's life cycle(from extraction of feedstock to vehicle operation) in order to evaluate the environmental impact of introducing FCEV upon recognizing that the hydrogen fuel, which is used in the fuel cell stack, is not directly available from nature, but instead, it should be produced from naturally available resources. Among the various hydrogen production methods, ${\sim}54.1%^{8)}$ of marketed hydrogen in Korea is produced from naphtha cracking process in the petrochemical industry. Therefore, in this study, we performed a well-to-wheels(WTW) analysis on the hydrogen fuel cycle for the FCEV application by using the GREET program from the US Argonne National Laboratory with Korean specific data. As a result, the well-to-tank and well-to-wheel GHG emissions of the FCEV are calculated as 45,638-51,472 g $CO_2eq/GJ$ and 65.0-73.4 g $CO_2eq/km$, respectively

• Advances in Traditional Medicine
• /
• v.9 no.2
• /
• pp.192-199
• /
• 2009

Bioactivity-directed isolation has led to the isolation of (-)-ent-costunolide (1) as the major active compound from Hepatostolonophora paucistipula. This compound (1) was determined by spectroscopic data interpretation. This sesquiterpene lactone (1) inhibited the growth of the dermatophytic fungus Trichophyton mentagrophytes ATCC 28185, (4 mm inhibition zone at $15{\mu}g$/disc), cytotoxic activity to murine leukaemia cell lines ATCC CCL 46 P 388D1 ($IC_{50}$ 687 ng/ml, at $0.075{\mu}g$/disk), BSC monkey kidney cell lines (100% of well at $15{\mu}g$/disk) and antiviral activity to Herpes simplex virus (0.25 mg/ml, 100% of well at $7.5{\mu}g$/disk) and Polio virus (0.125 mg/ml, 100% of well at $3.75{\mu}g$/disk). These results suggest that (-)-ent-costunolide (1) has potential antimicrobial and cytotoxic agents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.1
• /
• pp.54-57
• /
• 2005

A soft error rate neutrons is a growing problem fur terrestrial integrated circuits with technology scaling. In the acceleration test with high-density neutron beam, a latch-up prohibits accurate estimations of the soft error rate (SER). This paper presents results of analysis for the latch-up characteristics in the circumstance corresponding to the acceleration SER test for SRAM. Simulation results, using a two-dimensional device simulator, show that the deep p-well structure has better latch-up immunity compared to normal twin and triple well structures. In addition, it is more effective to minimize the distance to ground power compared with controlling a path to the $V_{DD}$ power.