• Anatomy and Cell Biology
• /
• v.55 no.3
• /
• pp.277-283
• /
• 2022

To determine the morphology of the lacrimal sac fossa and bony nasolacrimal duct using computed tomography for obtaining detailed anatomical understanding of the drainage system and utilizing these measurements in planning for dacryocystorhinostomy (DCR) and nasolacrimal duct (NLD) obstruction in normal southwest (SW) population of Iran. One-hundred-sixty-five cases referred for the diagnosis of neuro-ophthalmic conditions were retrospectively studied. Measurements of lacrimal sac fossa were taken on three anatomical sections (upper, middle, and lower planes) utilizing a digital caliper/protractor instrument. Lacrimal thickness and two measurements of maxillary bone thickness were taken at each plane-namely, the "midpoint thickness" and the "maximum thickness." The anterior extent of the nasal mucosa and NLD width was also evaluated. The mean maximum thickness of the maxillary bone at the three anatomical planes of the lacrimal sac fossa was 4.07 mm, 4.78 mm, and 5.60 mm, respectively. The midpoint thickness of the maxillary bone at each plane was 2.38 mm, 1.99 mm, and 1.68 mm, respectively, in both sexs. The lacrimal bone thickness at each level was 0.76 mm, 0.69 mm, and 0.67 mm, respectively. The proportion of the lacrimal sac fossa comprising the lacrimal bone at lower plane was 43.57% and showed a positive correlation with age (P=0.01). The mean anteroposterior bony nasolacrimal diameter was 5.94 mm with no significant difference between patient sex and age. According to the results, its indicate that performing an osteotomy during DCR could be easier in the Iranian SW population compared to other ethnics.

• Anatomy and Cell Biology
• /
• v.55 no.2
• /
• pp.135-141
• /
• 2022

Although adequate venous drainage from the cranium is imperative for maintaining normal intracranial pressure, the bony anatomy surrounding the inferior petrosal sinus and the potential for a compressive canal or tunnel has, to our knowledge, not been previously investigated. One hundred adult human skulls (200 sides) were observed and documented for the presence or absence of an inferior petrosal groove or canal. Measurements were made and a classification developed to help better understand their anatomy and discuss it in future reports. We identified an inferior petrosal sinus groove (IPSG) in the majority of specimens. The IPSG began anteriorly where the apex of the petrous part of the temporal bone articulated with the sphenoid part of the clivus, traveled posteriorly, in a slight medial to lateral course, primarily just medial to the petro-occipital fissure, and ended at the anteromedial aspect of the jugular foramen. When the IPSGs were grouped into five types. In type I specimens, no IPSG was identified (10.0%), in type II specimens, a partial IPSG was identified (6.5%), in type III specimens, a complete IPSG (80.0%) was identified, in type IV specimens, a partial IPS tunnel was identified (2.5%), and in type V specimens, a complete tunnel (1.0%) was identified. An improved knowledge of the bony pathways that the intracranial dural venous sinuses take as they exit the cranium is clinically useful. Radiological interpretation of such bony landmarks might improve patient diagnoses and surgically, such anatomy could decrease patient morbidity during approaches to the posterior cranial fossa.

• Anatomy and Cell Biology
• /
• v.55 no.1
• /
• pp.92-99
• /
• 2022

The liver is the largest gland of the gastrointestinal tract having both exocrine and endocrine functions. Developmentally it arises as a ventral outgrowth from the gut endoderm during 3rd week of intrauterine life. The foetal liver is very important because of its synthetic and hemopoietic potential. The present work aimed to see the detailed histogenesis and development of the foetal liver by cytological, immunohistochemical and ultrastructural study. The liver tissue of nine aborted foetuses of various gestational age were studied. For cytology: special stains like Masson trichrome, periodic acid Schiff and reticulin were used, immunohistochemical staining was performed with triple antibodies (c-myc, Ki-67 and Ber-H2), and for ultrastructure: aluminium mounted specimens were coated with gold and argon gas and observed under scanning electron microscopy (EM). Cytology and immunohistochemistry showed the development of duct patterns and hemopoietic patterns in all stages of fetogenesis. The ductal plate was marked by the layer of dark brown staining cells at the edge of two portal tracts. The haemopoietic cells with sinusoids and aggregation of hepatocytes were observed in the early weeks of gestation. EM showed tree-like branching of a portal canal depicting hepatic segmentation of foetal liver. The organizational changes in lobular pattern, duct pattern, and microstructure of liver during fetogenesis are very crucial to achieve the adult morphology in feature. Histogenesis of the foetal liver follows a multistep process depending upon the gestational age, any deviation from normalcy may lead to structural and functional abnormality later in life.

• Korean Journal of Plant Taxonomy
• /
• v.39 no.1
• /
• pp.12-23
• /
• 2009

To verify hybridity of Asplenium castaneo-viride, external morphology, spore morphology, anatomy and chromosomes of the species and of the two presumed parental species, A. incisum and A. ruprechtii, were examined. A. castaneo-viride usually had 1-pinnately divided frond. However, some individuals had almost simple fronds with pinnatisect basal parts similar to A. ruprechtii, while others had fronds similar to A. incisum in having oblanceolate blades and basal pinnae with triangular, 2-3 lobed apices. On the surface of the spores, sculpturing consisted of folds that were usually prominent; forming long wings, and irregular or incomplete reticulation. However, reticulation patterns varied among species. A. castaneo-viride showed a wide range of variation from sparse to dense patterns, whereas A. incisum showed only from sparse to intermediate patterns. A. ruprechtii showed from intermediate to dense patterns. The spore size of A. castaneo-viride was $54.63{\mu}m$, larger than other two species ($47.81{\mu}m$ in A. incisum and $44.22{\mu}m$ in A. ruprechtii). The level of undulation of epidermal cell wall was also different. A. incisum had the most shallowly undulated wall, and A. castaneo-viride had a pattern intermediate between the two presumed parental species. This same patterns was recognized in the density of stomata. The density of $45.91/mm^2$ in A. castaneo-viride was intermediate between the two presumed parental species ($67.00/mm^2$ in A. incisum, and $37.86/mm^2$ in A. ruprechtii). Chromosome number was constant (2x =2n = 72) as in A. incisum and A. ruprechtii. However, A. castaneo-viride showed a different ploidy level. The populations of Mt. Mai (Jeonbuk province) and Mt. Duryun (Jeonnam province) were diploid (2n = 72) which is a new record for this taxon, whereas the population of Mt. Buram (Seoul) was tetraploid (2n = 144). Conclusively, A. castaneo-viride was revealed to be a hybrid of A. ruprechtii and A. incisum based on evidence involving leaves, spores, epidermal cells, stomata and chromosome number.

• Applied Microscopy
• /
• v.16 no.2
• /
• pp.1-13
• /
• 1986

The purpose of this study was to investigate the morphology and intercellular junctions of the odontoblast of dental pulp in the rat incisor by means of the freeze fracture electron microscopy. Twenty male Sprague-Dawley rats weighing $150{\sim}200g$ were used. After being anesthetized by an intraperitoneal injection of 0.5 ml sodium pentobarbital per kg in body weight(60 mg/ml) the animals were perfused with 2.5% glutaraldehyde-2% paraformaldehyde fixative in 0.1 M cacodylate buffer, pH 7.2 through the ascending aorta for one hour. The incisors were carefully extracted from the jaws and demineralized by suspending them in 0.1 M EDTA in 3% glutaraldehyde (pH 7.2) for two weeks. After demineralization, the specimens were obtained from the portion divided into five equal parts. For freeze-fracture replication, demineralized tissues were infiltrated for several hours with 10%, 25% glycerol in 0.1M cacodylate buffer as a cryoprotectant and then frozen in liquid Freon 22 and stored in liquid nitrogen. Fracturing and replication were done in Balzers BAF 400D high-vacuum freeze-fracture apparatus at $-120^{\circ}C$ under routine $5X10^{-7}$ Torr vacuum. The tissue was immediately replicated with platinum unidirectionally at $45^{\circ}$ angle and reinforced with carbon at $90^{\circ}$ angle unidirectionally or by using a rotary stage. The replication process was monitored by a quartz-crystal device. The replicas were immersed in 100% methanol overnight. The tissue was then digested from the replica by clorox (laundry bleach), placed into 5% EDTA, and washed repeatedly with distilled water. The replicas were picked up on 0.3% formvar-coated 75 mesh grids and examined in the JEOL 100B electron microscope. The results were as follows; 1. Both in thin sections and freeze-fracture replicas, three types of intercellular junctions were recognizable in the plasma membrane of odontoblast: gap junction, tight junction and desmosome-like junction. 2. The nuclear pores were evenly distributed over the nuclear envelope. The pore complex formed a ring about 70 nm in diameter. 3. Gap junctions were found between odontoblasts as well as odontoblasts and neighbouring pulp cells (fibroblast, subodontoblastic cell process, nerve-like fibre). Gap junctions, which were round, ellipsoid and pear-shaped and 600 nm in diameter, were observed in the odontoblast. 4. Numerous round and ellipsoid gap junctions could be frequently seen on the plasma membranes in cell body and apical part of the odontoblasts. On the P face, the junctions were recognized as a cluster of closely packed particles, measuring about 9 nm in diameter, and on the E face, the junctions were recognized as a shallow grooves.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.278-278
• /
• 2009

A photovoltaic device consisting of arrays of radial p-n junction wires enables a decoupling of the requirements for light absorption and carrier extraction into orthogonal spatial directions. Each individual p-n junction wire in the cell is long in the direction of incident light, allowing for effective light absorption, but thin in orthogonal direction, allowing for effective carrier collection. To fabricate radial p-n junction solar cells, p or n-type vertical Si wire cores need to be produced. The majority of Si wires are produced by the vapor-liquid-solid (VLS) method. But contamination of the Si wires by metallic impurities such as Au, which is used for metal catalyst in the VLS technique, results in reduction of conversion efficiency of solar cells. To overcome impurity issue, top-down methods like noble metal catalytic etching is an excellent candidate. We used noble metal catalytic etching methods to make Si wire arrays. The used noble metal is two; Au and Pt. The method is noble metal deposition on photolithographycally defined Si surface by sputtering and then etching in various BOE and $H_2O_2$ solutions. The Si substrates were p-type ($10{\sim}20ohm{\cdot}cm$). The areas that noble metal was not deposited due to photo resist covering were not etched in noble metal catalytic etching. The Si wires of several tens of ${\mu}m$ in height were formed in uncovered areas by photo resist. The side surface of Si wires was very rough. When the distance of Si wires is longer than diameter of that Si nanowires are formed between Si wires. Theses Si nanowires can be removed by immersing the specimen in KOH solution. The optimum noble metal thickness exists for Si wires fabrication. The thicker or the thinner noble metal than the optimum thickness could not show well defined Si wire arrays. The solution composition observed in the highest etching rate was BOE(16.3ml)/$H_2O_2$(0.44M) in Au assisted chemical etching method. The morphology difference was compared between Au and Pt metal assisted chemical etching. The efficiencies of radial p-n junction solar Cells made of the Si wire arrays were also measured.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.8
• /
• pp.1198-1205
• /
• 2017

Objective: An experiment was conducted to isolate and identify new methanogens in Korea from an anaerobic digester that uses pig slurry. Methods: An anaerobic digestate sample was collected from an anaerobic digester using pig slurry. Pre-reduced media were used for the growth and isolation of methanogens. Growth temperature range, pH range, NaCl concentration range, substrate utilization, and antibiotic tolerance were investigated to determine the physiological characteristics of isolated methanogens. The isolates were also examined microscopically for their morphology and Gram-stained. Polymerase chain reaction of 16S rRNA and mcrA gene-based amplicons was used for identification purpose. Results: Four strains, designated KOR-3, -4, -5, and -6, were isolated and were non-motile, irregular coccoid, and 0.5 to $1.5{\mu}m$ in diameter. Moreover, the cell walls of isolated strains were Gram-negative. KOR-3 and KOR-4 strains used acetate for methane production but did not use $H_2+CO_2$, formate, or methanol as a growth substrate KOR-5 and KOR-6 strains utilized acetate, methanol, and trimethylamine for methanogenesis but did not use $H_2+CO_2$ or formate as a growth substrate. The optimum temperature and pH for growth of four strains were $39^{\circ}C$ and 6.8 to 7.2, respectively. The optimum concentration of NaCl for growth of KOR-3, KOR-5, and KOR-6 were 1.0% (w/v). The optimum NaCl concentration for KOR-4 was 0.5% (w/v). All of the strains tolerated ampicillin, penicillin G, kanamycin, streptomycin, and tetracycline; however, chloramphenicol inhibited cell growth. Phylogenetic analysis of 16S rRNA and mcrA genes demonstrated that strains KOR-3, -4, -5, and -6 are related to Methanosarcina mazei (M. mazei, 99% sequence similarity). Conclusion: On the basis of physiological and phylogenetic characteristics, strains KOR-3, -4, -5, and -6 are proposed to be new strains within the genus Methanosarcina, named M. mazei KOR-3, -4, -5, and -6.

• Korean Journal of Environmental Biology
• /
• v.33 no.2
• /
• pp.256-261
• /
• 2015

This study was conducted to assess the influence of hazard pattern in the surface structure of pollen grains of Campsis grandiflora, and cytotoxicity of different part extracts and nectar on RAW264.7 macrophages. The pollen grains were medium sized ($21.8{\mu}m$) with tricolpate aperture type. In equatorial view, the pollens were prolate (P/E=1.8) and the exine pattern was smooth and reticulate. This result contradict with the rumor of having a hook-shaped protuberance that can damage the cornea because we couldn't observed any protuberance on the surface of the outer wall. Furthermore, we investigated the 70% MeOH extracts (flower, leaf, stem) and nectar of C. grandiflora for their cell viability in temporal basis via MTT analysis on RAW264.7 macrophage cells. There was no significant difference in the cytotoxicity among the MeOH extracts and nectar of C. grandiflora after 24 h. However, nectar showed the dosedependent cytotoxicity on RAW264.7 macrophage cells after 48 h.

• Clinical and Experimental Reproductive Medicine
• /
• v.44 no.4
• /
• pp.207-213
• /
• 2017

Objective: This study investigated the prevalence of infections with human papillomavirus, Chlamydia trachomatis, Ureaplasma urealyticum, Mycoplasma hominis, and Mycoplasma genitalium in the semen of Korean infertile couples and their associations with sperm quality. Methods: Semen specimens were collected from 400 men who underwent a fertility evaluation. Infection with above five pathogens was assessed in each specimen. Sperm quality was compared in the pathogen-infected group and the non-infected group. Results: The infection rates of human papillomavirus, C. trachomatis, U. urealyticum, M. hominis, and M. genitalium in the study subjects were 1.57%, 0.79%, 16.80%, 4.46%, and 1.31%, respectively. The rate of morphological normality in the U. urealyticum-infected group was significantly lower than in those not infected with U. urealyticum. In a subgroup analysis of normozoospermic samples, the semen volume and the total sperm count in the pathogen-infected group were significantly lower than in the non-infected group. Conclusion: Our results suggest that infection with U. urealyticum alone and any of the five sexually transmitted infections are likely to affect sperm morphology and semen volume, respectively.

• The korean journal of orthodontics
• /
• v.33 no.6 s.101
• /
• pp.453-463
• /
• 2003

Mammalian cell is critically dependent on a continuous supply of oxygen. Even brief periods of oxygen deprivation can result in profound cellular damage. The aim of this study was to examine the possible mechanism of apoptosis in response to hypoxia in MC3T3E1 osteoblasts. MC3T3El osteoblasts under hypoxic conditions ($2\%$ oxygen) resulted in apoptosis in a time-dependent manner, determined by DNA fragmentation assay and nuclear morphology, stained with fluorescent dye (Hoechst 33258) Pretreatment with Z-VAD-FMK, a pancaspase inhibitor, or Z-DEVD-CHO, a specific caspase-3 inhibitor, suppressed the DNA ladder in response to hypoxia in a concentration dependent manner. An increase in caspase-3-like protease (DEVDase) activity was observed during apoptosis, but no caspase-l activity (YVADase) was detected. To confirm what caspases were involved in apoptosis, western blot analysis was performed using an anticaspase-3 or 6 antibody. The 17-kDa protein, that corresponds to the active products of caspase-3 and the 20-kDa protein of the active protein of caspase-6 were generated in hypoxia-challenged lysates, in which the full length forms of caspase-3 and 6 were evident. With a time course similar to caspase-3 and 6 activation, hypoxic stress also caused the cleavage of Lamin A, typical of caspase-6 activity. In addition, the hypoxic stress elicited the release of cytochrome c into the cytosol during apoptosis. These findings suggested that the activation of caspases accompanied by a cytochrome c release in response to hypoxia was involved in apoptotic cell death in MC3T3E1 osteoblasts.