• 전기학회논문지P
• /
• 제58권4호
• /
• pp.557-562
• /
• 2009

Recently, researchers are developing a new, clean, renewable and sustainable energy to the industrial areas and the residential areas. Solar cell and fuel cell energy are presented in this paper. The paper shows the P-I and I-V characteristics of fuel cells which are connected in parallel and series. And the voltage drop of internal resistance of the fuel cell decreases with the increasing of the current of the fuel cell. A voltage drop at the internal resistance is increased according to the current, thus the terminal voltage is decreased. The internal resistance is calculated $0.3[\Omega]$ from maximum power transfer condition.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.209-213
• /
• 2009

This article interprets the operating characteristics of the photovoltaic system during the winter and spring seasons, and based on the theoretical knowledge, analyzes the operational characteristics and the power electricity during the tentative application and operation of this system. Through the long-term measurement of the sunshine time and collection of the data related to this, we examine the study of graphic presentation and monitoring systems.

• 한국유체기계학회 논문집
• /
• 제15권1호
• /
• pp.52-57
• /
• 2012

Stall inception characteristics are researched to understand stall well. To realize different stall inception patterns, IGV stagger angle was changed. At design IGV stagger angle, spike, which is short length scale, is observed. Decreasing IGV stagger angle, spike changes to mode, which is long length scale, and further decreasing get multi cell. Compressor maps for each IGV stagger are shown to compare different stall inceptions. The characteristics of both spike and mode are confirmed in this experiment. Furthermore, transient from spike to mode is find. multi cell has 4cells and is little bit faster than mode. and multi cell shows 2nd, 3rd characteristics on compressor map.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.515-518
• /
• 2000

We studied the viewing angle characteristics of a negative dielectric anisotropy nematic liquid crystal (NLC) using the new vertical-alignment (VA)-1/6 cell on a rubbed polyimide (PI) surface. Good voltage-transmittance (V-T)characteristics using the new VA-1/6 cell without a negative compensation film were obtained. The iso-viewing angle characteristics using the new VA-1/6 cell without the negative compensation film can be achieved.

• 대한세포병리학회지
• /
• 제12권1호
• /
• pp.31-37
• /
• 2001

Whlie cytologic characteristics of squamous dysplasia, carcinoma in situ, and invasive squamous cell carcinoma of the uterine cervix are well documented, relatively few studios have dealt with the cellular features of microinvasive carcinoma. In order to describe the cellular characteristics of microinvasive squamous cell carcinoma, we retrospectively reviewed 45 cervovaginal smears(15 carcinoma in situ, 15 microinvasive cancer, 15 invasive cancer) which were confirmed by histologic examination of specimens obtained by hysterectomy at the Seoul National University Hospital during S years from 1995 to 1999. The cytologic features about tumor diathesis, inflammatory background, ceil arrangement, anisonucleosis, nuclear membrane irregularity, nuclear chromatin pattern, and nucleoli were observed. The cytologlc characteristics of microinvasive squamous cell carcinoma of the uterine cervix are syncytial pattern, mild tumor diathesis, the irregularity of nuclear membrane, irregularly distributed nuclear chromatin, and occurrence of micronucleoli. But, correlation between the depth of Invasion and the cytologic feature had limited value.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.9-10
• /
• 2000

The wide viewing angle and fast response time characteristics of negative dielectric anisotropy nematic liquid crystal (NLC) using a novel vertical-alignment (VA) - 1/4 ${\pi}$ cell mode on a homeotropic alignment layer were investigated. Good voltage-transmittance curves and low driving voltage using the novel VA - 1/4 ${\pi}$ cell mode without a negative compensation film were obtained. The iso-viewing angle characteristics of NLC using the novel VA - 1/4 ${\pi}$ cell mode without a negative compensation film can be achieved. The fast response time of 24.4 ms in NLC was successfully measured. The iso-viewing angle, fast response time, and low driving voltage characteristics using the novel VA - 1/4 ${\pi}$ cell mode can be achieved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.73-77
• /
• 1991

200hrs operational characteristics of the single cell in phosphoric acid fuel cell was studied. The initial performance of single cells was examined as a function of PTFE content of electrode in the range of 30 to 60 wt.%. The cell with the electrode of 40wt.% PTFE was chosen for the 200hrs operation. The cell voltage decay was found to be about 0.5mV/hr for 200hrs operation. These results of cell performance were discussed as related to the internal resistance and the exchange current density of the cell.

• Transactions on Electrical and Electronic Materials
• /
• 제4권4호
• /
• pp.7-9
• /
• 2003

Viewing angle characteristics of a nematic liquid crystal (NLC) using a in-plane driven (IPD) vertical alignment (VA) cell without a negative compensation film on a homeotropic alignment layer were studied. Good voltage-transmittance (V - T) curves were obtained using the rubbing aligned IPD- VA cell. However, instability and low transmittances of V - T characteristics in photo aligned IPD- VA cell was measured. The EO performance of a rubbingaligned IPD- VA cell without a negative compensation film was wider than that of photoaligned IPD- VA cell and conventional VA cell. Also, the fabrication processes using the rubbing aligned IPD- VA cell mode be carried out with only one-sided rubbing.

• 한국전기전자재료학회논문지
• /
• 제17권9호
• /
• pp.983-987
• /
• 2004

We have studied electro-optic characteristics of reflective optically compensated splay (R-OCS) cell. The initial configuration of this cell is in splay form such that a mid director lies parallel to the substrate and around it hybrid structure is formed symmetrically so the optically compensation effect exists. Optimized optical configurations could be achieved by using a single polarizer, a quarter-wave film and a cell with quarter-wane retardation. The optimal cell retardation is 0.34 ${\mu}$m, allowing to have large cell gap. The cell provides high contrast ratio of 80:1 at normal direction and the region with contrast ratio over 5:1 covert up to 160$^{\circ}$ horizontally and vertically at all wavelength range.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권3호
• /
• pp.200-205
• /
• 1994

The FEM technique was applied to simulate the change of stress characteristics for various structural parameters and loading positions of the load cell. The output voltage of the load cell was then computed to compare with the manufactured load cell. The tendency of the stress variations of the load cell was well agreed with the basic formula of the single fixed. beam. Also, the stress characteristics according to the change of loading positions showed respective featured results as different structure. The calculated output voltages of the load cell were very close to those of the real manufactured ones.