• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제22권4호
• /
• pp.855-869
• /
• 1997

In this paper, we proposed two kids of dynamic priority control mechanisms controlling the cell service ratio in order to improve the QOS(Quality of Service). We also analyse theoretically the characteristics of cell loss probability and mean cell delay time by applying the proposed priority control mechanisms to ATM switch with output buffer. The proposed priority control mechanisms have the same principles of storing cells into buffer but the different principles of serving cells from buffer. The one is the control mechanism controlling the cell service ratio according to the relative cell occupancy ratio of buffer, the other is the control mechanism controlling the cell service ratio according to both the relative cell occupancy ratio of buffer and the average arrival rate. The two service classes of our concern are the delay sensitive class and the loss sensitive class. The analytical results show that the proposed control mechanisms are able to improve the QOS, the characteristics of cell loss probability and mean cell delay time, by selecting properly the relative cell occupancy ratio of buffer and the average arrival rate. conventional DLB algorithm does not support synchronous cells, but the proposed algorithm gives higher priority to synchronous cells. To reduce synchronous cell loss rate, the synchronous cell detector is used in the proposed algorithm. Synchronous cell detector detects synchronous cells, and passes them cells to the 2nd Leaky-Bucket. So it is similar to give higher priority to synchronous cells. In this paper, the proposed algorithm used audio/video traffic modeled by On/Off and Two-state MMPP, and simulated by SLAM II package. As simulation results, the proposed algorithm gets lower synchronous cell loss rate than the conventional DLB algorithms. The improved DLB algorithm for multimedia synchronization can be extended to any other cells which require higher priority.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권2호
• /
• pp.69-75
• /
• 2003

Cell transistor and data retention time characteristics were studied in 90 nm design rule 512M-bit DRAM, for the first time. And, the characteristics of cell transistor are investigated for different STI gap-fill materials. HDP oxide with high compressive stress increases the threshold voltage of cell transistor, whereas the P-SOG oxide with small stress decreases the threshold voltage of cell transistor. Stress between silicon and gap-fill oxide material is found to be the major cause of the shift of the cell transistor threshold voltage. If high stress material is used for STI gap fill, channel-doping concentration can be reduced, so that cell junction leakage current is decreased and data retention time is increased.

• Korean Journal of Optics and Photonics
• /
• 제13권6호
• /
• pp.548-553
• /
• 2002

We have investigated the output characteristics of a Nd:YAG oscillator with a Stimulated Brillouin Scattering phase conjugation mirror (SBS-PCM). FC-75 is used as an SBS gain medium and Cr:YAG (T=50%) as a Q-switcher. The SBS-PCM consists of an SBS-cell and a simple plano-convex focusing lens system. For the case of not using a Q-switcher, an SBS-cell doesn't work as a phase conjugation mirror. For the case of using a Q-switcher, the energy characteristics remains nearly the same whether using the SBS-cell or not using it. The pulse width is reduced from 50 ns to 40 ns by an SBS-PCM. When the SBS-cell is used with a Q- switcher, the SBS-cell works very well as a phase conjugation mirror and its beam-profile is improved dramatically. And in order to explain the progression of beam-profile, we propose a simple model based on the nonlinear reflectivity of the SBS-PCM, whose reflectivity is dependent on the pumping intensity at the focal plane.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1999년도 제3회 총회 및 추계학술발표회
• /
• pp.70-70
• /
• 1999

• The Transactions of the Korea Information Processing Society
• /
• 제2권5호
• /
• pp.667-676
• /
• 1995

In ATM traffic multiplexing, the cell clumping and the cell dispersion are occured due to the cell delay variance(CDV) which changes the traffic characteristics. These cell variances increase the burstiness of t.he cell streams and make the network congested. The function of the traffic shaping is necessary to transmit the input streams into the networks or into the traffic policing schemes with some intevals. Most of the existing studies regard the input traffics as the traffic with the identical characteristics. In this study, the traffic shaping is processed by considering the traffic characteristICS with t.he loss-sensitive traffic and the delay-sensitive traffic. The traffic shaping model and the traffic shaping algorithm which considers the" characteristics of input streams have been presented. The traffic effect On t.he CDV size is also studied. The proposed scheme is compared to Virtual Scheduling Algorithm(VSA) and the efficiency of the proposed scheme is evaluated. According to the simulation results, t.he mean delay is decreased about 12% in delay-sensitive traffic and the traffic burstiness is decreased about 11 % in loss-sensitive traffic.

• Magazine of the Korean Society of Agricultural Engineers
• /
• 제44권6호
• /
• pp.61-70
• /
• 2002

This study was performed to analyze the river fractal characteristics using GIS (Geographic Information System). In this study, topographical factors in river basin were grid-analyzed for each cell size and scale using GIS and regression formula was derived by analyzing correlation among topographical factors and cell size which were calculated here. And, a new rainfall-runoff model which is considering the calculated fractal dimension was developed to apply fur a river basin.

• The Korean Journal of Malacology
• /
• 제27권2호
• /
• pp.121-129
• /
• 2011

The ultrastructural characteristics of germ cell development during spermatogenesis and mature sperm morphology of in male Scapharca subcrenata were investigated by transmission electron microscope observation. Spermatogonia are located nearest the outer wall of the acinus, while spermatocytes and spermatids are positioned near the accessory cells. The accessory cells, which is in close contact with developing germ cells, contained a large quantity of glycogen particles and lipid droplets in the cytoplasm. Therefore, it is assumed that they are involved in supplying of the nutrients for germ cell development. The morphologies of the sperm nucleus and the acrosome of this species are the oval shape and cone shape, respectively. Spermatozoa are approximately 45-$50{\mu}m$ in length including a sperm nucleus (about $1.30{\mu}m$ in length), an acrosome (about $0.59{\mu}m$ in length), and tail flagellum (about 43-$47{\mu}m$). The axoneme of the sperm tail shows a 9 + 2 structure. As some characteristics of the acrosomal vesicle structures, the right and left basal rings show electron opaque part (region), and also the anterior apex part of the acrosomal vesicle shows electron opaque part (region). These characteristics of the acrosomal vesicle were found in Acinidae and other several families in subclass Pteriomorphia. These common characteristics of the acrosomal vesicle in subclass Pteriomorphia can be used for phylogenetic and taxonomic analysis as a taxonomic key or a significant tool. The number of mitochondria in the midpiece of the sperm of this species are five, as one of common characteristics appear in most species in Arcidae and other families in subclass Pteriomorphia. The acrosomal vesicles of Arcidae species do not contain the axial rod and several transverse bands in acrosome, unlkely as seen in Ostreidae species in subclass Pteriomorphia, These characteristics can be used for the taxonomic analysis of the family or superfamily levels as a systematic key or tools.

• Journal of Microbiology and Biotechnology
• /
• 제6권2호
• /
• pp.132-136
• /
• 1996

To investigate the characteristics of immobilized peppermint (Mentha piperita) cells, dry cell weight (DCW), change of cell viability, and oil productivity of the immobilized cells were determined. Peppermint cells were immobilized in polyurethane (PU) foams of $5{\times}5{\times}5$ mm and cultured in a shaking flask. The maximum DCW was 2.1 mg per foam piece after 20 days of cultivation and the cell density was approximately 420 mg per flask containing 200 foams in 200 ml medium. For the first five days of cultivation, the cell viability was about 80$%$ and decreased to 70$%$ during 5 to 20 days of cultivation. The maximum oil productivity, 148 mg/l was achieved after 40 days of cultivation. The immobilized cells were also cultivated in a bioreactor, equipped with a round spiral type impeller, containing 2, 400 PU foams. The cell viability after 30 days of cultivation with chitosan as an elicitor in the bioreactor was 67$%$ and DCW was 2.0 mg per foam piece. Though the cell viability was relatively high in the bioreactor system, the oil productivity was relatively lower than that of the flask system.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• 제9권3호
• /
• pp.106-109
• /
• 2004

In-situ observational works had been done for the investigation of Cochlodinium polykrikoides cell distributions and abundances off the coast of Busan, Jinhae Bay, and Namhae to Tongyong area in the early June, 2004. The surface water of 11 was concentrated by passing through ${\Phi}$ 10 $\mu\textrm{m}$ mesh and cellular morphological characteristics of the species in the sample was observed under light microscope equipped with digital camera on the vessel. C. polykrikoides cells showed highest cell numbers ranging from 60 to 660 cells/1 at Jinhae Bay. Cell counts at offshore area of Busan ranged from 45 to 330 cells/1. However, no cell was found in the water between Namhae and Tongyong. C. polykrikoides found during the cruise had a large bright red and round cellular materials in one cell and two-celled chain of C. polykrikoides. The red material decreased as C. polykrikoides formed long chains through cell divisions.

• Journal of Biomedical Engineering Research
• /
• 제31권2호
• /
• pp.87-93
• /
• 2010

Researches for stem cells have been focused on scientists in biomedical sciences as well as clinical application for its great therapeutic potentials. Stem cells have two distinct characteristics: self-renewal and differentiation. In this short review, the links between stem cell research and biomedical engineering is discussed based on the basic characteristics of stem cells. This concept can be extended to the fundamental questions of biological sciences for cells such as proliferation, apoptosis, differentiation, and migration. For understanding proliferation and apoptosis of stem cells, techniques from biomedical engineering such as surface patterning, MEMS, nanotechnologies have been used. The advanced technologies such as microfluidic technologies, three dimensional scaffold fabrication, and mechanical/electrical stimulation have also been used in cell differentiation and migration. Basic and unsolved questions in the stem cell research field have limitations by studying conventional technologies. Therefore, the strategic fusion between stem cell biology and novel biomedical engineering field will break the barriers for understanding fundamental questions of stem cells, which can open the window for the clinical applications of stem cell based therapeutics as well as regeneration of damaged tissues.