• Textile Coloration and Finishing
• /
• v.14 no.5
• /
• pp.294-301
• /
• 2002

The effects of various parameters on partial decoloration of cotton dyeings using discharge reactive dye were investigated. The decoloration of dyed cotton fabrics with varying pH were very sensitive below 100g/1 of amount of potassium carbonate. Our results did indicate any significant changes in color when the amount of Rongalite C in reducing liquor was increased 10g/l to 200g/l. The steaming time had significant effects on fade-out, with an steaming time of 3~5 min. being sufficient for deceleration build up. The change of color below $130^\circ{C}$ was not significant and it only become evident above $140^\circ{C}$. The additional color changes did not cause by washing under suitable concentrations of oxidation and neutralization agents. The decoloration treatment did not affect the mechanical property of cotton fabrics such as tensile strength.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.847-850
• /
• 2008

Three thermally stable red dyes of azo, quinacridone and perylene derivatives were synthesized and dye-based color filters were manufactured for liquid crystal display. Aggregation behavior of the dyes and their spectral property in film state were investigated by concentration dependent spectroscopy and field emission scanning electron microscopy (FE-SEM). These dyes have remarkable difference on their aggregation behavior in film state. Such difference of aggregation behavior affects the spectral property of the film, and it can cause decreasing the transmittance of dye-based color filters.

• Textile Coloration and Finishing
• /
• v.16 no.2
• /
• pp.41-46
• /
• 2004

We have studied on the experimental variables such as optimum adsorption condition, color changes, light fastness, antimicrobial properties, and wash durability of the cotton fabrics treated with gallnut extracts. Treatment of gallnut extracts on the cotton fabrics was optimally achieved at 6$0^{\circ}C$ for 60min. Gallnut extracts did not cause unintended color change after treatment on the cotton fabrics dyed with reactive dyes. The cotton fabrics treated with gallnut extracts showed good light fastness, though we took into the account the extract is a natural material. The cotton fabrics treated with 10.0% o.w.f. of gallnut extracts had strong antimicrobial activity and good wash durability.

• The Research Journal of the Costume Culture
• /
• v.13 no.2 s.55
• /
• pp.289-299
• /
• 2005

Through the formative analysis of the traditional jokakbo, we have composed surface composition that was made by a perfect square, triangle, a weather vane type, vertical type, cintamani type, and a mixed rectangular. And we have composed 18 kinds of motif stimulants that was made by vivid tone, pale tone, and so on, and finally analyzed sensibility image, preference rate of them. The cause of composition for the sensibility image of stimulant was composed by the cause of simplicity characteristics, interesting characteristics, rigid-flexibility characteristics, and modern characteristics. And from these things, the cause of simplicity characteristics and the cause of interesting characteristics were revealed as important dimensional factors of sensibility image. The sensibility image of motif was revealed as a simple image of perfect square, a feminine image of cintamani type, a modern image of mixed rectangular. And black-white colored mixed rectangular and chromatic colored cintamani type were also revealed as an interesting image. The preference rate of motif is related with the cause of interesting characteristics and simplicity characteristics, it also has been revealed to prefer the pale tone than others. And it also has been revealed that achromatic colored mixed rectangular, cintamani type of vivid tone, perfect square and rectangular of pale tone were mostly preferred.

• Resources Recycling
• /
• v.19 no.6
• /
• pp.86-92
• /
• 2010

In the many kind of construct-material, the concrete which has the high-strength and a durability is sufficient to use with structure-material. but the color of concrete is very monotony, so generally concrete isn't used the out surface. although color concrete is a method of expressing surface, the combination of pigment and cement cause many physical problem such as efflorescence phenomenon, strength degradation and so on. In this study, It attempt to develop the black mortar using the industrial granulated blast furnace slag and to evaluate basic physical properties compare with general color concrete to solve the color concrete problem. The result of experiment showed that the flow dropped mixing of pigment. but flow increased in proportion to the mixing rate in occasion of mortar that mix granulated blast furnace sla and black mortar which was made granulated blast furnace slag has more visible black color than any mortar.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.492-495
• /
• 2010

Purpose: Facial tumor excision is a common cause of lower eyelid defect in old patients. Many methods have been introduced for the reconstruction of lower eyelid. However, conventional surgical method can cause various complications like scar, ectropion and unnatural color matching. Thus, we introduce a simple and aesthetically acceptable method for the reconstruction of lower eyelid defect. Methods: Three elderly patients with skin cancer in the unilateral lower eyelid were operated by the new method. Following a wide excision of skin cancer, subcilliary incision of lower blepharoplasty was carried out. Elevated skin flap of lower eyelid was redrapped for the correction of defect and the remnant skin from lateral portion of lower eyelid was used for full thickness skin graft (FTSG) to correct the remaining defect. Results: All grafts survived and color match of the graft was excellent without ectropion. Furthermore, wrinkles of the lower eyelid were improved after the blepharoplasty. Conclusion: Lower eyelid defect resulting from wide excision of malignant tumor in old patients could be reconstructed successfully by modifying the conventional lower eyelid blepharoplasty along with FTSG using the remnant skin.

• Applied Microscopy
• /
• v.52
• /
• pp.3.1-3.8
• /
• 2022

Our purpose in this study is to analyze the microstructural characteristics and constituent elements of inorganic substances added to the yellow ink and red ink pigments used in permanent makeup. We observed the microstructural properties of inorganic pigments added to the ink using a scanning electron microscopy (SEM) and analyzed the constituent elements of the inorganic pigment particles using an energy dispersive X-ray spectroscopy (EDX). In red wine-colored ink, cubic titanium dioxide with a diameter of 110 to 200 nm was the major component, and rod-shaped iron oxide was rarely observed. Most of the ingredients of taupe yellow ink were rod-shaped yellow iron oxide, and a small amount of cubic titanium dioxide was observed. Red wine-colored ink and taupe yellow ink contained lumps composed of titanium dioxide particles. In red wine-colored ink, lumps were formed by agglomeration. However, we observed that the surface of the lump composed of titanium dioxide in the taupe yellow ink had a smooth surface caused by external physical compression. The titanium dioxide particle mass which found in taupe yellow ink in this study is an artificial product. When this mass accumulates in the dermis, it may cause a color mismatch. Therefore, permanent makeup using fine pigments should be free of foreign substances that may cause trouble in the skin. In addition, there is a need to improve the quality of the ink so that the required color can be safe and long lasting in the dermis.

• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.183-186
• /
• 1992

Jindo Hongju is a traditional liquor in Korea. The characteristic of Hongju are its unique flavour and red color which is extracted from the root of gromwell (Lithospermum erythrorhizon). It is due to these color and flavour that Hongju attracts visual charm. However, the commercial value of Hongju is reduced because of the discoloration of red pigment during storage. Therefore, factors which cause the discoloration of red pigment and methods to prevent discoloration were investigated. The results obtained from this study are summarized as follows. The factors that cause the discoloration were visible light, temperature (beyond $40^{\circ}C$), pH (above 10) and inorganic ion ($Cu^{2-}$). Among all the additives added, Cystein (100 ppm) was the most effective inhibitor of pigment discoloration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.2
• /
• pp.172-183
• /
• 2002

This study is going to compare the degree of color change which occurs in the following two cases of the factors which cause the color change of extra-staining, one is during glazing by the dental technician, the other is tooth brush abrasion which makes the biggest influence on color change. To compare the degree of color change before and after glazing, a sample was made with vintage incisal porcelain No. 59 OPAL(Shofu Inc, Japan), after that it was painted with three colors of porcelain stainers, then the degree of color was measured with a spectrophometer(Model Chromaview 300, Spectoron Tech Co. Korea) after it had been treated with firing only and glazing after firing 40,000-cycle and 80,000-cycle of tooth brush abrasion test were carried out in order to simulate the brushing effect of 4 years and 8 years by using the abrasion tester. The colors were measured before the test, and after the 40,000-cycle and 80.000-cycle operations and the surfaces were examined by SEM. The results of this study were as follows ; 1. The color change before and after glazing was not great enough to have a clinical significance but the orange color was changed more significantly statistically than the blue and light brown(p<0.05). 2. In the case of the color change of stained porcelain by tooth brushing, carrying out staining and glazing with two-times firings resulted in statically less color change than one firing only(p<0.05). 3. In the case of the difference in the stainer's color, the orange color which has higher chroma was statically more sensitive than the blue color(p<0.05) 4. In the case of the color change after the 80,000-cycle abrasion, all showed color change when there was one firing and the orange stainer showed some color change with clinical significance when firings were done two times.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.27 no.1
• /
• pp.29-47
• /
• 2009

Generally, if RGB image is sent to the printer when we print a digital photograph, the printer will convert RGB to CMYK by the inner built-in drive. Because the difference between color domain of RGB and CMYK will cause that change and difference. The most common way to solve the problem is to convert colors by using ICC profile at RIP software or to adapt automatic color converting from the software of the original printer. So we intended to study show which way is most efficient to the digital output and which color mode device is the best based on the printer's own drive in this paper. we tried to observe and check the extended range of color space such as AdobeRGB as well as CMYK and sRGB. Then we made sure which is the suitable color space. Besides, When we convert RGB mode into CMYK mode by utilizing RIP software and adapt the printer's ICC profile made by our selves, we evaluated the output we get and compared the result with extended RGB image. The results are as follows. In case of RGB mode, the printer requests RGB, and that makes the color space more efficient than CMYK's. Converted to CMYK by utilizing RIP software, the chroma is more linearized than the one produced with its' own driver. Compared with sRGB mode's color gamut, AdobeRGB mode's color gamut and CMYK mode's color, CMYK mode's color gamut is the smallest among 3 of them. CMYK mode's color gamut by utilizing RIP software can be changeable. that can be small and narrow or wide and broad. In other words, the volume of color gamut depends on how CMYK is linearized. The color space of sRGB is more advantageous than the one of AdobeRGB in color-reproduction printed. But in the group $-b^*$, the chroma leaves behind in terms of reproduction, In the group of $-a^*$, the chroma is excellent relatively. Visual evaluation of the image, AdobeRGB image has not many reproduction colors. Specially, according to printers' characteristics, Group B of AdobeRGB and sRGB color space is a long way behind In terms of reproduction but Group Y is excellent relatively.