• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.65-76
• /
• 1996

A screw propeller is usually accepted as a propulsor of many kinds of ships. However, for high speed vessels, screw propeller has large cavitation area on the blades so propeller efficiency is decreased and erosion can be happened. To avoid this problem, supercavitating propeller and waterjet are generally used for high speed vessels. In this paper, we introduced the self-propulsion test procedure which has been developed for high speed vessels in Hyundai Maritime Research Institute. The model ship used in experiment represents catamaran about 5.3 m in length. To minimize the experimental errors, two impellers were driven by a single motor. Thrust was calculated by converting the measured pressure to flow rates at the nozzle exit. The test procedure is composed of resistance test, self propulsion test and analysis. In order to measure the pressure, pressure tabs were installed around the nozzle exit and connected to the pressure sensor by vinyl tube.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.4
• /
• pp.42-53
• /
• 2002

This paper is for the hull form development of high-speed passenger ship in the Yellow Sea. To carry out hull form development in Yellow Sea, a catamaran which is designed for high-speed as well as comfortable passenger vessel up to now is selected and investigated. For this, environments of the Yellow Sea such as tide, water depth and so on are considered as important factor. The economical efficiency of the designed ship is considered too. In order to estimate the resistance characteristics of the designed hull form, numerical simulations and model test are performed.

• 한국기계연구소 소보
• /
• s.17
• /
• pp.157-165
• /
• 1987

The SWATH concept hull form which is capable of high speed navigation with small oscillatory motions in waves, was developed from the catamaran type hull forms. This paper describes how the motion of a SWATH ship in irregular waves can be reduced by regulating the stabilizing fins. The optimal regulator and LQG (Linear Quadratic Gaussian) controller for vertical plane motion have been applied for both platforming mode and contouring mode controls. The calculations of hydrodynamic coefficients and external forces are possible for defining the system equation for the design purpose of motion control. Performances of the controlled system are compared with those of original system.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.4 s.35
• /
• pp.132-142
• /
• 1999

A three-dimensional linearised potential theory is presented for the prediction of motions and dynamic structural responses of twin-hull ships travelling with forward speed in regular waves. Comparisons between theoretical and experimental results are shown for the motion responses and lateral wave loads of an ASR(anti-submarine rescue) catamaran. In general, good agreement between theory and experiment is found except for some discrepancies that are believed to be caused by neglect of forward speed effects on free surface.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.55-60
• /
• 2006

최근 우리나라는 일반인들의 레저에 대한 관심이 고조되고 있고, 선진국형 해양레저에 대한 관심과 수요가 크게 증가하고 있는 실정이다. 특히, 해양레저의 꽃이라 할 수 있는 세일링요트 및 관련 장비 경우에는 대부분 전량 수입에 의존하고 있어 국산화 개발이 시급히 요구되고 있는 실정이다. 따라서 세일링요트 중에서 넓은 갑판면적 및 안정된 운항성능을 가지는 카타마란형 세일링요트의 선형설계와 형상에 따른 성능/특성 검증 위한 선형시험 등을 수행하여 국내에 적합한 카타마란형 세일링요트의 기초 자료를 정립하여 중소형조선소의 레저선박 관련 기술경쟁력 확보와 해양레저 활성화에 도움을 주고자 한다.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3B
• /
• pp.116-126
• /
• 1999

The purpose of this study is to analyze the economic aspect of sea transportation system between Inchon and Youngjong island in which Inchon international airport is being constructed. Total demand of sea transportation arising from in the airport and Yongyu Muwi leisure complex was estimated. To select optimum transportation route, environmental conditions in and around Inchon harbour and Youngjong island including the change of water depth by tide current, fog, rain, wind adn typhoon, ets., were investigated. The preliminary consideration on ships (size, velocity, transport capacity, price), routes, operational modes, terminals and berthing facilities were carried out. The transportation cost per passenger by sea transportation system was estimated to compare with that of land transportation system. It was found that sea transportation system proposed is competitive to the transportation system.

• Journal of computational fluids engineering
• /
• v.1 no.1
• /
• pp.55-63
• /
• 1996

Numerical computations are carried out to analyze the characteristics of flow fields around Air Supported Ships. The computations are performed in a rectangular grid system based on MAC(Marker And Cell) method. The governing equations are represented in finite difference forms by forward differencing in time and centered differencing in space except for its convection terms. For the certification of this numerical analysis method, the computations of flow fields around a Catamaran, an ACV(Air Cushion Vehicle) modeled with pressure distribution on free surface and two SES(Surface Effect Ship)'s are carried out, The results of the present computations are compared with the previously presented computational and experimental results in the same condition.

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.43-48
• /
• 1995

A numerical computation is carried out to analyse characteristics of flow fields around Air Supported Ships having arbitrary form. The computations are performed in a rectangular grid system with MAC(Marker And Cell) method. The governing equations are represented in a Finite Difference form by forward differencing in time and centered differencing in space except for convection terms. For validation of this numerical analysis method, the computation of flow fields around Catamaran and ACV(Air Cushion Vehicle) with pressure distribution on free surface are done, and that around Surface Effect Ship is also carried out. The results of the computations are compared with the those of existed numerical computation and experimental results with the same condition.

• Journal of the KSME
• /
• v.32 no.9
• /
• pp.777-787
• /
• 1992

21세기를 향한 여객선의 추세는 초고속화, 대형화(국제화), 성에너지화, 우수한 내항성능, 저진동 및 저소음 등을 갖춘 선박을 요구하고 있다. 이런 관점에서 초고속선으로 속력에 한계가 있는 단동선 (monohull), 쌍동배수량형(catamaran), 최소수면 쌍동선(SWATH)의 선형과 대형화가 곤란한 수중익선 (hydrofoil)보다는 속력면에서 유리하고 대형화가 가능한 표면 효과선 또는 앞 에서 언급한 고속 선형의 장점을 복합시킨 각종 복합선형이 개발되리라고 생각한다. 그러나 복 합선형이 실용화되기까지는 경제적인 건조비, 운항자세 제어 시스템, 신소재를 이용한 경구조화, 진동과 소음, 추진 시스템 등에 대한 요소 기술의 개발이 선행되어야 한다. 끝으로 선박의 속력이 50노트가 넘는 초고속선을 설계, 제작, 운항을 하는데 있어 그 개념이 조선공학에서 다루어지는 통상 선박기술의 연장이라고 그 영역을 정리하는 경향이 있다. 이 글을 정리하면서 느낀 것이 지만 해상교통 수단의 초고속화가 이루어질수록 그 지지기술 및 자세제어기술 등에 있어서는 항공기 기술에 가까워짐을 알게 되었다. 그러한 뜻에서 초고속선 개발에는 항공기 기술에서 얻 어진 노하우를 잘 활용하는 일도 중요하리라 생각된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.797-803
• /
• 2000

Recently, the singing phenomenon was encountered during the sea trials of high speed catamaran and 46,000 TDW product carrier and remedied after various treatments, which were based on the reduction of vortex shedding strength and the avoidance of resonance, respectively. And, the numerical approach for structure-acoustical problem like singing phenomenon was established using MSC/NASTRAN and SYSNOISE. In this paper, the effectiveness of numerical approach was verified through the control of singing noise. And the results according to the modification were also discussed. Finally, the future works were described to enhance the numerical approach pattern for singing phenomenon.