• Bulletin of the Korean Chemical Society
• /
• v.19 no.7
• /
• pp.754-760
• /
• 1998

It was found that the adsorption of a cobalt(III) complex with a macrocyclic ligand, C-meso-5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane (hmc), was induced on a glassy carbon electrode by heavily oxidizing the electrode surface. Adsorption properties are discussed. The glassy carbon electrode with the adsorbed complex was employed to see the catalytic activities for the electro-reduction of O2. In the presence of oxygen, reduction of (hmc)Co3+ showed two cathodic waves in cyclic voltammetry. Compared to the edge plane graphite electrode at which two cathodic waves were also observed in a previous study, catalytic reduction of O2 occurred in the potential region of the first wave while it happened in the second wave region with the other electrode. A rotating disk electrode after the same treatment was employed to study the mechanism of the O2 reduction and two-electron reduction of O2 was observed. The difference from the previous results was explained by the different reactivity of the (hmc)CoOOH2+ intermediate, which is produced after the two electron reduction of (hmc)Co3+ in the presence of O2.

• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.346-351
• /
• 2024

Chemical reduction using catalysts and NaBH₄ presents a promising approach for reducing 4-nitrophenol contamination while generating valuable byproducts. Covalent organic frameworks (COFs) emerge as a versatile platform for supporting catalysts due to their unique properties, such as high surface area and tunable pore structures. This study employs design of experiments (DOE) to systematically optimize the synthesis of Cu embedded COF (Cu/COF) catalysts for the reduction of 4-nitrophenol. Through a series of experimental designs, including definitive screening, mixture method, and central composition design, the main synthesis parameters influencing Cu/COF formation are identified and optimized: MEL:TPA:DMSO = 0.31:0.36:0.33. Furthermore, the optimal synthesis temperature and time were predicted to be 195 ℃ and 14.7 h. Statistical analyses reveal significant factors affecting Cu/COF synthesis, facilitating the development of tailored nanostructures with enhanced catalytic performance. The catalytic efficacy of the optimized Cu/COF materials is evaluated in the reduction of 4-nitrophenol, demonstrating promising results in line with the predictions from DOE.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.1
• /
• pp.25-33
• /
• 1998

We have studied the reduction of NO by propane over perovskite-type oxides prepared by malic acid method. The catalysts were modified to enhance the activity by substitution by substitution of metal into A or B site of perovskite oxides. In addition, the reaction conditions, such as temperature, $O_2$ concentration, space velocity have been studed. In the $LaCoO_3$ type catalyst, the partial substitution of Ba, Sr into A site enhanced the catalytic activity in the reduction of NO. In the $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3(x=0 \sim 1.9)$ catalyst, the partial substitution of Fe into B site enhanced the conversion of NO, but excess amount of Fe decreased the conversion of NO. The surface area and catalytic activity of perovskite catalysts prepared by malic acid method showed higher values than those of solid reaction method. In the $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3$ catalyst, the conversion of NO increased with increasing $O_2$ concentration and contact time. The introduction of water into reactant feed decreased the catalytic activity.

• Journal of the Korean Institute of Gas
• /
• v.19 no.5
• /
• pp.20-28
• /
• 2015

This work investigated the size and shape effect of ${\gamma}$-alumina-supported metal oxides on the hydrocarbon selective catalytic reduction of nitrogen oxides. Several metal oxides including Ag, Cu and Ru were used as the catalysts, and n-heptane as the reducing agent. For the Ag/${\gamma}$-alumina catalyst, the $NO_x$ reduction efficiency in the range of $250{\sim}400^{\circ}C$ increased as the size of Ag decreased (20 nm>50 nm>80 nm). The shape effect of metal oxides on the $NO_x$ reduction was examined with spherical- and wire-shape nanoparticles. Under identical condition, higher catalytic activity for $NO_x$ reduction was observed with Ag and Cu wires than with the spheres, while spherical- and wire-shape Ru exhibited similar $NO_x$ reduction efficiency to each other. Among the metal oxides examined, the best catalytic activity for $NO_x$ reduction was obtained with Ag wire, showing almost complete $NO_x$ removal at a temperature of $300^{\circ}C$. For Cu and Ru catalysts, considerable amount of NO was oxidized to $NO_2$, rather than reduced to $N_2$, leading to lower $NO_x$ reduction efficiency.

• Clean Technology
• /
• v.25 no.1
• /
• pp.63-73
• /
• 2019

Numerical analysis was done to evaluate the chemical reaction and the reduction rate inside of selective non-catalytic reduction to denitrification in combustion process. The $NO_X$ reduction in selective non-catalytic reduction is converted to not only nitrogen but also nitrous oxide. Simultaneous $NO_X$ reduction and nitrous oxide generation suppressing is required in selective non-catalytic reduction because nitrous oxide influences the global warming as a greenhouse gas. The current study was performed compare the computational analysis in the same temperature and amount of NaOH, and in comparison with the previous research experiments and confirmed the reliability of the computational fluid dynamics. Additionally, controlling the addition amount of NaOH to predict the $NO_X$ reduction efficiency and nitrous oxide production. Numerical analysis was done to check the mass fraction of each material in the measurement point at the end of selective non-catalytic reduction. Experimental Value and simulation value by numerical analysis showed an error of up to 18.9% was confirmed that a generally well predicted. and it was confirmed that the widened temperature range of more than 70% $NO_X$ removal rate is increased when the addition amount of NaOH. So, large and frequent changes of the reaction temperature waste incineration facilities are expected to be effective.

• Elastomers and Composites
• /
• v.55 no.3
• /
• pp.191-198
• /
• 2020

Nickel oxide (NiO) nanoparticles were synthesized by a reaction of nickel nitrate hexahydrate (Ni(NO₃)₂·6H₂O) and sodium hydroxide (NaOH). The synthesized NiO nanoparticles were examined with X-ray diffraction, scanning electron microscopy, Raman spectroscopy, and ultraviolet-visible (UV-vis) spectroscopy. The NiO nanoparticles were used as the catalyst for the reduction of o- and m-nitroaniline to phenylenediamine. The reduction rate of m-nitroaniline was faster than that of o-nitroaniline. The reduction rate for both o- and m-nitroaniline increased as the reaction temperature increased. The rate of reduction for nitroaniline followed a pseudo first-order reaction rate law.

• Korean Journal of Materials Research
• /
• v.16 no.5
• /
• pp.323-328
• /
• 2006

In situ electrical conductivity measurements on $V_2O_5WO_3/TiO_2$ catalysts were carried out at between 100 and $300^{\circ}C$ under pure oxygen, NO and $NH_3$ to investigate the reaction mechanism for ammonia SCR (selective catalytic reduction) de NOX. The electrical conductivity of catalysts changed irregularly with supply of NO. It was, however, found that the electrical conductivity change with ammonia supply was regular and the increase of electrical conductivity was mainly caused by reduction of the labile surface oxygen. The electrical conductivity change of catalysts showed close relationship with the conversion rate of NOx. Variation of conversion rate in atmosphere without gaseous oxygen also showed that labile lattice oxygen is indispensable in the initial stage of the de NOx reaction. These results suggest that liable lattice oxygen acts decisive role in the de NOx mechanism. They also support that de NOx reaction occurs through the Eley?Rideal type mechanism. The amount of labile oxygen can be estimated from the measurement of electrical conductivity change for catalysts with ammonia supply. This suggests that measurement of the change can be used as a measure of the de NOx performance.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.563-571
• /
• 2006

Vapor grown carbon fiber (VGCF) nano-materials such as carbon nanotubes and carbon nanofibers were directly grown on the surface of the stainless steel mesh pre-treated by reduction. The reduction of the stainless steel mesh by hydrogen formed small catalytic particles and large particles with bi-modal distribution on the metal surface. When the VGCFs were synthesized on the reduced mesh, carbon nanotubes (CNTs) were dominantly grown from the small catalytic particles without supplying hydrogen gas. However, carbon nanofibers (CNFs) were dominantly grown from the large catalytic particles with hydrogen.

• New & Renewable Energy
• /
• v.20 no.3
• /
• pp.1-11
• /
• 2024

Livestock manure solid fuel has been studied as a promising domestic energy resource for reducing greenhouse gas emissions in agricultural fields. To successfully commercialize this technology, the environmental facilities require optimization in accordance with domestic environmental standards. In the present study, a computational analysis model of a livestock manure solid fuel boiler system was developed using Aspen Plus^® to investigate nitrogen oxides (NOx) emissions and NOx conversion efficiency using urea-based selective non-catalytic reduction (SNCR). All data were compared across different livestock species and simulated at various operating temperatures. The simulation showed that NOx emissions were the highest from chicken manure and the lowest from swine manure. However, when converted to an oxygen concentration of 12%, NOx emissions were the highest from cattle manure. Dominant factors influencing NOx emissions through a range of temperatures were analyzed, and the optimal operating temperature range (875-950℃) was derived.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.229-232
• /
• 2000

산업 현장에서 연소 과정중 발생되는 NOx를 제거하기 위한 방법으로 현재 연구 및 상업 화 대상에서 가장 널리 사용되고 있는 것이 SCR(Selective Catalytic Reduction)과 SNCR((Selective non-catalytic reduction)이다. 그러나, SCR의 경우 높은 장치비와 유지비 가 소요되어, 최근에는 로 내에 요소용액을 직접 분사하여 NOx를 질소와 수증기로 환원시켜 제거하는 방법인 SNCR에 대한 연구가 활발히 진행되고 있는 추세이다.(중략)