• 한국세라믹학회지
• /
• 제51권1호
• /
• pp.19-24
• /
• 2014

Three-layer porous alumina-mullite composites with a symmetric gradient porosity are prepared using a controlled freeze/gel-casting method. In this work, tertiary-butyl alcohol (TBA) and coal fly ash with an appropriate addition of $Al_2O_3$ were used as the freezing vehicle and the starting material, respectively. When sintered at $1300-1500^{\circ}C$, unidirectional macro-pore channels aligned regularly along the growth direction of solid TBA were developed. Simultaneously, the pore channels were surrounded by less porous structured walls. A high degree of solid loading resulted in low porosity and a small pore size, leading to higher compressive strength. The sintered porous layered composite exhibited improved compressive strength with a slight decrease in its porosity. After sintering at $1500^{\circ}C$, the layered composite consisting of outer layers with a 50 wt% solid loading showed the highest compressive strength ($90.8{\pm}3.7MPa$) with porosity of approximately 26.4%.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 2부
• /
• pp.504-511
• /
• 2007

방송과 통신의 융합으로 일컬어지는 인터넷 방송은 기존 매스미디어의 수동적인 사용자에게 자발적이고 적극적으로 참여하여 서로 상호 작용하는 사용자 형태로 바뀌는 커뮤니케이션 환경 변화의 대표적인 서비스라고 할 수 있다. 하지만 현재 운영되고 있는 대부분의 인터넷 방송은 생방송과 녹화방송 모두가 단 방향으로 진행되고 있어, 학습자는 방송의 내용을 일방적으로 들어야만 한다. 따라서, 학습자는 면대 변 수업에서 생길 수 있는 많은 상호작용과 피드백을 방송 도중에는 전혀 받을 수 없게 되며, 교수자는 학습자의 집중을 보장할 수 없으며, 학습자의 학습 위치를 파악하기 어렵게 된다. 이에 본 연구에서는 인터넷 방송 교육에서 방송과 학습자간의 실시간 커뮤니케이션 환경을 부여하고, 학습자의 학습 위치를 고정시켜 학습 충실도와 집중도를 높이기 위한 목적으로 실시간 상호작용 인터넷 방송 시스템을 설계하고, 이를 개발하였다.

• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.127-138
• /
• 2002

There are some cases that dental prosthesis does not operate as properly as expected in oral mouth. The reasons are such as a distortion of the mandibular, a fault of impression taking system or an extrusion of remaining teeth. One of dental prostheses to consider in the situations is the attachment which connects segment bridge. Active discussions are managed on theoretical side of this field but few on clinical side of it, which must be considered first. Accordingly I'd like to suggest a theoretical background for connect attachment of fixed segmented bridge. 1. As a bridge gets longer, burden on dental ligament is increased and the hardness of a bridge is lessened. 2. The flexibility of a bridge increases in ratio to 3 multiplication of the length and decreases in ratio to 3 multiplication of the width of occlusal surface and base of pontic. 3. Precision rest is needed to cope with the shake of teeth and the difference of axis direction among abutments. 4. Female part of the precision rest should be on middle abutment distal and male one on mesial of pontic. 5. Segmented attachment can be efficiently used to cope with long span bridgework and also in case that one piece casting can't be done because of slant of abutment.

• 한국주조공학회지
• /
• 제16권2호
• /
• pp.141-148
• /
• 1996

In high chromium cast iron, the control of matrix microstructure as well as carbide structure is important to the performance as a wear resistant material. In this study, 3.0% C-24.0% Cr white cast irons with various molybdenum contents(residual, 1.0%, 3.0% and 5.0%) were solidified conventionally and unidirectionally for studying their effects on the microstructure and hardness. In the conventional casting, two sets of castings were poured from each melt. One set of the castings consisted of cylindrical bars of 10 and 20mm by 155mm long. The second set of the castings was a cylindrical bar of 30mm by 200mm long. On the other hand, a pep-set mold set on the Cu plate was employed to make the solidification unidirectionally. X-ray diffraction method was used to observe retained austenite and carbides in the high chromium cast iron. The morphology of eutectic $M_7C_3$ carbides changed from needle-like type to nodular type with the increase of Mo content. And, the presence of $M_2C$ carbides was identified in the sample where Mo was added over 3.0 %. Primary and eutectic carbides appeared as rod type and corngrain type, respectively in the unidirectionally solidified samples which were cut to parallel to the solidification direction. In the EDX analysis, Cr concentration was higher in the primary and eutectic $M_7C_3$ carbides, Mo in the $M_2C$ carbides, and Fe in the matrix.

• 한국주조공학회지
• /
• 제37권2호
• /
• pp.38-44
• /
• 2017

Given that the conventional extrusion of high-strength Al alloys such as 7075 aluminum alloys is difficult due to their very low extrudability as compared to that of 6061 aluminum alloys, thixo-extrusion can be used to obtain a high-strength material easily at a lower extrusion pressure as compared to conventional extrusion. In this study, hot- and thixo-extruded 7075 aluminum alloys are prepared by a vertical forward extrusion process and their microstructures, hardness levels, and compressive properties are investigated. Hot-extruded alloy bars are assessed to obtain a microstructure elongated in the extrusion direction, whereas with thixo-extruded alloy bars, it was possible to obtain a microstructure having fine and equiaxed grains by dynamic recrystallization. The resulting isotropy and improved formability at the hot deformation temperature of the thixo-extruded alloy were attributed to the fine and equiaxed grains formed by the thixo-extrusion process.

• Nuclear Engineering and Technology
• /
• 제40권3호
• /
• pp.183-190
• /
• 2008

Pyroprocessing is the optimal means of treating spent metal fuels from metal fast fuel reactors and is proposed as a potential option for GNEP in order to meet the requirements of the next generation fuel cycle. Currently, efforts for research and development are being made not only in the U.S., but also in Asian countries. Electrorefining, cathode processing by distillation, injection casting for fuel fabrication, and waste treatment must be verified by the use of genuine materials, and the engineering scale model of each device must be developed for commercial deployment. Pyroprocessing can be effectively extended to treat oxide fuels by applying an electrochemical reduction, for which various kinds of oxides are examined. A typical morphology change was observed following the electrochemical reduction, while the product composition was estimated through the process flow diagram. The products include much stronger radiation emitter than pure typical LWR Pu or weapon-grade Pu. Nevertheless, institutional measures are unavoidable to ensure proliferation-proof plant operations. The safeguard concept of a pyroprocessing plant was compared with that of a PUREX plant. The pyroprocessing is better adapted for a collocation system positioned with some reactors and a single processing facility rather than for a centralized reprocessing unit with a large scale throughput.

• 한국주조공학회지
• /
• 제22권3호
• /
• pp.130-136
• /
• 2002

The growing use of aluminum for castings over the past decade has brought with it the increased scrutiny of component properties. One area that has received much attention is the effect of in inclusions - or impurities particles held in the metal - on casting properties. A new method of electromagnetic separation for removal of inclusions in aluminum alloy melts is proposed. The principle is that as the electromagnetic force induced in metal acts on inclusions due to low electric conductivity, they are moved to the direction opposite to electromagnetic force and can be separated and removed from the melt. Experiments were carried out on A356 melt mixed alumina particles and commercial Al alloys of ADC 10 and 12. In the experiment using A356, it was proved that $Al_2O_3$ particles was separated and removed continuously from matrix melt by electromagnetic force. Based on these results, the continuous separation experiment that used ADC 10, 12 was carried and the cleanliness of melt was assessed by the amount of porosity, hydrogen contents, PoDFA and mechanical properties through tensile test. As the results of analyses, the amount of porosity and hydrogen contents decreased without variation of chemical composition in the specimen that passed the electromagnetic continuous separator. In addition, tensile strength and elongation of this specimen increased by $20{\sim}30%$ because of reduction of inclusions.

• Journal of Contemporary Eastern Asia
• /
• 제20권1호
• /
• pp.151-168
• /
• 2021

Misguided use, manipulation, misappropriation, disruption and mismanagement of Information deeply affects the infosphere as well as the social and moral fabric of a society. Information ethics is an attempt to bring the creation, organization, dissemination, and use of information within the ambit of ethical standards and moral codes. The diverse and inherently pluralistic nature of societies however puts forth an additional demand on us - to come up with an intercultural information ethics. An intercultural ethics which is other-centric, context sensitive and workable without being homogenizing, patronizing and colonizing. An endeavor in that direction has already been made by proponents of intercultural information ethics like: Charles M. Ess, Fay Sudweeks, Rafael Capurro, Pak-Hang Wong, Soraj Hongladarom et al. In our paper, we propose that the kind of ethical pluralism being sought in the domain of information ethics can be attained by having a reappraisal of the current methodological strategies, by casting a critical relook at the Eurocentric ethical model. This paper analyses the current framework of Intercultural Information Ethics. And in an endeavour to move towards an all-encompassing, other-centric, workable, intercultural, harmonious and compassionate model of 'Pluralistic Information Ethics', it proposes the Indian / Asian philosophical method of 'Samvāda' to the current inventory which includes methods like: 'parrhesia/free speech' and 'interpretive phronēsis.

• 수산해양기술연구
• /
• 제36권3호
• /
• pp.175-185
• /
• 2000

한국 연근해에서 조업하고 있는 어선을 효율적으로 관리할 수 있는 어선관제시스템의 구축을 위한 기초 연구로서 제주도 성산포항을 거점으로 하여 조업중인 대형선망어선단의 어로과정의 ARPA 영상을 디지털신호로 변환시켜 분석하고 VTMS를 이용하여 모의실험을 행한 결과를 요약하면 다음과 같다. (1) 대형선망어선단의 어로과정을 분석한 결과 투망소요시간은 16분, 양망소요시간은 35분이었고, 앞잡이 배가 끌어 주는 로프의 길이는 200m, 투망시 선회경은 340.8m, 선회속도는 약 6kts로써 조업 과정을 명확하게 파악할 수 있었다. (2) 실선실험에서 구한 투$.$양망과정에 유향$.$유속을 NE, 2kts와 SW, 2kts로 가상하여 시뮬레이션한 결과, 각각 SW, NE 방향으로 편위됨을 알 수가 있었다. 이와 같이 어장환경정보 또는 어업 정보나 조선정보를 관제시스템에 가미함으로써 실제조업과 같은 상황을 예측할 수 있었으며, 클로즈업시킨 화면을 통해 투 양망중 예상되는 상황과 문제점을 검토할 수 있었다. (3) 시뮬레이션에서 사용한 VTMS의 레이더 관제범위는 16mile이었고, 관제범위를 넘었더라도 타관제선으로의 이관이 가능하였다. 또한, 관제선과 집단선단들과의 거리와 방위를 측정하고 분석하면 관제선의 위치선정이 용이함을 알 수 있었다. (4) 조업선들이 어황정보와 안전항행정보를 제공받아 안전하고 효율적인 조업을 행할 수 있는 어선관제 시스템(FVTMS)의 예측모델을 제시하였다. 이와 같이 VTMS용 관제시스템을 이용하여 선단조업어선의 어로과정에 대한 시뮬레이션 한 결과, 근접조업에 따른 잦은 경보와 추적 상실 등 몇가지 기능상의 문제점이 발견되었으므로 어선관제시스템(FVTMS)에 적합한 프로그램이 시급히 개발되어야 할 것으로 사료된다. 대한 추종 성능이 현용 어로시스템에 비하여 매우 우수하기 때문에 해상에서 어로작업시 과부하에 대한 어구의 손상 방지 및 조업 효율의 향상에 크게 기여할 것으로 판단된다.Exp.2), 실험 수온 27$^{\circ}C$에서, Exp. 1에서와 동일한 3개의 수리학적 부하량에서 산소 전달률을 측정한 결과, Exp. 1에서와 같이 수리학적 부하량과 매질의 깊이의 증가에 따라 산소 전달률이 증가하였으며, 매질의 깊이가 가장 깊은 36 cm에 대해, 수리학적 부하량이 2 $m^3$/$m^2$/min 일때, 2 kg 02 kg $O_2$/kW-hr의 가장 높은 표준에어레이션효율을 나타내었다. 위의 두 실험 결과에 따라 packed column 에어레이터에서 발포스티로폼 입자를 산소전달 매질로 이용하여 산소 전달률을 증가시킬 수 있다는 것을 확인할 수 있었다.i, Cu, Y, Nb, La, Nd, Pb, Th in excess of 10 ppm. Relatively high amount of most trace elements were detected in the Hwangto. The major and minor chemical compositions of the Hwangto were different depending on the types of host rocks. However, their difference was in the similar range compared with the compositions of host rocks. electron acceptor triggers sensory transduction processes in B. japonicum.t the Christian rejection

• 패션비즈니스
• /
• 제24권5호
• /
• pp.35-51
• /
• 2020

To satisfy consumers' desire to enjoy their own individuality and cultural trends, the discovery of various materials and the expression of materials embodying their characteristics are increasingly important in the fashion jewelry industry. This study examines, paper mulberry fiber, a raw material of hanji that has been excavated as a new material for fashion jewelry, is durable as wall as, soft and easy to form, has a unique texture along with, excellent aesthetic quality, and expresses various colors, thereby differentiating itself from traditional fashion jewelry materials. The material itself also has symbolic significance as an approach to discovering new sustainable materials for fashion jewelry to ensure increased specificity of the product based on the premise of freedom of expression. The weight and optimal drying time of chicken fiber were derived for the study of fashion jewelry expression using the characteristics of paper mulberry fiber. The techniques of casting, deflection, packing and winding (winding beads with fibers and straps) were derived and four brooches were produced in total. This study is meaningful for the future of, the fashion jewelry industry as it presents the uses of new materials such as paper mulberry fiber to induce multidisciplinary consumption and to suggest a direction for the creation of new value-added products. Further, in order to expand the realm of fashion jewelry industry with our own competitive products that have secured our cultural identity and uniqueness in the global market, there must be continued follow-up research on mass production methods for industrialization.