• Journal of Advanced Navigation Technology
• /
• v.12 no.4
• /
• pp.304-310
• /
• 2008

Our ocean where three sides are the seas is the state that the environmental pollution damage is serious because of all kinds of wastes. Therefore, environmental pollution will be considerably decreased if we leans forward in the saddle to manage net which is conquering a section equivalent among wastes and will be helpful to marine ecosystem. This study is to develop a fishing net management system identifying nets cast and withdrawn from the vessel The purpose of FNMS is to manage sailing vessels arrival and departure details in order to manage a net abandoned in the ocean, and restrain the occurrence of the wasted net abandoned without permission in the ocean, and prevent environmental pollution and sailing vessels sank in and around the ocean.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.2
• /
• pp.95-100
• /
• 2009

In this study, the casting process using forged insert was investigated to characterize the manufacturing process by which good mechanical properties can be obtained when compared with existing casting products. Process analysis for the casting design was performed by using FVM (Finite Volume Method) software. In pouring process, three kinds of candidate gating systems are considered and analyzed respectively. The molten metal behavior in gating system is so important that it affects the solidification behavior of the cast. The results show that as the number of gates is increased, hardness of cast was increased and gaps of cast with forged insert were decreased.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.1
• /
• pp.19-30
• /
• 2015

Smart TV manufacturers have constructed automatic Smart TV execution environment for reducing cost of Smart TV testing. However, the conventional test methods still require high cost because of manual test script written by testers. Test scripts manully written have less reusability, and then less reusable scripts cannot be used for new TV models. In this paper, we propose constructing reusable test models for Smart TV and present a model-based Smart TV test script generation method using the modes. And we apply the method to NetCast Smart TV to confirm the effectiveness of enhancing reusability.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.1
• /
• pp.33-41
• /
• 1996

In order to obtain the most favourable classification system for fishing gears, the problems in the existing systems were investigated and a new system in which the fishing method was adopted as the criterion of classification and the kinds of fishing gears were obtained by exchanging the word method into gear in the fishing methods classified newly for eliminating the problems was established. The new system to which the actual gears are arranged is as follows ; (1)Harvesting gear \circled1Plucking gears : Clamp, Tong, Wrench, etc. \circled2Sweeping gears : Push net, Coral sweep net, etc. \circled3Dredging gears : Hand dredge net, Boat dredge net, etc. (2)Sticking gears \circled1Shot sticking gears : Spear, Sharp plummet, Harpoon, etc. \circled2Pulled sticking gears : Gaff, Comb, Rake, Hook harrow, Jerking hook, etc. \circled3Left sticking gears : Rip - hook set line. (3)Angling gears \circled1Jerky angling gears (a)Single - jerky angling gears : Hand line, Pole line, etc. (b)Multiple - jerky angling gears : squid hook. \circled2Idly angling gears (a)Set angling gears : Set long line. (b)Drifted angling gears : Drift long line, Drift vertical line, etc. \circled3Dragged angling gears : Troll line. (4)Shelter gears : Eel tube, Webfoot - octopus pot, Octopus pot, etc. (5)Attracting gears : Fishing basket. (6)Cutoff gears : Wall, Screen net, Window net, etc. (7)Guiding gears \circled1Horizontally guiding gears : Triangular set net, Elliptic set net, Rectangular set net, Fish weir, etc. \circled2Vertically guiding gears : Pound net. \circled3Deeply guiding gears : Funnel net. (8)Receiving gears \circled1Jumping - fish receiving gears : Fish - receiving scoop net, Fish - receiving raft, etc. \circled2Drifting - fish receiving gears (a)Set drifting - fish receiving gears : Bamboo screen, Pillar stow net, Long stow net, etc. (b)Movable drifting - fish receiving gears : Stow net. (9)Bagging gears \circled1Drag - bagging gears (a)Bottom - drag bagging gears : Bottom otter trawl, Bottom beam trawl, Bottom pair trawl, etc. (b)Midwater - drag gagging gears : Midwater otter trawl, Midwater pair trawl, etc. (c)Surface - drag gagging gears : Anchovy drag net. \circled2Seine - bagging gears (a)Beach - seine bagging gears : Skimming scoop net, Beach seine, etc. (b)Boat - seine bagging gears : Boat seine, Danish seine, etc. \circled3Drive - bagging gears : Drive - in dustpan net, Inner drive - in net, etc. (10)Surrounding gears \circled1Incomplete surrounding gears : Lampara net, Ring net, etc. \circled2Complete surrounding gears : Purse seine, Round haul net, etc. (11)Covering gears \circled1Drop - type covering gears : Wooden cover, Lantern net, etc. \circled2Spread - type covering gears : Cast net. (12)Lifting gears \circled1Wait - lifting gears : Scoop net, Scrape net, etc. \circled2Gatherable lifting gears : Saury lift net, Anchovy lift net, etc. (13)Adherent gears \circled1Gilling gears (a)Set gilling gears : Bottom gill net, Floating gill net. (b)Drifted gilling gears : Drift gill net. (c)Encircled gilling gears : Encircled gill net. (d)Seine - gilling gears : Seining gill net. (e)Dragged gilling gears : Dragged gill net. \circled2Tangling gears (a)Set tangling gears : Double trammel net, Triple trammel net, etc. (b)Encircled tangling gears : Encircled tangle net. (c)Dragged tangling gears : Dragged tangle net. \circled3Restrainting gears (a)Drifted restrainting gears : Pocket net(Gen - type net). (b)Dragged restrainting gears : Dragged pocket net. (14)Sucking gears : Fish pumps.

• Transactions of Materials Processing
• /
• v.12 no.1
• /
• pp.60-65
• /
• 2003

HIP diffusion bonding of Ni-based superalloys, cast Mar-M247 (MM247) and Udimet 720 (U720) powder, was experimentally and numerically studied. Subsolvus HIP treatment was optimized by investigating the variations of high temperature tensile properties of HIP-bonded specimens with powder size, HIP'ing time, etc. While the tensile strength at high temperatures showed no detectable changes, the tensile elongation and reduction in area were slightly increased as the powder size decreased from -140 mesh to -270 mesh. While as-HIP'ed U720 showed a high tensile strength comparable to that of lorded U720 alloy, the HIP diffusion-bonded specimen showed a strength lower than the forged U720 alloy and the cast MM247 alloy The increase of HIP'ing tune from 2 hours to 3 hours resulted in a rapid risc of tensile strength and elongation due to the disappearence of microvoids in the cast MM247. FEM simulation for HIP process was conducted by applying the McMeeking micromechanical model, which uses power-law creep model as constitutive equations. ABAQUS user subroutine CREEP with an implemented microscopic model was used for the simulation. Numerical simulation was shown to be essential for the near-net shape manufacturing as well as the HIP process optimization.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.72-78
• /
• 2020

The present study developed shotcrete for fiber-net integrated tunnel support system, which consists of fiber-net support materials including netlike fiber and shotcrete and integration technology between support materials. In addition, in order to evaluate the field applicability of the developed tunnel support system and compare with the performance of steel fiber reinforced shotcrete, mock -up test was conducted on the mock -up structure. The test results show that in the case of shotcrete containing coarse aggregate(S20A5RP10-C), the excessive rebound rate occurred as the secondary shotcrete was dropped during construction due to the degradation in bond performance with fiber-net. Also, in the case of steel fiber reinforced shotcrete, the amount of cast shotcrete fell short of target value due to the fiber ball and the degradation of pumpability. On the other hand, the amount of cast mortar shotcrete(S20A5RP10-M) and the installation position of fiber-net were almost close to the target values, and the lower rebound rate occurred compared to the steel fiber reinforced shotcrete.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.17-26
• /
• 2013

ISO/IEC 29157 originally developed in the Republic of Korea and is based on commercially available PicoCast v1.0. ISO/IEC JTC1 SC6 was registered by the international standard on May 2010. A single platform for a variety of applications and media formats to support development objectives were. ISO/IEC 29157 based wireless networks, ie, Pico-net to master node periodically transmit sync signal is synchronized to the number of slave nodes have the communications structure. Pico-net also supports a variety of network topologies and direct communication between nodes(single-hop communication) and QoS is guaranteed. But Pico-net network structure has the following problems. Loss of communication problems due to mobile nodes, resulting in limitations of node mobility and wireless network operation range of conventional wireless networks operating range less than 1/4 was reduced to the problem. In this paper, a possible solution to the problems mentioned is proposed, using multi-hop communication technology and sync signal transmission technology between nodes.

• Journal of Korea Foundry Society
• /
• v.28 no.3
• /
• pp.136-140
• /
• 2008

A new concept of salt core, a melting temperature of which is lower than the solidus temperature of cast alloy, was introduced to produced an integrated casting part having a complicated inner shape or requiring under-cut in high pressure die casting or squeeze casting process. The main goal of this study is to develop a new integrated net-shape forming technology using fusible core of lower melting temperature than that of a casting alloy. This integrated net-shape forming technology would be very successful and cost-effective for producing the integrated products having a complicated inner shape or requiring under-cut. The technology for measuring and evaluating a various property of fusible core such as a thermal conductivity and thermal expansion coefficient, melting temperature was established. Also, the work space can be cleaned without a pollution inducing products.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.6
• /
• pp.899-908
• /
• 2023

Droughts can alter the dynamics of aquatic ecosystems, including fish communities. This study compared the variations in fish communities in Juam reservoir before and after drought events. Fish sampling was conducted five times from April 2021 to April 2023 using three different sampling methods (kick net, cast net, and gill net). The water level in the reservoir reached its peak (103.73 EL.m, 62.2% capacity) in September 2021, before the drought, and dropped to its lowest point (88.84 EL.m, 17.6% capacity) in April 2023. The dissolved oxygen content in the reservoir decreased from 27 to 6.3 mg/L between the period with the lowest water level (April 2023) and the period with the highest water level (September 2021). In September 2021, 466 fish were collected, but after one year of drought, the number of individuals decreased to 105. Further, the number of fish collected and water levels were positively correlated. Dominant species exhibited a population decline of over 60% with decreasing water levels. These findings highlight the importance of fishery resource management during drought periods.

• Korean Journal of Environment and Ecology
• /
• v.38 no.3
• /
• pp.263-276
• /
• 2024

Fish community characteristics and the influence of sampling gear were investigated in Lake Singal, South Korea, from August 2020 to October 2021. The employed sampling gears included a kick net, cast net, gill net, and fyke net, which are commonly utilized within the lake. Across three survey stations, a total of 18 fish species from seven families, comprising 3,501 individuals and contributing to a total biomass of 117,670 grams, were identified. Dominance among species was assessed based on individual count and biomass. Pseudorasbora parva was the most abundant, constituting 29.9% of the total catch, followed by Zacco platypus (25.1%) and Micropterus salmoides (19.3%). In terms of biomass, Carassius auratus was predominant, accounting for 45.1%, followed by Cyprinus carpio (17.4%) and M. salmoides (14.3%). Among the sampled species, three were identified as endemic to Korea: Squalidus japonicus coreanus, Cobitis nalbanti, and Odontobutis interrupta. Additionally, four exotic species were recorded, including M. salmoides and Lepomis macrochirus, both classified as invasive alien species, along with C. cuvieri and a variant of Cyprinus carpio (nudus type). Analysis of the average standard length (SL) and body weight (BW) revealed significant size variations among species. P. parva, the dominant species, measured 60 ± 24.1 mm (SL) and weighed 4.4 ± 3.42 g (BW). The subdominant species, Z. platypus, exhibited an SL of 82 ± 17.6 mm and a BW of 10.4 ± 7.27 g. M. salmoides, another dominant species, registered 96 ± 25.1 mm (SL) and 24.9 ± 96.02 g (BW), while C. auratus measured 125 ± 77.3 mm (SL) and weighed 168 ± 336.5 g (BW). In terms of gear-specific performance, the kick net captured eight species from three families, totaling 302 individuals with a biomass of 1,269 g. The cast net was more effective in coastal zones, collecting 11 species from four families, amounting to 948 individuals and 31,343 g of biomass. The gill net yielded the highest biomass, capturing 13 species from four families with 682 individuals weighing 69,695 g. The fyke net recorded the highest species diversity and number of individuals, capturing 15 species from seven families, totaling 1,569 individuals and 15,362 g of biomass. The fyke net proved most efficient in species and individual counts, whereas the gill net was superior for biomass collection. Conversely, the kick net demonstrated effectiveness in collecting small benthic species in coastal areas.