• Journal of the Korean Geotechnical Society
• /
• v.18 no.3
• /
• pp.87-94
• /
• 2002

Recently, there have been numerous attempts to expand the traditional temporary soil nailing system into a permanent wall. Two reasons for this include the soil nailed system's advantage of efficient and economic use of subgrade space and its ability to decrease the total construction cost. However, the systematic and logical design approach has not been proposed yet. The permanent soil nailing wall system, which utilizes precast concrete from soil nailing system, is already used in many countries, but the study of cast-in-place concrete lacing or rigid walls in bottom-up construction of traditional soil nailing walls is imperfect and insufficient. In this paper, various laboratory model tests have been carried out to investigate the influence of parameters, including stiffness of the rigid wall to the soil nailing structure with respect to failure mode, displacement patterns and tensile forces at the nail head in several levels of load. Then, the variation of earth pressure distribution on the soil nailing wall, built with a rigid front plate, is sought through different levels of surcharge load and tensile forces at the nail head.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.41-51
• /
• 2005

Statement of problem. Anatomic landmarks have been used in the orientation of occlusal plane and the determination of vertical dimension for edentulous patients. Such as labial vestibules of anterior region and hamular notches, retromolar pads of posterior region are very useful anatomic landmarks for fabrication of occlusion rim because they are to be identified on master casts. Therefore, if average distances between landmarks of maxillae and mandible in dentate subjects are measured and applied, not only occlusal plane but also vertical dimension can be established initially. Purpose. The purpose of this study is to measure vertical distances between anatomic landmarks and to present a guide to the orientation of occlusal plane and the determination of vertical dimension of edentulous patients. Material and method. Upper and lower border-molded casts were made in 93 Korean dentulous subjects, mean age 25 years. Incisal edges of central incisors, bottoms of labial vestibules, hamular notches and the half level of retromolar pads were marked on casts. Measurements of vertical distances from incisal edge of central incisor to the bottom of labial vestibule, between upper and lower bottoms of labial vestibules, from hamular notch to retromolar pad and from hamular notch to the occlusal plane established by the incisal edge of maxillary central incisor and mesiopalatal cusps of both maxillary first molars were made on each cast. Results and conclusion. 1. The mean distance from the incisal edge of central incisor to the bottom of labial vestibule was 20.8mm(SD 1.7) on upper casts and 17.3mm(SD 1.4) on lower casts. 2. The mean distance between both bottoms of labial vestibules of upper and lower casts was 35.0mm(SD 2.7). 3 The mean distance from hamular notch to the half level of retromolar pad was 5.0mm(SD 1.3). 4. The mean distance from hamular notch to occlusal plane was 7.9mm(SD 1.5). 5. Distances from incisal edge of central incisor to labial vestibule on lower casts(P<0.01) and from hamular notch to retromolar pad(P<0.0001) were greater in male than in female.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.1
• /
• pp.21-29
• /
• 2004

Statement of problem : Because dental impression can be a cross-infection source, disinfection, such as immersion disinfection is nessecary. However, the disinfection process may change the volume of the impression cast. Purpose : The purpose of this study is to find out the effects on dimensional change of different storage times and methods, of agar-alginate impression when immersed in a 5% idophor disinfectant. Material and Methods : An agar-alginate impression was made from a mandible model and then was disinfected and stored according the experimental conditions and a stone model was produced. Measurements were taken between reference points on the original mandible model and they were compared to measurements taken between reference points on the stone model. The study was divided into 4 groups. In group 1, the impression was stored in a 100% humidor for 30 minutes, 1 hour, 2 hours, 3 hours, 4 hours, 6 hours, 12 hours and 24 hours and stone models were made at each time. In group 2, the impression was immersed in 5% idophor disinfectant and then stored in a 100% humidor for the same length of times as group 1, and stone models were made at each time. In group 3, the impression was stored in extend-A-pourR, a special storage solution for 30 minutes, 1 hour, 2 hours, 3 hours, 4 hours, 6 hours, 12 hours, 24 hours 3 days, and 7 days and stone models were made at each time. In group 4, the impression was immersed in 5% idophor disinfectant and then stored in stored in extend-A-pourR, a special storage solution for the same length of times as group 3, and stone models were made at each time. 5 impressions and stone models were made at each time to make a total of 180. The Student-t test (P < .05) was used to do a statistical analysis of the measurements of the mandible model and stone models. The repeated-measure 2-way analysis of variance (P < .05) was used to do a statistical analysis of the difference in the 4 groups. Results : The percent liner dimensional change was from $0.25{\pm}0.03%$ (group 1, 30 minutes) to $0.34{\pm}0.06%$ (group 4, 7 days). No significant change was noticed between the 4 groups. Conclusion : According to the above study, in both methods, least dimensional change was recorded when the storage times were short and in both methods, immersion in 5% idophor disinfectant did not effect dimensional change in the agar-alginate impression.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.4
• /
• pp.474-493
• /
• 1999

According to repeated measurements and correction procedures, the accuracy of the phase-shifting profilometry was developed. At first, after 20 final models for maxillary complete denture were duplicated , the mucosa sur-faces of models were measured with the phase-shifting proflometry and each mirror view of these was calibrated. Maxillary casts were divided into 4 groups of 5 casts per each, and wax dentures with 2 sheets of baseplate wax and artificial teeth were made and then cured according to the curing method of each group. Group I ; quick curing with QC-20 acrylic resin Group II ; 9 hour curing with QC-20 acrylic resin Group III ; SR-Ivocap system Group IV ; metal base and quick curing with QC-20 acrylic resin. After curing, polishing, and storing at $37^{\circ}C$ in saline for 30 days, the forms of the impression surface of the dentures were measured with the phase-shifting profilometry. Then, the impression surface form of each denture was placed in the optimal position of com-parison with the mirror view of the same final cast. The amount and direction of distortion of each denture was analyzed and the effects of polishing and storage in each denture were compared, The obtained results were as follows : 1. In Group I, the denture was observed as the appearance distorted in the opposite direction of the mucosa and the postero-lateral part of palatal portion of the denture was observed as the appearance separated from the mucosa. Also, the buccal flanges of the denture were observed as the appearance distorted in the direction of the mucosa. 2. In Group II, the postero-lateral part of palatal portion of the denture was observed as the appearance separated slightly from the mucosa. The bilateral buccal flanges of denture were observed as the appearance distorted severely in the direction of the mucosa. 3. In Group III the bilateral part of the residual ridge crest portions and the buccal flanges of the denture were observed as the appearance distorted in the direction of the mucosa, and specially, the buccal flanges of the maxillary tuberosities were distorted severely. 4. In Group IV, the acrylic resin base of the buccal portion of the denture was observed as the appearance distorted in the opposite direction of the mucosa. 5. The phase-shifting profilometry, done with repeated measurements and correction procedures, was effective in comparing the amount and direction of distortion at every position after the laboratory work and the delivery of maxillary complete denture.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.85-91
• /
• 2012

Purpose: The object of this study was to determine if the low-priced alloy and metal UCLA abutment could be available for manufacturing bar-retained framework of implant prosthesis. Materials and methods: Bar structure was classified into 4 groups, The specimen of group 1 and 2 were based on casting high noble metal alloys and noble metal alloys with gold UCLA abutment. The specimen of group 3 and 4 were based on casting noble metal alloys and base metal alloys with metal UCLA abutment. Cast bar structure was installed in an acrylic resin model and only the screw on the hexed abutment side was tightened to 20 Ncm. On the opposite side, vertical discrepancy was measured with stereo microscope from front, back, and lateral side of the implant-abutment interface. One-way ANOVA was performed to analyze the marginal fit discrepancy. Results: One-way ANOVA test showed significant differences among all groups ($P$<.05) except for Group 1 and 3. Among them, difference between Group 1 and 2 was noticeable. Measured vertical discrepancies were all below $70{\mu}m$ except to Group 2. Conclusion: Base metal alloy and metal UCLA abutment could be used as an alternative to high-priced gold alloy for implant bar-retained framework.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.1
• /
• pp.51-57
• /
• 2012

The anterior maxillary incisor is the most traumatized region in the mouth and trauma is frequent between the ages of 8-10. Traumatic loss of teeth, can lead to many complications in children. Thus, as possible to keep traumatic teeth, but if you need extractions There may be. Complications occur and early tooth loss is frequent. Complications of early loss of central incisors are esthetic compromise, loss of vertical and horizontal width, height, contour of alveolar bone, tilting of adjacent teeth, arch length loss. Alveolar bone loss may affect normal function and stability, and results in esthetic problem for future prosthesis restoration. The 9-year-old girl and 6-year-old boy got early loss of upper central incisor. The amount of alveolar bone resorption was measured using cone beam computed tomograph and cast analysis.

• Journal of Radiation Protection and Research
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2006

For the first step to develop a reference disposal container of spent fuel to be used in a deep geological repository, this paper examined safe dimensions of the disposal container on the points of nuclear criticality and radiation safety and mechanical structural safety and provided basic information for dimensioning the container and configuration of the container components, and establishing the favorable and safe disposal conditions. When the safety factor for stress due to the external loads (hydrostatic and swelling pressure) is taken as 2.0, the safe diameter of the filler material to provide enough container strength under the assumed external loads is found to be 112cm with 13cm spacing between inner baskets in PWR container. Also the thickness of the thinner section between the fuel basket and the surface of the cast insert is determined to be 150 mm. Regarding these dimensions of the container, the PWR fuel container is sketched to accommodate 4 square assemblies or 297 CANDU fuel 297 bundles (33 circle tubes x 9 stacks). However the top and bottom parts need to be checked again through the detail radiation shielding analysis with respects to the emplacement position and handling processes of the disposal container.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.145-156
• /
• 2010

Loss of posterior support may cause overloading and excessive wear of remaining teeth. Moreover, the extrusion of antagonistic teeth leads to the destruction of the occlusal plane. The loss of vertical dimension of occlusion (VDO) also emerges clinically, which may bring the loss of esthetic appearance and function. These patients who suffer from the loss of posterior support, often require vigorous periodontal treatments (osteotomy, crown lengthening) and extensive oral rehabilitation. Sixty three years old female patient visited for the prosthetic treatment of the posterior edentulous area. She had no other systematic disease and parafuctional habits for prosthetic treatment. Intraoral and radiographic examinations were done. The evaluation of VDO and vertical dimension of rest position were evaluated for proper prosthetic procedures and diagnostic wax up was done. As a result of diagnosis, VDO was increased by 2 mm considering the loss of VDO and space for the prosthetic treatment. After the pretreatments, initial preparation of teeth and provisionalization were carried out. Six weeks later of provisionalizaion, final preparation and impression was performed. Using the duralay resin copings, jaw relation was registered. The master cast was mounted and definitive restoration was fabricated. After the evaluation of esthetic and function, pick up impression for clinical remounting was done. Lucia jig was made for new jaw relation and occlusal adjustment on the articulator. Definitive restoration was delivered and the patient was periodically recalled for additional occlusal adjustment. From this case, the satisfactory functional and esthetic results through full mouth rehabilitation with increase vertical dimension were achieved.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.853-859
• /
• 2001

The dispersion stability of nano $Y_2O_3-CeO_2$ system was investigated using colloid surface chemistry. Green body of $Y_2O_3$ doped $CeO_2$ was prepared by slip casting in and aqueous system. The dispersion stability of suspension between powders and organic additive was accomplished through electrokinetic behavior of suspension, which was done by ESA apparatus. The dynamic mobility of particles was enhanced when the anionic dispersant of the amount of 1wt% was added. The dissolution of $Y^{3+}$ ion in suspension occurred in the acidic region so that pH value in slurries did not move to below 7.0. In the $CeO_2-Y_2O_3$ system, optimal preparation of suspension was made after adding the anionic dispersant as the amount of 1wt% and pH value of 11.0, and then slip-cast and sintered at 1400$^{\circ}$C, 2 hrs. It appeared relative density of >98% and homogeneous distribution of Y element in depth direction as well as in the microstructure of surface.

• Korean Journal of Environment and Ecology
• /
• v.32 no.2
• /
• pp.154-164
• /
• 2018

We investigated the ichthyofauna and fish community structure of the Mudeungsan National Park, Korea from 2014 to 2016 to prepare a conservation plan. We collected 21 species of 6 families collected from 8 survey stations through skimming nets and cast nets during the period. The dominant and subdominant species were Zacco temminckii (43.0%) and Rhynchocypris oxycephalus (15.1%), respectively. The other abundant species were Z. platypus (11.2%), Pungtungia herzi (10.1%), Squalidus gracilis majimae (8.9%), and Z. koreanus (4.5%). Among the fish collection, 13 species (61.9%) were Korean endemic species, but, endangered species and exotic species were not found. Similarity indices based on species composition and abundance showed the clear division of the fish community into two river systems (Yongsan River drainage system (St. 1-7) and Seomjin River drainage system (St. 8)). The Youngsan River system was further divided into the uppermost (St. 1, 2, 4, 6, and 7) and the upper-middle (St. 3 and 5) regions. The number of species appearing in a year was similar at 19 to 20 throughout the survey period. However, the individual number of fish in 2015 (2,670) was 20% less than that of 2014 (3,366) and 2016 (3,429), respectively. The probable reason for this decline is the rapid decline of stream level in 2015 compared to the other years. During the survey period, river works were undergoing at 3 out of 8 stations, having created disturbance in fish habitat and especially impacted on benthic fishes.