• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.5
• /
• pp.35-42
• /
• 2014

Thermal analysis properties and adhesive properties of self-healing agents were evaluated through differential scanning calorimetry, reaction heat measurement, and adhesive shear test. D1E0, D3E1, D1E1, D1E3, and D0E1, depending on the mixing ratio of DCPD and ENB, were considered as self-healing agents. The amount of Grubbs' catalyst, depending on the type of self-healing agents, was varied from 0.1 wt% to 1.5 wt%. In the case of DCPD, the polymerization reaction occurred faster and the stabilized adhesive strength increased as the amount of catalyst increased; however, a large amount of catalyst was required. ENB had excellent reactivity with a small amount of the catalyst; however, high reaction heat was observed at the early stage of polymerization. Thermal analysis properties and adhesive properties of self-healing agents can be controlled by varying a mixing ratio of DCPD and ENB. Among the self-healing agents used for this study, the D3E1 would be one of the most preferable candidates with regard to maximum adhesive strength, reaching time to maximum adhesive strength, stabilized adhesive strength, and reaction heat.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.23 no.4
• /
• pp.179-191
• /
• 2018

In order to determine the distribution characteristics of the heavy metals in surface sediments of the eastern Yellow Sea, heavy metal concentrations (Cu, Pb, Zn, Cd, Cr, Mn, As, Ni, Co, Li, Fe and Al) together with grain size and total organic carbon (TOC), were analyzed. The concentrations of all heavy metals, with the exception of Pb, Mn and As in some stations, were relatively high in the central area of the Yellow Sea and tended to decrease toward the Korean coast. A significant relationship between grain size and concentrations of heavy metals suggested that they were mostly controlled by quartz dilution effect. However, at some stations, Pb, Mn and As exhibited different distribution patterns. For Pb, the differences were caused by petrogenetic influences (feldspar) in coarse-grained sediments. In the case of Mn, biogenetic influences ($CaCO_3$) affected distribution patterns. As was distributed differently because of the existence of a heavy mineral (pyrite). A comparison with previous data (collected in 2000) shows that the heavy metal concentration in the eastern Yellow Sea has not increased over the past fifteen years. The sedimentary environment of dumping sites in the Yellow Sea has not been significantly improved during this period. The results of the pollution assessment revealed that the concentrations of heavy metals in the study area were lower than lower criteria (TEL, MSQ-1) in Korean and Chinese sediment quality guidelines. The enrichment factor (EF), geo-accumulation index ($I_{geo}$) and ecological risk index (ERI) of Cu, Pb, Zn and Cr were higher in the central area of the Yellow Sea.

• Journal of Bio-Environment Control
• /
• v.28 no.1
• /
• pp.9-15
• /
• 2019

This study aimed to examine the effects of different degrees of defoliation during harvest season on hydroponically cultured 'Seolhyang' strawberry's fruit characteristics, plant growth, and changes in nonstructural carbohydrates, and find an effective defoliation method. On November 29, 2013, some of the 'Seolhyang' leaves were non-defoliated and the others were defoliated remaining 9 and 5 leaves. The number of fruits and fruit weight were not significantly different in the first flower cluster but in the second, third, and fourth flower clusters decreased as the level of defoliation increased. The soluble solids content and acidity of fruits decreased in all the clusters as the level of defoliation increased. The leaf area and leaf dry weight of strawberry plant in all the treatment groups decreased from January to March and root dry weight sharply decreased during February. Thereafter, during April, the growth of plant increased. As defoliation increased, the dry weight of fruits, flower clusters, crowns, and roots decreased, and during late growing period, difference in dry weight according to the degree of defoliation was considerable. The content of carbohydrate was greater in the leaves than the fruits excepting January 30 and February 28, 2014 and in the case of strawberry plant that continuously produce fruits, the content of carbohydrate decreased in the leaves and roots. As defoliation increased, the content of carbohydrate in fruits, flower clusters, crowns, and roots decreased. Defoliation for strawberry plants is carefully done during harvest season. Twelve leaves during December and 14 leaves from January to March should be maintained, and in April when the number of leaves increases, old leaves should be defoliated.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.1-7
• /
• 2019

Purpose: The laser processability of dental prosthesis is investigated using two ceramic composites, including 3M, Lava Ultimate and Ivoclar vivadent, IPS e.max. Materials and methods: The $CO_2$ laser, picosecond laser and femtosecond laser are used to assess the processing power of dental prosthetic materials Lava Ultimate and IPS e.max and the line processing shape was measured using a confocal microscope. Results: The brittleness, carbonization and micro crack of the ceramic composite were influenced by heat accumulation of the material and could be controlled by the laser power and pulse time. Conclusion: In the case of $CO_2$ lasers, micro crack and carbonation occurred immediately, and in the picosecond laser processing, the micro cracks are partially improved, but the carbonization occurs continuously. Finally, we confirmed the high efficiency of laser processing with femtosecond laser. In particular, Lava Ultimate, a ceramic resin composite material, showed the best processability when processed using a femtosecond laser.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.3
• /
• pp.226-236
• /
• 2021

Objectives: Concerns have been raised about the possible health effects of radon on both workers and consumers with the spread of social attention to the impact of radon exposure. Thus, an entire raw material handling workshop was investigated, and standards for radon levels in the workplace were newly established at 600 Bq/m³. However, regulations on the management of workers exposed to radon are still insufficiently developed. Therefore, by comparative analysis of overseas and domestic radon-related regulations for workplaces, this study aims to suggest improvement plans of protection regulations under the Occupational Safety and Health Act (OSH Act) for the prevention of health disorders of radon-exposed workers. Methods: For overseas case studies, we consulted radon-related laws and reports officially published on the websites of the European Union (EU), the United States (U.S.) and the United Kingdom (UK) government agencies. Domestic law studies were conducted mainly on the Act on Protective Action Guidelines against Radiation in the Natural Environment and the OSH Act. Results: In Europe, the basic safety standards for protection against risks arising from radon (Council Directive 2013/59/EURATOM of 5 December 2013) was established by the EU. They recommend that the Member States manage radon level in workplaces based on this criterion. In the U.S., the standards for workplaces are controlled by the Occupational Safety and Health Administration (OSHA) and the Mine Safety and Health Administration (MSHA). Action on radon in the UK is specified in "Radon in the workplace" published by the Health and Safety Executive (HSE). Conclusions: The Act on Protective Action Guidelines against Radiation in the Natural Environment mainly refers to the management of workplaces that use or handle raw materials but does not have any provisions in terms of protecting naturally exposed workers. In the OSH Act, it is necessary to define whether radon is included in radiation for that reason that its current regulations have limitations in ensuring the safety workers who may be exposed to naturally occurring radon. The management standards are needed for workplaces that do not directly deal with radon but are likely to be exposed to radon. We propose that this could be specified in the regulations for the prevention of health damage caused by radiation, not in Article 125 of the OSH Act.

• Particle and aerosol research
• /
• v.17 no.4
• /
• pp.125-132
• /
• 2021

Fresh PM_2.5 smokes emitted from combustion of four biomass materials (pellet, palm fruit fiber (PFF), PKS, and sawdust) in a laboratory-controlled environment were characterized using an attenuated total reflectance-fourier transform infrared (ATR-FTIR) technique. In smoke samples emitted from combustion of pellets, PFF and PKS, which is being used as boiler fuels for greenhouses in rural areas, the organic carbon/elemental carbon (OC/EC) ratios in PM_2.5 were very high (14.0-35.5), whereas in sawdust smoke samples they were significantly low (<4.0) due to the combustion method close to flaming combustion. ATR-FTIR analysis showed that OH(3400-3250 cm^-1), CH₃(2958-2840 cm^-1), CH₂(2910 cm^-1 and 2850 cm^-1), ketone(1726-1697 cm^-1), C=C(1607-1606 cm^-1 and 1515-1514 cm^-1), lignin (1463-1462 cm^-1 and 1430-1428 cm^-1) and -NO₂(1360-1370 cm^-1) peaks were identified in all biomass burning (BB) smoke samples. However, additional peaks appeared depending on the type of biomass. Among the four types of biomass materials, an additional peak of the methylene group CH₃(2872-2870 cm^-1) appeared only in PFF and PKS smoke samples, and a peak of C=O(1685 cm^-1) was also confirmed. And in the case of PKS smoke samples, a peak of aromatic C=C(1593 cm^-1 and 1476 cm^-1) that did not appear in other BB samples was also observed. This indicates that the molecular structure of organic compounds emitted during BB differs depending on the type of biomass materials. The results of this study are expected to provide valuable information to more specifically reveal the effect of BB on PM_2.5 collected in the atmospheric environment.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.279-285
• /
• 2022

This study was carried out to establish proper irrigation standards by growth stages using integrated solar radiation (ISR) for strawberry hydroponics cultivation. The irrigation methods were automatically controlled when it reached ISR values based on the external solar irradiance. The ISR standards were set at 150 J·cm^-2 and 200 J·cm^-2, and as the last treatment, ISR value was changed from 200 J·cm^-2 to 150 J·cm^-2 according to growth stage. The timer-automated irrigation system was applied as a control. The monthly average irrigation frequency of 150 J·cm^-2, growth stages (150 J·cm^-2) treatment in March were 5.6 times, that of 200 J·cm^-2, growth stages (200 J·cm^-2) treatment in December were 2.7 times, and that of timer system was 3.6-3.8 times. The water use efficiency (WUE) of timer was 19.8 g·L^-1 lower than ISR. There was no significant difference in growth and fruit characteristics between ISR and timer. The total yield and rate of marketable fruit of treatments by growth stages was the highest 328 g/10 a and 85.3 %, respectively. Therefore, in case of strawberry hydroponic cultivation, controlling ISR by growth stages was more helpful to improve yield rather than applying same ISR standard during cultivation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.180-183
• /
• 2001

This study was conducted to find out the effect of ripened grain and rice quality by the breeding of rice dust mite (Steneotarsonemus spinki). Growth temperature of sample (Suwon 441 and Ilpumbyeo) was maintained from 22$^{\circ}C$ (during night) to 26$^{\circ}C$ (during day) in a controlled phytotron. Plant hight and number of panicle could not showed the difference by the discoloration degree of leaf sheath. But number of spikelet was reduced affected by discoloration degree of leaf sheath. Ratio discoloration of grain was increased according to circumstances more discoloration degree of leaf sheath in Suwon 441 then Ilpumbyeo. The perfect rice grain was observed to similar Suwon 441 and Ilpumbyeo in the IV degree of ratio discoloration of grain, but less Suwon 441 than Ilpumbyeo in III and II, in such a case comparison between coloration and discoloration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1B
• /
• pp.89-100
• /
• 2010

The performance evaluation of a conventional Wave Resonator at the entrance of harbors against solitary wave has been performed using 3D numerical wave flume. A wave resonator has been designed for the attenuation of the transmitted wave energy by trapping the short periodic incident waves only. In this study, however, the controlled performance of the wave resonator by its various widths has been numerically investigated for solitary waves. Source distribution method based on the Green function and the 3D one-field Model for immiscible TWO-Phase flows (TWOPM-3D) using 3D numerical wave flume were used for the short-periodic waves and the solitary waves, respectively, and these models were verified through the comparisons with the previous experimental and numerical results by other researchers. It was confirmed that the wave resonator is effective enough to control the solitary waves as well as the periodic waves when it compares with the case of no resonance system. Further, it was found that there is the optimal width of a wave resonator to attenuate the target solitary waves.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_2
• /
• pp.743-754
• /
• 2023

The global occurrence of myriad natural disasters and incidents, catalyzed by climate change and extreme meteorological conditions, has engendered substantial human and material losses. International organizations such as the International Charter have established an enduring collaborative framework for real-time coordination to provide high-resolution satellite imagery and geospatial information. These resources are instrumental in the management of large-scale disaster scenarios and the expeditious execution of recovery operations. At the national level, the operational deployment of advanced National Earth Observation Satellites, controlled by National Geographic Information Institute, has not only catalyzed the advancement of geospatial data but has also contributed to the provisioning of damage analysis data for significant domestic and international disaster events. This special edition of the National Disaster Management Research Institute delineates the contemporary landscape of major disaster incidents in the year 2023 and elucidates the strategic blueprint of the government's national disaster safety system reform. Additionally, it encapsulates the most recent research accomplishments in the domains of artificial satellite systems, information and communication technology, and spatial information utilization, which are paramount in the institution's disaster situation management and analysis efforts. Furthermore, the publication encompasses the most recent research findings relevant to data collection, processing, and analysis pertaining to disaster cause and damage extent. These findings are especially pertinent to the institute's on-site investigation initiatives and are informed by cutting-edge technologies, including drone-based mapping and LiDAR observation, as evidenced by a case study involving the 2023 landslide damage resulting from concentrated heavy rainfall.