• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.12
• /
• pp.693-699
• /
• 2013

This paper describes a method for size optimization of the major design variables for solar water heating systems at the stage of concept design. The widely used RETScreen simulation tool was used for optimization. Currently, the RETScreen tool itself does not provide a function for optimization of the design parameters. In this study, an optimizer was combined with the software. A comparative study was performed to evaluate the RETScreen-based approach with the case study of a solar heating system in an office building. The optimized results using the RETScreen model were compared to previously published results with the TRNSYS model. The objective function of the optimization is the life-cycle cost of the system. The optimized design results from the RETScreen model showed good agreement with the optimized TRNSYS results for the solar collector area and storage volume, but presented a slight difference for the collector slope angle in terms of the converged direction of the solutions. The energy cost, life-cycle cost, and thermal performance regarding collector efficiency, system efficiency, and solar fraction were compared as well, and the RETScreen model showed good agreement with the TRNSYS model for the conditions of the base case and optimized design.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.244-251
• /
• 2016

In defense domain, mission level and engagement level simulation tools exist. In order to experiment a simulation scenario for obtaining results of both mission level and engagement level simulations, we should write a same simulation scenario in a mission level simulation tool as well as an engagement level simulation tool, and we have to operate these tools for analysis of each purpose. Moreover, we could not guarantee that these scenarios are completely same since each scenario is composed of different fidelities of simulation models, although the scenarios are written by a same experimenter and with same simulation purpose. To deal with the difficulties, I propose an approach to analysis of both mission level and engagement level simulations from one simulation result. For this, I have built Composite Combat Mission Planning Simulation Environment (CCMPSE). In this paper, the HLA/RTI based simulation composition technology and my experiences for the designed Composite Combat Mission Planning Simulation Control System (CCMPSCS) are explained. Moreover, This paper also conducts a case study with EADSIM, SADM, and the CCMPSCS. Finally, this paper provides lesson learned from the case study.

• Cross-Cultural Studies
• /
• v.19
• /
• pp.411-444
• /
• 2010

This paper explored the academic socialization of a group of Mongolian college students, learning Korean as their L3 (Third Language), by focusing on their uses of an electronic communication channel. From a perspective of the continua of bi-literacy, this case study investigated how Mongolian students who had limited exposure to a Korean learning community overcame academic challenges through the use of a written communication channel as a tool in the socialization process. Data were collected mainly through three methods: written products, interviews, and questionnaires. The results from this study were as follows. Interactional opportunities for these minority students were seriously constrained during the classroom practices in a Korean-speaking classroom. They also described the lack of communicative competence in Korean and the limited roles played by L2 (English) communication as key barriers to classroom practices. However, students' ways of engaging in electronic interactions differed widely in that they were able to broaden interactional circles by communicating their expertise and difficulties with their Korean peers through the electronic channel. More importantly, the communication pattern of "L2-L2/L3-L3" (on a L2-L3 continuum) emerging from data demonstrated how these students used a written channel as a socialization tool to mediate their learning process in a new community of learning. This study argues that a written communication channel should be taken as an essential part of teaching practices especially for foreign students who cannot speak Korean fluently in multi-cultural classes.

• Journal of Korea Artificial Intelligence Association
• /
• v.1 no.1
• /
• pp.11-16
• /
• 2023

Accurate hospital case modeling and prediction are crucial for efficient healthcare. In this study, we demonstrate the implementation of regression analysis methods in machine learning systems utilizing mathematical statics and machine learning techniques. The developed machine learning model includes Bayesian linear, artificial neural network, decision tree, decision forest, and linear regression analysis models. Through the application of these algorithms, corresponding regression models were constructed and analyzed. The results suggest the potential of leveraging machine learning systems for medical research. The experiment aimed to create an Azure Machine Learning Studio tool for the speedy evaluation of multiple regression models. The tool faciliates the comparision of 5 types of regression models in a unified experiment and presents assessment results with performance metrics. Evaluation of regression machine learning models highlighted the advantages of boosted decision tree regression, and decision forest regression in hospital case prediction. These findings could lay the groundwork for the deliberate development of new directions in medical data processing and decision making. Furthermore, potential avenues for future research may include exploring methods such as clustering, classification, and anomaly detection in healthcare systems.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.4 no.2
• /
• pp.172-186
• /
• 1998

This study is intended to develop a reliable and approproate instrument of the clinical nursing education. This research consisted of 4 step. First step is contruction of the content for evaluation. Second step have the research of the content validity by 10 professors in Department of Nursing, H University, the pilot study for the content validity by 20 professors and clinical preceptors, and the survey with four point Likert Scale, which includes from the point of 'strongly valid' to the point of 'strongly non-valid' by 250 professor and clinical preceptor. The data were collected form March 1998 to July 1998. This study was analyzed by Cronbach's for the reliability and the factor analyisis for the validity of the collected data. The third step showed the final evaluation instrument of clinical nursing education which consists a couple of tool. One is the evaluation instrument of clinical nursing which includes the 20 items, the other is the evaluation instrument for case study which includes the 15 items. The fourth step is the test of reliability and validity of the final evaluation too. The results from these step's study showed the higher reliability and validity. Respectly, Cronbach's revealed the evaluation instrument of clinical nursing and case study is Cronbach's $\alpha$=.92413, Cronbach's $\alpha$=.95602. For further research, it needs to develop a reliable and variable instrument of the students self-evaluation and community based instrument.

• International Journal of Highway Engineering
• /
• v.18 no.3
• /
• pp.33-45
• /
• 2016

PURPOSES : Concrete pavement has been used in the construction of the Jungbu expressway in 1987. More than 60% of the pavement on the expressway is currently made of concrete, but most has been used far beyond their design life. Pavement life has been extended through routine maintenance or overlay. However, the structural capacity of the pavement has reached its limit, and extensive rehabilitation/reconstruction with long time traffic blocking should be considered. The three following issues on concrete rehabilitation/reconstruction will be discussed: (1) economic comparison of asphalt inlay and asphalt overlay, (2) economic comparison preventive overlay on a section which is currently good and routine overlay on the section which will be poor, and (3) economic analysis of early-strength concrete when it is used in concrete reconstruction. METHODS : First, various life cycle cost analysis tools were compared, and the proper tool for the extensive rehabilitation/reconstruction was selected. Second, a sensitivity analysis of the selected tool was performed to find the influential input variables, which should be carefully selected in the analysis. Third, three case studies, which can be issues in the rehabilitation/reconstruction of the expressway concrete pavement in Korea, were performed. RESULTS : Asphalt overlay without milling the deteriorated concrete showed 18~25% lower life cycle cost than the current asphalt inlay with milling. The good current preventive overlay on the section was economically justified within the scope of this study. The construction cost limit of the early strength concrete was suggested to be economical for 1, 3, and 7 days of construction alternative opening. CONCLUSIONS : CA4PRS was a viable tool for comparing various rehabilitation/reconstruction issue alternatives. Several concrete issues associated with the rehabilitation/reconstruction of the deteriorated concrete pavement were discussed as mentioned above.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6128-6134
• /
• 2012

In so many real estate development projects, there were strong needs to have a powerful tool to check feasibility of those projects. But there were not enough tool and measure to cover risk of real estate development and construction. Therefore I tried to find a real tool to measure investment value of development properly and efficiently, by means of case studies of many real estate development projects. Finally I found a fact that no tools of investment value analysis are perfect and efficient to hedge all kinds of risks in projects. Especially NPV(Net Present Value) and IRR(Internal Rate of Return) were not sufficient by themselves to measure investment value. So I found out that MIRR(Modified IRR), XIRR(X-IRR), ARR(Average Rate of Return), PP(Payback Period) and so on, would be supplementaries of proper and efficient investment value analysis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.604-610
• /
• 1989

This paper is concerned with the machinability of fine ceramics(Al$_{2}$O$_{3}$) by using sintered diamond tools. For this purpose, ceramics cutting experiments under various cutting conditions such as cutting speed, feed rate, and others were carried out. The main results are follows : (1) During the cutting of fine ceramics, the used tools were found to be slightly chattering at cutting speed of 70m/min, and at cutting speed of higher than this I found the fine ceramics difficult to be cut. (2) When I used a tool with large nose radius, there occured a small amount of wear on the flank of the tool. However, at the early stage of fine ceramics cutting, the tools with smaller nose radii were required mainly to prevent the chipping of the ceramics. (3) When the materials were dry-cut, the appropriate cutting speel was found to be lower than 40m/min, and when the materials were dry-cut, I could cut them without any difficulty even at the speed of 70m/min, the surface roughness of ceramics cut at the speed of 70m/min was considerly fine. (4) It is generally believed that the principal cutting force is the largest in the case of steels cutting, but I found the thrust cutting force to be larger than any other cutting forces in the case of ceramics cutting.

• The Journal of the Korea Contents Association
• /
• v.11 no.2
• /
• pp.495-506
• /
• 2011

Portfolio has recently come to gain more attention from school as an alternative evaluation tool and a self-reflective learning tool for learning. After literature reviews about the case studies on the use of portfolio in higher education including both universities in Korea and abroad, this study attempted, first, to analyze the current e-portfolio system running in Kyung Hee University for the undergraduate students starting from the spring semester, 2010, and then, suggested the ways the system can be more actively utilized among the students, and simultaneously, acquiring more interest and participation from both the faculty members and the school administrators. The data collected from the survey and reflective journals of the students suggested 1) more user-friendly, easy-to-edit version of the system, 2) more diverse modes and functions of the system which, therefore, are able to adjust well to the specific and unique features of subjects or majors of the students, and 3) collaborative learning environments among the students and between the students and the faculty members from which students can share, participate, interact with each other, getting useful feedback from those co-learners and faculty members. Eventually the study aimed to enhance the recognition of the participants about the importance of portfolio as a learning tool for self-reflective learning and authentic evaluation of the students.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.347-356
• /
• 2019

Recently, the liberalization of industrial control systems has been accompanied by a major change in the structural paradigm of information systems in the public and public sectors, and potential cyber security problems in the future major infrastructure control systems that cannot respond to the level of security of existing information systems. To cope with this, a cyber security evaluation tool that can evaluate security vulnerability in three dimensions against various infrastructure control system environment is needed. However, a cyber security evaluation in the domestic environments does not have the concept of the current security status and satisfy settings of the infrastructure. Also, the most of items in that environments have had short-term inspection themselves which makes a limitation by a technical area. In order to overcome this problems, many researches are needed to apply CSET (Cyber Security Evaluation Tool) which is the US cyber security evaluation tool to the control environment of various domestic infrastructure. In this paper, first, we analyze methods to apply to the major domain through the analysis of various case studies on existing security assessement tools. Finally, we discuss future directions.