• 한국터널지하공간학회 논문집
• /
• 제19권5호
• /
• pp.813-827
• /
• 2017

터널 내의 CCTV 영상은 동적으로 변화하는 요소들에 의해 영향을 받는 다양한 영상들을 촬영한다. 또한, 카메라의 상태 또한 관리 및 배치가 쉽지 않아 터널 내부 환경 변화에 따라 영상이 달라지는 경향이 있다. 본 논문에서는 터널 내에 설치된 CCTV 카메라 영상을 이용해 차량을 탐지하고 그 차량을 지속적으로 추적하는 새로운 방법을 소개한다. 터널 내 CCTV 카메라 영상은 모션블러 효과와 먼지로 인한 렌즈 흐려짐 효과로 인해 바로 차량을 탐지할 수 없다는 문제점이 있다. 본 논문에서는 이를 극복하기 위해 차영상/비-최대 억제 기법과 Haar Cascade 기법 등에 대한 효과 검토 실험을 제안하고 수행하였다. 본 논문에서 제안하는 방법을 통해 터널 내에 설치된 CCTV에서 차량의 탐지와 추적을 효과적으로 수행할 수 있으며 다양한 터널 유고상황을 자동으로 파악하기 위한 중요 정보를 확보할 수 있었다.

• 대한기계학회논문집B
• /
• 제29권4호
• /
• pp.495-503
• /
• 2005

Experiments were conducted in a low speed stationary annular cascade to investigate local heat transfer characteristics on the tip and shroud and the effect of inlet Reynolds number on the tip and shroud heat transfer. Detailed mass transfer coefficients on the blade tip and the shroud were obtained using a naphthalene sublimation technique. The turbine test section has a single stage composed of sixteen guide vanes and blades. The chord length and the height of the tested blade are 150 mm and about 125 mm, respectively. The blade has flat tip geometry and the mean tip clearance is about $2.5{\%}$of the blade chord. The inlet flow Reynolds number based on chord length and incoming flow velocity is changed from $1.0{\times}10^{5}\;to\;2.3{\times}10^{5}.$ to investigate the effect of Reynolds number. Flow reattachment after the recirculation near the pressure side edge dominates the heat transfer on the tip surface. Shroud surface has very intricate heat/mass transfer distributions due to complex flow patterns such as acceleration, relaminarization, transition to turbulent flow and tip leakage vortex. Heat/mass transfer coefficient on the blade tip is about 1.7 times as high as that on the shroud or blade surface. Overall averaged heat/mass transfer coefficients on the tip and shroud are proportional to $Re_{c}^{0.65}\;and\;Re_{c}^{0.71},$ respectively.

• 융합정보논문지
• /
• 제12권3호
• /
• pp.294-301
• /
• 2022

본 연구에서는 열전발전기에 장착된 열전소자 간의 불균일한 온도편차에 의해 발생하는 부정합 손실을 저감할 수 있는 Multi-layer Cascade (MLC) 전기연결 방법을 제안한다. MLC의 성능을 검증하기 위해 열유동 현상 뿐만 아니라 열전소자에서 발생하는 다중물리현상을 반영한 수치해석 모델을 개발하였다. MLC는 고온도차를 경험하는 소자와 저온도차를 경험하는 소자를 서로 다른 Layer에 배치하여 구현할 수 있으며, 고온도차 소자와 저온도차 소자의 분류에는 수치해석 모델을 통해 얻어진 소자별 고온부 표면 온도를 활용하였다. MLC를 구성하는 각 Layer의 전기분선 비율을 변화시키며 이상적인 열전발전 성능과의 비교를 통해 MLC의 부정합손실 저감특성을 확인하였다. 최적 분선비율로 구성한 MLC의 경우 이상적인 결과 대비 96.5%의 발전성능을 보였으며, 열원의 유량이 적거나 발전시스템의 크기가 증가하여 소자 간의 온도편차가 클수록 부정합손실 저감효과가 더욱 증가하는 것을 확인하였다.

• 한국유체기계학회 논문집
• /
• 제7권6호
• /
• pp.38-44
• /
• 2004

In this study, the overall performance and the effect of the tip leakage flow of the centrifugal compressor with a refrigerant HFC-l34a were numerically studied using CFX-TASCflow. To study the effect of the tip leakage flow, the numerical study of the overall performance of HFC-l34a centrifugal compressor with a cascade diffuser was preceded and compared with the experimental result. Six different tip clearances were used to consider the influence of the tip clearance on the performance. The tip leakage flow was illustrated for qualitative discussion. The results obtained in this study can be applied to the determination of the cold clearance.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.451-456
• /
• 2003

In this study, the overall performance and the effect of the tip leakage flow of the centrifugal compressor with the refrigerant HFC-l34a were numerically studied using CFX-TASCflow. To study the effect of a tip leakage flow, the numerical study of the overall performance of HFC-l34a centrifugal compressor with a cascade diffuser was preceded and compared with experimental result. Six different tip clearances were used to consider the influence of a tip clearance on performance. The tip leakage flow was illustrated for qualitative discussion. The results obtained in this study can be applied to the determination of the cold clearance.

• Journal of Radiation Protection and Research
• /
• 제29권4호
• /
• pp.263-268
• /
• 2004

한국원자력연구소에서 감마선과 전자를 동시측정하기 위한 목적으로 제작된 Prototype phowich를 이용하여 감마선에 대한 섬광체의 비선형성에 대한 연구를 수행하였다. 제작된 Prototype phoswich는 $2'{\times}2'$ CsI(Tl)와 Plastic scintillator 그리고 하나의 PMT로 구성되어 있다. 몬테칼로 방법을 이용하여 $^{137}Cs$과 $^{60}Co$ 선원의 Prototype phoswich 계측기의 반응함수(Detector Response Function, 이하 DRF)를 구하였으며 이를 점증하기 위하여 제작된 Prototype phoswich를 이용, 실험을 통하여 DRF를 구한 뒤 비교하였다. 계측기의 DRF를 정확하게 모사하기 위하여 CsI(Tl) 섬광체의 Electron response와 섬광체 내에서의 광전효과를 고려하는 Simplified elec윤on cascade sequence 정보를 이용하여 CsI(Tl) 섬광체의 감마선에 대한 비선형성을 계산하였다. $^{137}Cs$ 선원의 경우 전산모사를 통하여 구한 DRF 결과는 실험값과 비교적 잘 일치함을 알 수 있었으나 $^{60}Co$의 경우에는 선원의 결과와는 달리 전산모사 결과와 실험값에 약간의 차이가 남을 알 수 있었다. 이는 $^{137}Cs$ 선원과는 달리 $^{90}Co$은 1.17 MeV와 1.13 MeV 두 개의 광자를 동시에 방출하기 때문에 동시효과에 의한 불착실성 등이 그 외 다른 불확실성 등과 함께 증폭되어 나타나기 때문이다. 본 연구를 통해 Phoswich내 CsI(Tl)의 감마선 비선형성에 대한 분석을 수행하였으며 이를 통하여 비선형성이 고려된 개선된 Phoswich DRF를 생산하고 이를 실험값과 비교 검증할 수 있었다. 섬광체의 Electron channel운g effect, Doppler broadening effect 및 Transfer resolution 등과 같은 후속연구가 추가된다면 좀더 정확한 Phoswich의 DRF를 전산 모사하는 것이 가능해질 것이다.

• 대한기계학회논문집B
• /
• 제29권6호
• /
• pp.696-702
• /
• 2005

The effect of incidence angle on the endwall heat (mass) transfer characteristics within a turbine rotor cascade passage has been investigated by employing the naphthalene sublimation technique. The experiments are carried out at the Reynolds number of $2.78{\times}10^5$ for two incidence angles of -5 and 5 dog. The result shows that the incidence angle has a considerable influence on the transport phenomena over the endwall. The positive incidence angle tends to promote development of the pressure-side leg of a leading-edge horseshoe vortex. The endwall thermal load is augmented by 7.5 percents at i = -5 deg but is reduced by 2.5 percents at i = 5 deg, in comparison with that at the design condition.

• 한국대기환경학회지
• /
• 제11권3호
• /
• pp.291-298
• /
• 1995

An intensive field study was carried out during Aug. 1993 in Seoul to study the characteristics of summertime visibility and diurnal trend of ionic composition of ambient particles. A transmissometer, nephelometer with heated and unheated inlets, PM3 fine particle sampler, and cascade impactor were used to measure optical and particle properties of ambient air. During this study period, a weak smog episode has occurred. Light scattering by particles is the most dominant factor on total light extinction. The effect of light absorption by particles in Seoul is much higher than other major cities in U.S.A. throughout the summer and fall with relatively constant values. The effect of water on $b_{sp}$ was small during the period. The particle size distribution shows a typical bimodal one. Sulfate, ammonium, chloride, and nitrate are the major chemical species in fine fraction aerosols, about 30% of toral mass concentration. Concentraion of sulfate is higher during the daytime while those of nitrate and chloride are higher during the nighttime. Ammonium concentration is constant through the daytime.

• 대한기계학회논문집B
• /
• 제31권4호
• /
• pp.357-366
• /
• 2007

The present study investigated local heat/mass transfer characteristics on the surface of the rotating turbine blade with various incidence angles. The experiments are conducted in a low speed annular cascade with a single stage turbine. The blade has a flat tip with the mean tip clearance of 2.5% of the blade chord. A naphthalene sublimation method is used to measure detailed mass transfer coefficient on the blade. At design condition, the inlet Reynolds number is $Re_c=1.5{\times}10^5$ which results in the blade rotation speed of 255.8 rpm. Also, the effect of off-design condition is examined with various incidence angles between $-15^{\circ}$ and $+7{\circ}$. The results indicated that the incidence angle has significant effects on the blade surface heat transfer. In mid-span region, the laminar separation region on the pressure side is reduced and the laminar flow region on the suction side shrinks with increasing incidence angle. Near the tip, the effect of tip leakage flow increases in span wise and axial directions as the incidence angle decreases because the tip leakage flow is formed near the suction side surface. However, the effect of tip leakage flow is reduced with positive incidence angle.

• Journal of Information Technology Applications and Management
• /
• 제14권4호
• /
• pp.97-120
• /
• 2007

Development of information technology and Internet brought big changes in information society. Quantity of information increased rapidly and various types of information were presented through diverse channels. This change brought an impact in electronic commerce environment. A large number of products are transacted in online market. And various search functions and product information are presented for supporting customer's decision making. This study examined the effect of external information on purchase decision-making in electronic commerce environment. An experiment was conducted to see the customer product review, unit sales, etc. on purchase decision-making process in online shopping mall based electronic commerce. As a result of study, external information referring to number of purchasing, positive product review, and reliability of information has a positive effect on purchase-decision. The significance of the study can be found in that it defined 1) external information has an effect on decision-making, 2) positiveness and reliability of product information showed that they have an influence on customer, and 3) when self opinion and other person's opinion are different, one is not satisfied with decision making process. The results of the study can be of practical use in the design and implementation of online shopping mall in electronic commerce.